diff --git a/examples/sgsnemu.conf b/examples/sgsnemu.conf
new file mode 100644
index 0000000..c378da1
--- /dev/null
+++ b/examples/sgsnemu.conf
@@ -0,0 +1,102 @@
+##############################################################################
+#
+# Sample sgsnemu configuration file
+#
+##############################################################################
+
+# TAG: fg
+# Include this flag if process is to run in the foreground
+#
+fg
+
+# TAG: debug
+# Include this flag to include debug information.
+#debug
+
+
+# TAG: conf
+# Configuration file to use. This file is the configuration file, 
+# so changing this parameter in the configuration file does not make
+# sense. Use it on the command line instead.
+
+# TAG: pidfile
+# File to store information about the pricess id of the program.
+# The program must have write access to this file/directory.
+#pidfile ./sgsnemu.pid
+
+# TAG: statedir
+# Directory to use for nonvolatile storage. 
+# The program must have write access to this directory.
+#pidfile ./sgsnemu.pid
+
+
+# TAG: dns
+# DNS server to use for ns lookups.
+# If this tag is not set the system default DNS will be used.
+#pidfile ./sgsnemu.pid
+
+# TAG: listen
+# Specifies the local IP address to listen to
+listen 10.0.0.220
+
+# TAG: remote
+# Specifies the remote IP address to connect to
+# If DNS is setup correctly it should be possible to specify the 
+# access point name (APN) as the remote address.
+remote 10.0.0.240
+
+# TAG: net
+# IP network address of external packet data network
+# This tag is used for setting up routing at the emulator
+#net 192.168.0.0
+
+# TAG: mask
+# IP network mask of external packet data network
+# This tag is used for setting up routing at the emulator
+#mask 255.255.255.0
+
+
+# TAG: contexts
+# Use of this tag is EXPERIMENTAL
+# Number of contexts to establish from the emulator to the ggsn.
+# Set this tag to zero to not establish any contexts.
+#contexts 1
+
+# TAG: static
+# Use of this tag is EXPERIMENTAL
+# Use this flag if you do not want to set dynamic tun interfaces.
+# If this flag is set a single network interface is established.
+#contexts 1
+
+# TAG: timelimit
+# Disconnect contexts after timelimit seconds, and exit the program.
+# Setting timelimit to zero will cause the program not to disconnect.
+#timelimit 0
+
+
+# TAG: apn
+# Access point name to connect to when run in client mode.
+#apn internet
+
+# TAG: imsi
+# IMSI number used when run in client mode.
+#imsi 2400101234567890
+
+# TAG: msisdn
+# MSISDN number used when run in client mode.
+#msisdn 46702123456
+
+# TAG: qos
+# Requested Quality of Service used when run in client mode.
+# 3 bytes corresponding to ????
+#qos 0x0b921f
+
+# TAG: uid
+# User ID used when run in client mode.
+#uid mig
+
+# TAG: pwd
+# Password used when run in client mode.
+#pwd hemlig
+
+