- a1304ee gbproxy: Remove SGSN-side BVC after sending BVC-BLOCK by Daniel Willmann · 3 years ago
- 00eddca debian/control: remove dh-systemd build-depend by Oliver Smith · 3 years, 1 month ago
- 5f76259 gbproxy_ctrl: Ignore SIG-BVCI in ctrl commands by Daniel Willmann · 3 years, 2 months ago
- 5e8c0e8 gbproxy_ctrl: Fix crash in nsvc-state ctrl command by Daniel Willmann · 3 years, 2 months ago
- a631a3a gbproxy_peer: Free a cell as soon as no BSS BVC uses it by Daniel Willmann · 3 years, 3 months ago
- 990b151 gbproxy_peer: Set rate_ctr name for gbproxy_peer stats by Daniel Willmann · 3 years, 3 months ago
- f024eeb gbproxy: Forward MS_REGISTR_ENQ/_RESP correctly by Daniel Willmann · 3 years, 3 months ago
- 361d0b5 gbproxy: Add usage flag to the imsi_cache by Daniel Willmann · 3 years, 3 months ago
- f50aa80 manual: Add chapter describing osmo counters in general by Daniel Willmann · 3 years, 3 months ago
- 78f3a12 manual: Add section describing show gbproxy command usage by Daniel Willmann · 3 years, 3 months ago
- 226e6cb gbproxy_vty: Remove redundant command "show gbproxy links" by Daniel Willmann · 3 years, 3 months ago
- 9d98e7c manual: Update counters, add proper chapter for counters by Daniel Willmann · 3 years, 4 months ago
- 5643836 Use new stat item/ctr getter APIs by Pau Espin Pedrol · 3 years, 4 months ago
- 37518b3 Don't route messages to an SGSN if it is down by Daniel Willmann · 3 years, 4 months ago
- a429634 Avoid sending tx_status upon rx of RIM messages by Pau Espin Pedrol · 3 years, 5 months ago
- a45608f examples/osmo-gbproxy.cfg: fix osmo-sgsn conflict by Oliver Smith · 3 years, 5 months ago 2021q1
- 5b75f85 examples/manuals: Improve/update ns-related documentation by Daniel Willmann · 3 years, 5 months ago
- fff8685 gbproxy_main: Process options after all initialization is done by Daniel Willmann · 3 years, 5 months ago
- 27dcd33 gitignore: add gbproxy_vty_reference.xml by Oliver Smith · 3 years, 6 months ago
- 9c46926 doc: include gb-ns2.adoc, not gb-variants.adoc by Oliver Smith · 3 years, 6 months ago
- 838ebb3 vty: Print CellId along with RA-ID by Harald Welte · 3 years, 6 months ago
- 6701d27 gb_proxy: Ensure cell info is up to date when receiving PTP-BVC reset by Daniel Willmann · 3 years, 6 months ago
- 76aa06e gbproxy_main: Add ctrl vty commands by Daniel Willmann · 3 years, 6 months ago
- 1f3470f gbproxy: Don't free NSE/BVC0 if SGSN NSE goes down by Daniel Willmann · 3 years, 7 months ago
- a16ecc3 Remove osmo-sgsn relics by Daniel Willmann · 3 years, 7 months ago
- f96cac5 Handle GPRS_NS2_AFF_CAUSE_FAILURE by Daniel Willmann · 3 years, 7 months ago
- 38b9c9a Update the max_sdu_len from NS by Daniel Willmann · 3 years, 7 months ago
- 04075ec gb_proxy.h: Use pragma once instead of ifndef by Daniel Willmann · 3 years, 7 months ago
- 429c43c Remove some outdated TODO/comments by Daniel Willmann · 3 years, 7 months ago
- f06b481 manuals: Regenerate counters/VTY through docker by Daniel Willmann · 3 years, 7 months ago
- b643765 manual: Update manuals, include sgsn pooling and NS variants by Daniel Willmann · 3 years, 7 months ago
- 349b78e gbproxy_main: Fix naming bsc_hack/nsip_proxy -> (osmo-)gbproxy by Daniel Willmann · 3 years, 7 months ago
- 52461cf Support setting rt-prio and cpu-affinity mask through VTY by Pau Espin Pedrol · 3 years, 7 months ago
- f89d4f8 Bump version: 0.0.1.21-b968-dirty → 0.1.0 by Pau Espin Pedrol · 3 years, 7 months ago 0.1.0
- b968c5f gitignore: Ignore autofoo files *~ by Pau Espin Pedrol · 3 years, 7 months ago
- f8cba65 gbproxy: Use bssgp2_enc_status when sending STATUS by Daniel Willmann · 3 years, 8 months ago
- a8b6165 Add SDU length for an NSE (== BSSGP PDU size) by Daniel Willmann · 3 years, 8 months ago
- a8fa567 d/changelog: set epoch=1 by Oliver Smith · 3 years, 8 months ago
- 2689c6e Move vty node into gbproxy_vty.c by Daniel Willmann · 3 years, 8 months ago
- 86ee31a Remove unused log categories by Daniel Willmann · 3 years, 8 months ago
- 44fa201 gbproxy: Use bssgp2_nsi_tx_ptp in gbprox_relay2nse by Daniel Willmann · 3 years, 8 months ago
- 1ac920b Remove trailing whitespace by Daniel Willmann · 3 years, 8 months ago
- 4499cf4 gb_proxy: fix wrong usage of bssgp_rim_ri_name() by Philipp Maier · 3 years, 8 months ago
- 1c5766b gb_proxy: add support for relaying BSSGP RIM messages by Philipp Maier · 3 years, 8 months ago
- 3ea3793 Various comment/whitespace changes by Daniel Willmann · 3 years, 8 months ago
- fe5d3b7 gbproxy_vty: Fix NRI overlap behaviour to match osmo-bsc by Daniel Willmann · 3 years, 8 months ago
- 6cfedc4 gbproxy_vty: Fix NRI VTY help MSC->SGSN by Daniel Willmann · 3 years, 8 months ago
- 74882dc gb_proxy: extend TLV parser by Philipp Maier · 3 years, 8 months ago
- e4597ec gb_proxy_peer: Require ra_id and cid in gbproxy_cell_alloc by Philipp Maier · 3 years, 8 months ago
- e7eabd3 debian/copyright: Drop osmo-sgsn.git leftover files from list by Pau Espin Pedrol · 3 years, 8 months ago
- a8da650 Drop c-ares references by Pau Espin Pedrol · 3 years, 8 months ago
- 99adf1a gb_proxy_peer: Remove unused function gbproxy_cell_by_bvci_or_new by Philipp Maier · 3 years, 8 months ago
- fccbef0 gb_proxy_peer: Add Function to get gbproxy cell by cell id by Daniel Willmann · 3 years, 8 months ago
- da3af94 gb_proxy: simplify raid data storage by Philipp Maier · 3 years, 8 months ago
- 55a22b8 gb_proxy_ctrl: use mcc-mnc-lac-rac notation instead mcc,mnc,lac,rac by Philipp Maier · 3 years, 8 months ago
- 3385506 Bump version: 0.0.0 → 0.0.1 by Oliver Smith · 3 years, 8 months ago 0.0.1
- cd3e8e6 contrib/osmo-gbproxy.spec.in: fix config paths by Oliver Smith · 3 years, 8 months ago
- 882049d debian: fix installing pdfs for -doc package by Oliver Smith · 3 years, 8 months ago osmith/wip
- df0507e Update README to cover osmo-gbproxy and not osmo-sgsn by Harald Welte · 3 years, 8 months ago
- 383baca contrib/jenkins.sh: adjust to osmo-gbproxy split by Oliver Smith · 3 years, 8 months ago
- 936dfd7 Further clean-up in osmo-sgsn -> osmo-gbproxy migration by Harald Welte · 3 years, 8 months ago
- 29532c2 === Split osmo-gbproxy from osmo-sgsn === by Oliver Smith · 3 years, 8 months ago
- 3c75624 follow libosmocore/gprs_ns2 API changes (gprs_ns2_dynamic_create_nse) by Alexander Couzens · 3 years, 8 months ago
- 571eb95 sgsn: migrate to the new gprs_ns2_vty configuration by Alexander Couzens · 3 years, 8 months ago
- b363e21 gbproxy: follow gprs_ns2 API vty changes by Alexander Couzens · 3 years, 8 months ago
- 852ebad manuals/gbproxy: Move pooling to separate chapter by Daniel Willmann · 3 years, 8 months ago
- ae303b4 manuals/gbproxy: MSC -> SGSN for pooling chapter by Daniel Willmann · 3 years, 8 months ago
- 22248f3 manuals/gbproxy: Add osmo-bsc MSC pooling chapter from Neels as a base by Daniel Willmann · 3 years, 8 months ago
- 1296972 manuals/gbproxy: Update configuration chapter by Daniel Willmann · 3 years, 8 months ago
- fcf0abb Rename OsmoGbPROXY -> *Proxy by Daniel Willmann · 3 years, 8 months ago
- 7061bed manual/gbproxy: Update overview chapter by Daniel Willmann · 3 years, 8 months ago
- e30985e gbproxy: Avoid depending on any of the SGSN code by Harald Welte · 3 years, 8 months ago
- 55c36f9 follow libosmocore/gprs_ns2 API changes of GPRS enums by Alexander Couzens · 3 years, 8 months ago
- 8b3ed29 gbproxy: Fix radio status routing by TMSI by Daniel Willmann · 3 years, 8 months ago
- cd21afe gbproxy: Improve log messages in gbproxy_select_sgsn by Daniel Willmann · 3 years, 8 months ago
- 8266918 gbproxy: Print the correct message type for dummy paging/paging reject by Daniel Willmann · 3 years, 8 months ago
- 5614e57 gbproxy: Use IMSI cache for PTP paging and implement DUMMY_PAGING_PS by Daniel Willmann · 3 years, 8 months ago
- 9b367d2 gb_proxy: Don't use orphan log subsystem DPCU by Harald Welte · 3 years, 8 months ago
- f2812fb gbproxy: Add VTY commands to query the TLLI/IMSI cache by Daniel Willmann · 3 years, 8 months ago
- 2c758f2 gbproxy: Define and use help string for gbproxy by Daniel Willmann · 3 years, 8 months ago
- 182a0b6 gbproxy: Fix VTY cmd name by Daniel Willmann · 3 years, 8 months ago
- d0f2626 gbproxy: Remove unused variable assignment by Daniel Willmann · 3 years, 8 months ago
- 9170c34 gbproxy: Move helper function to a more logical place by Daniel Willmann · 3 years, 8 months ago
- 5193f22 gbproxy: Use C-style comments by Daniel Willmann · 3 years, 9 months ago
- 8613c9d gbproxy: Use IMSI cache to handle PAGING_PS_REJECT by Daniel Willmann · 3 years, 8 months ago
- c8a5009 gbproxy: Implement IMSI cache by Daniel Willmann · 3 years, 8 months ago
- 3f64c7f contrib/jenkins: don't build osmo-gsm-manuals by Oliver Smith · 3 years, 9 months ago
- bd12f3f gbproxy: Increase TLLI cache timeout to 10s by Daniel Willmann · 3 years, 9 months ago
- 77493b1 gbproxy: Implement TLLI cache and use it for SUSPEND/RESUME by Daniel Willmann · 3 years, 9 months ago
- 78e56f1 configure.ac: define a c standard instead of using the compilers default by Alexander Couzens · 3 years, 9 months ago
- 3c56a2a Fix gbproxy_sgsn_by_tlli wraparound by Daniel Willmann · 3 years, 9 months ago
- 6964e88 gb_proxy_peer: fix NULL pointer dereference in gbproxy_sgsn_alloc() by Vadim Yanitskiy · 3 years, 9 months ago
- 4dba67a gb_proxy_peer: sgsn can never be NULL in gbproxy_sgsn_by_nri() by Vadim Yanitskiy · 3 years, 9 months ago
- b387c1e gbproxy: Add VTY command to override the node selection function by Daniel Willmann · 3 years, 9 months ago
- a648f3c gbproxy: Add config option to name an SGSN by Daniel Willmann · 3 years, 9 months ago
- 7305ba3 gbproxy: use ns2 vty2 by Alexander Couzens · 3 years, 9 months ago
- 008de61 sgsn: Use the new NS2 api by Alexander Couzens · 4 years, 2 months ago
- 02d7c48 gbproxy: Fix build on Deiban 8 by Harald Welte · 3 years, 9 months ago
- 216dff8 gbproxy: Add comments to sgsn functions by Daniel Willmann · 3 years, 9 months ago
- d4ab1f9 gbproxy: Add SGSN pooling support by Daniel Willmann · 3 years, 9 months ago