Gitiles
Code Review
Sign In
gerrit.osmocom.org
/
osmo-gbproxy
/
270434eb9ebefacbc56a933ac02ac2f95b7ec4c5
/
openbsc
« Previous
260646d
vty: Use \r\n in the copyright messages
by Holger Hans Peter Freyther
· 14 years ago
971532f
bsc: Set the copyright for the real BSC.
by Holger Hans Peter Freyther
· 14 years ago
343b945
[paging] Implement the counting for TCH/H and TCH/F
by Holger Hans Peter Freyther
· 14 years ago
3112f67
[paging] Only page if we have some free channels right now
by Holger Hans Peter Freyther
· 14 years ago
c814ae9
[paging] Continuisly send paging commands.
by Holger Hans Peter Freyther
· 14 years ago
e791d95
[paging] When giving credit try to send out paging requests too.
by Holger Hans Peter Freyther
· 14 years ago
e7be13c
[paging] When we ran down to 0 available paging slots start a credit timer
by Holger Hans Peter Freyther
· 14 years ago
c562888
vty: Fix build due to merge issue.
by Holger Hans Peter Freyther
· 14 years ago
b6b9d70
chan: Add configuration to handle paging any with TCH
by Holger Hans Peter Freyther
· 14 years ago
f0f37f1
chan: Store the to be assigned channel type in the GSM Network.
by Holger Hans Peter Freyther
· 14 years ago
21d63ff
bsc_init: Allow DTXu and enable DTXd on RSL (experimental)
by Holger Hans Peter Freyther
· 14 years ago
db39203
[alloc] Assign a TCH for LU when all SDCCHs are occupied.
by Holger Hans Peter Freyther
· 14 years ago
b9ca9a7
nat: Use ':' to separate the message and strerror
by Holger Hans Peter Freyther
· 14 years ago
7653d35
vty: CONFIG_NODE is the anchor and should not be treated as config.
by Holger Hans Peter Freyther
· 14 years ago
ba289d0
vty: Add the config node code to everyone.
by Holger Hans Peter Freyther
· 14 years ago
85e41b3
channel_release: First attempt to update the doc to new code.
by Holger Hans Peter Freyther
· 14 years ago
2a5b796
nat: We have 1 to 31 available to the BSC.
by Holger Hans Peter Freyther
· 14 years ago
4e6129a
nat: Replace the MGCP Endpoint if that is required
by Holger Hans Peter Freyther
· 14 years ago
6dc928e
nat: Use different static transaction numbers for the DLCX/MDCX message
by Holger Hans Peter Freyther
· 14 years ago
14f728e
nat: Document that the MDCX message is not implemented
by Holger Hans Peter Freyther
· 14 years ago
2b5ae6b
nat: Send the right MDCX down the stream
by Holger Hans Peter Freyther
· 14 years ago
60bfe4e
nat: Remove the code that is wrongly placed..
by Holger Hans Peter Freyther
· 14 years ago
d04d365
nat: Close the right endpoint down the stream.
by Holger Hans Peter Freyther
· 14 years ago
8c61f79
nat: Add vty command to show the endpoint allocation status
by Holger Hans Peter Freyther
· 14 years ago
926c5fd
nat: Attempt to assign the BSC Timeslot based on a free list
by Holger Hans Peter Freyther
· 14 years ago
bf2e1b5
nat: Remove the CRCX value from the nat
by Holger Hans Peter Freyther
· 14 years ago
aa86161
nat: Reindent the code, no functional change
by Holger Hans Peter Freyther
· 14 years ago
7089d53
nat: Make the code work in terms of endpoints instead of timeslot/multiplex
by Holger Hans Peter Freyther
· 14 years ago
bec108e
nat: Use the bsc_timeslot when talking to the BSC downstream
by Holger Hans Peter Freyther
· 14 years ago
f6037e2
mgcp: Add method to go back from endpoint to multiplex/timeslot
by Holger Hans Peter Freyther
· 14 years ago
f044376
mgcp: Speculative mgcp fix...
by Holger Hans Peter Freyther
· 14 years ago
599a957
[gprs] Add option parsing to SGSN
by Harald Welte
· 14 years ago
651789c
debian: add init script, /etc/default file and example config files
by Harald Welte
· 14 years ago
279db3a
debian: make more dependencies explicit in 'control' file
by Harald Welte
· 14 years ago
19ce77c
vty: Provide a is_config_node for the VTY and use it for the bsc
by Holger Hans Peter Freyther
· 14 years ago
c4ae176
Introduce '-D' commandline option to daemonize processes
by Harald Welte
· 14 years ago
f1c9ae1
debian: don't buld arch-independent packages with executables in them
by Harald Welte
· 14 years ago
dd79dc2
debian: don't use override_dh_* for lenny compatibility
by Harald Welte
· 14 years ago
49b8ab9
debian: add build dependency to pkg-config
by Harald Welte
· 14 years ago
08e0e20
debian: add runtime dependency to libdbd-sqlite3
by Harald Welte
· 14 years ago
0374056
debian: add build dependency to libdbi0-dev
by Harald Welte
· 14 years ago
ade87dd
bsc_init: Compare it with the right enum type
by Holger Hans Peter Freyther
· 14 years ago
95f4206
Add 'debian' directory containing debian packaging information
by Harald Welte
· 14 years ago
03b2444
Add gprs_sndcp.h to noinst_HEADERS
by Harald Welte
· 14 years ago
9aa29b5
gsm48: Add method to send a separate facility message...
by Holger Hans Peter Freyther
· 14 years ago
5e22b9b
[GPRS NS] Fix memory leak in gprs_ns_sendmsg() error path
by Harald Welte
· 14 years ago
175b9a1
mgcp: Add a vty command to free a given endpoint.
by Holger Hans Peter Freyther
· 14 years ago
94ed60f
mgcp: Use transient errors in more cases...
by Holger Hans Peter Freyther
· 14 years ago
73d0047
mgcp: Reduce the log level to debug for these calls.
by Holger Hans Peter Freyther
· 14 years ago
e0ca9d2
nat: Do not report paging to every BTS...
by Holger Hans Peter Freyther
· 14 years ago
e3ed2be
nat: In case the downstream fails on a CRCX, ask it to do a DLCX
by Holger Hans Peter Freyther
· 14 years ago
e15223b
mgcp: Remember if the endpoint was allocated...
by Holger Hans Peter Freyther
· 14 years ago
70d18cb
mgcp: Add a callback to inform the client that an endpoint got reallocated
by Holger Hans Peter Freyther
· 14 years ago
25f64d0
nat: Use the state information for the callback.
by Holger Hans Peter Freyther
· 14 years ago
9a87782
nat: Keep the state (CRCX,MDCX,DLCX) of the operation..
by Holger Hans Peter Freyther
· 14 years ago
a9f132d
nat: Free the endpoint when we get an empty CI.
by Holger Hans Peter Freyther
· 14 years ago
526b4d3
mgcp: Make the CI uint32_t all the way to avoid mismatch
by Holger Hans Peter Freyther
· 14 years ago
cbc6354
nat: Provide information of when a msg does not contain a CI
by Holger Hans Peter Freyther
· 14 years ago
6769ea0
mgcp: Fix discovering the RTCP port with the more strict check.
by Holger Hans Peter Freyther
· 14 years ago
29e0188
mgcp: Determine the proto properly...
by Holger Hans Peter Freyther
· 14 years ago
8f76d97
bsc_msc: Remove the except code as it is wrong...
by Holger Hans Peter Freyther
· 14 years ago
6af36c0
mgcp: Add instrumentation code to find a possible port leak/bsc-fd corruption
by Holger Hans Peter Freyther
· 14 years ago
411764b
mgcp: Move the mgcp_free_endp into the right path for the CRCX failure
by Holger Hans Peter Freyther
· 14 years ago
1de4d84
mgcp: Fix a filedescriptor leak in case the bind is failing.
by Holger Hans Peter Freyther
· 14 years ago
079f033
mgcp: Enable the tap after configuring it...
by Holger Hans Peter Freyther
· 14 years ago
8fdb95e
mgcp: Add a call tap feature to forward audio to another forward port
by Holger Hans Peter Freyther
· 14 years ago
73aa514
mgcp: Patch RTP packets again if that is allowed.
by Holger Hans Peter Freyther
· 14 years ago
ff6ac96
mgcp: Get the for network/for bts flag right.
by Holger Hans Peter Freyther
· 14 years ago
935137c
mgcp: Be more strict on the source addr/source port of the bts
by Holger Hans Peter Freyther
· 14 years ago
7944f89
mgcp: Only discover the bts once, the extra check got lost
by Holger Hans Peter Freyther
· 14 years ago
774d1d3
nat: Use the mgcp_config_alloc to have defaults initialized
by Holger Hans Peter Freyther
· 14 years ago
05d8f5f
mgcp: Allow to dynamically allocate ports from a range..
by Holger Hans Peter Freyther
· 14 years ago
f330729
mgcp: Allow to have a different port allocation mode
by Holger Hans Peter Freyther
· 14 years ago
2ea9118
mgcp: Prepare to have different port allocation strategies.
by Holger Hans Peter Freyther
· 14 years ago
f2192fc
mgcp: Fix the signature of the change_cb to not carry the port.
by Holger Hans Peter Freyther
· 14 years ago
77eae16
mgcp: Separate recv from net/bts and remove autodetection
by Holger Hans Peter Freyther
· 14 years ago
84026ba
mgcp: Move the loopback code into the common send as well.
by Holger Hans Peter Freyther
· 14 years ago
10b2e7a
mgcp: Remove the receive code into a new method.
by Holger Hans Peter Freyther
· 14 years ago
cd144d5
mgcp: Move the selection of the right source port to a new method
by Holger Hans Peter Freyther
· 14 years ago
81938e9
mgcp: Allocate a different port for the networking...
by Holger Hans Peter Freyther
· 14 years ago
ee4657c
mgcp: Rename the base port to bts_base as it will be used for the bts
by Holger Hans Peter Freyther
· 14 years ago
bfb68b7
mgcp: Move the bfd for rtp/rtcp into the port
by Holger Hans Peter Freyther
· 14 years ago
083059e
mgcp: Make the function internal, only used by the init/config code
by Holger Hans Peter Freyther
· 14 years ago
d1725f4
mgcp: Rename the bind method to show it is only binding for the bts port
by Holger Hans Peter Freyther
· 14 years ago
7140dae
mgcp: Only use early bind for the BTS socket.
by Holger Hans Peter Freyther
· 14 years ago
148c5d3
mgcp: Attempt to separate the RTP/RTCP port for the Network and for the BTS
by Holger Hans Peter Freyther
· 14 years ago
fab76aa
mgcp: Group the state for bts/net into a struct and have two instances
by Holger Hans Peter Freyther
· 14 years ago
6434452
mgcp: Remove the forwarding mode as it was not used.
by Holger Hans Peter Freyther
· 14 years ago
8c0deca
mgcp: Fix the payload_type... it broke in 7cdc62c01223570441e60ec6d0dd7a92e622677b
by Holger Hans Peter Freyther
· 14 years ago
f48e4b6
nat: Fix the spelling of that comment.
by Holger Hans Peter Freyther
· 14 years ago
0957211
mgcp: Fix the reversed net/bts... which has not cause any issue..
by Holger Hans Peter Freyther
· 14 years ago
b1e9ba9
mgcp: Pass the whole endpoint to the patch method.
by Holger Hans Peter Freyther
· 14 years ago
8e2acb7
mgcp: Fix the order of the arguments...
by Holger Hans Peter Freyther
· 14 years ago
f8d117a
mgcp: Print the conn mode as well
by Holger Hans Peter Freyther
· 14 years ago
566e59b
mgcp: Disable the actual patching... this is a temporary hack
by Holger Hans Peter Freyther
· 14 years ago
eb0446b
mgcp: Print the system for the duplicate SSRC...
by Holger Hans Peter Freyther
· 14 years ago
645db9c
ipaccess-config / NWL: Decode + print neighbor cell ARFCNs
by Harald Welte
· 14 years ago
0253fe2
vty: Remove the logging command that is in libosmocore
by Holger Hans Peter Freyther
· 14 years ago
9ecec6d
nat: Show if we are connected to the MSC.
by Holger Hans Peter Freyther
· 14 years ago
0cb4fd9
nat: Count the number of connects to the MSC.
by Holger Hans Peter Freyther
· 14 years ago
Next »