Gitiles
Code Review
Sign In
gerrit.osmocom.org
/
osmo-gbproxy
/
187221e0253284e4d6c1ac1b53e22cdb8a62da5e
/
openbsc
/
src
187221e
nat: Fix some corruption in the test case
by Holger Hans Peter Freyther
· 14 years ago
b28f5a0
nat: Change number of multiplexes to the max-endpoints
by Holger Hans Peter Freyther
· 14 years ago
473b38a
nat: Allocate endpoints from multiple multiplexes.
by Holger Hans Peter Freyther
· 14 years ago
ef9d138
nat: Start making the number of multiplexes configurable
by Holger Hans Peter Freyther
· 14 years ago
9575164
nat: Allocate the endpoint status dynamically
by Holger Hans Peter Freyther
· 14 years ago
9af42c3
Use shorter vty_app_info->name for all apps
by Harald Welte
· 14 years ago
55ab246
sms: introduce new command to trigger the sending process for specific subscribers only
by Nico Golde
· 14 years ago
1c601cc
rf: Delay execution of commands
by Holger Hans Peter Freyther
· 14 years ago
d67a6b3
rf: Verify that the requested mode is entered and drop OML in error
by Holger Hans Peter Freyther
· 14 years ago
d014692
rf: Remember the last command requested on the RF CMD interface
by Holger Hans Peter Freyther
· 14 years ago
f5888a7
oml: Parse probable cause and additional text in failure reports
by Dieter Spaar
· 14 years ago
53730f6
misc: Compile fixes due 4d54d0b883dcf85cd92290dd4cea51754c70b621
by Holger Hans Peter Freyther
· 14 years ago
a72d91c
BSC: Fix empty neighbor list in case of manual SI/SI5 mode
by Harald Welte
· 14 years ago
30f93fb
Fix various compiler warnings all over the code
by Harald Welte
· 14 years ago
e2e4ce7
Install programs into $(prefix)/bin, not /sbin
by Harald Welte
· 14 years ago
bd461ab
bsc: Use msg->data and msg->len for the hexdump, pick a better name
by Holger Hans Peter Freyther
· 14 years ago
da580ec
nat: If the number starts with 00 turn it into a international number
by Holger Hans Peter Freyther
· 14 years ago
0518e72
nat: Add extra size check for the number and fail if it does not fit
by Holger Hans Peter Freyther
· 14 years ago
9645a03
bsc: core-mobile-country-code and core-mobile-network-code range is too small
by Holger Hans Peter Freyther
· 14 years ago
58bef96
LOGGING: make sure to make the 'logging filter' compatible with vty log cfg
by Harald Welte
· 14 years ago
f989b78
Allow configuration of SI5 neighbor list != SI2 neighbor list
by Harald Welte
· 14 years ago
10de30b
add example openbsc.cfg for RBS2308 with 4TRX
by Harald Welte
· 14 years ago
50f7e53
DAHDI: Automatically switch signalling slots to HDLC + FCS mode
by Harald Welte
· 14 years ago
c72ba48
OM2000: Make sure the IS and CON lists are kept in order
by Harald Welte
· 14 years ago
41ebd5b
DAHDI: usse lower-case name to parse correctly by vty code
by Harald Welte
· 14 years ago
bf7a534
OM2000/RBS2000: Make IS+CON configuration persistent in config file
by Harald Welte
· 14 years ago
c02789e
VTY: Allow for per-BTS-model specific config file write functions
by Harald Welte
· 14 years ago
3b3e7bb
LAPD: keep sent/receive sequence numbers per SAPI, not just per TEI
by Harald Welte
· 14 years ago
f5dbc3c
OM2000: Handle various ACKs better, implement CON CONF REQ
by Harald Welte
· 14 years ago
c584504
OM2000: Route outgoing NM message depending on MO
by Harald Welte
· 14 years ago
0f91620
OM2000: Complete the VTY help message for OM2000 MO commands
by Harald Welte
· 14 years ago
a552655
OM2000: Allow configuration of CON from VTY
by Harald Welte
· 14 years ago
738310b
OM2000: Allow VTY based configuration of IS connection groups
by Harald Welte
· 14 years ago
e3eb646
OM2000: Don't send START REQ in response to FAULT REP
by Harald Welte
· 14 years ago
0b00600
INPUT: Disable the per-TRX OML Link for now
by Harald Welte
· 14 years ago
436b8cf
RBS2000: Differentiate between BTS OML and TRX OML
by Harald Welte
· 14 years ago
586d770
INPUT: Include TEI + SAPI in E1 INPUT SIGNAL
by Harald Welte
· 14 years ago
caeb9bc
INPUT: Allow for a per-TRX OML link
by Harald Welte
· 14 years ago
0d4cc33
RBS2000: fix compiler warning about unhandled enum in switch()
by Harald Welte
· 14 years ago
1d401e7
OM2000: Configure the IS to route both TRX0 and TRX1
by Harald Welte
· 14 years ago
8dc6d4f
LAPD: Make sure we don't re-start SABM timer for INACTIVE SAPs
by Harald Welte
· 14 years ago
6e4fd61
RBS2000: Generate per-TRX OML link
by Harald Welte
· 14 years ago
5434bfa
DAHDI: Deliver ALARM/NOALARM as input signal to RBS2000 driver
by Harald Welte
· 14 years ago
252748a
OM2000: Make sure we ACK an ENABLE RESULT
by Harald Welte
· 14 years ago
0303a36
RBS2000: Move SABM re-transmit logic into LAPD code
by Harald Welte
· 14 years ago
986efc8
RBS2000: Make sure we transmit SABM at 0.3 second intervals
by Harald Welte
· 14 years ago
60acee2
OM2000: Use om2k in VTY prompt
by Harald Welte
· 14 years ago
4a8f22e
OM2000: Add IS Conf Req
by Harald Welte
· 14 years ago
6d5a039
OM2000: Add enable/disable commands
by Harald Welte
· 14 years ago
091ae8f
OM2000: Fix Negotiation parsing
by Harald Welte
· 14 years ago
5f49656
OM2000: Implement proper parsing and response for Negotiation
by Harald Welte
· 14 years ago
40ad3b3
OM2000: Add support for sending the TEST REQUEST message
by Harald Welte
· 14 years ago
fe59e07
OML2000: Make sure we can properly exit the VTY node
by Harald Welte
· 14 years ago
422a781
OM2000: Make sure we can properly exit tye VTY node
by Harald Welte
· 14 years ago
9bf8e9e
OM2000: Add VTY commands for connect/disconnect and op_info
by Harald Welte
· 14 years ago
fc61a3f
OM2000: Add missing file from previous commit
by Harald Welte
· 14 years ago
1d5a206
OM2000: Introduce VTY commands to initiate OM2000 procedures
by Harald Welte
· 14 years ago
4f3644b
OM2000: Negotiation Resposne, send START on OML-up event
by Harald Welte
· 14 years ago
8f909d5
OM2000: Fix computation of length field in header, direct transmit of msgs
by Harald Welte
· 14 years ago
2a0a963
[RBS2000] Add initial code for Ericsson OM2000 O&M protocol
by Harald Welte
· 14 years ago
89e466e
[RBS2000] Add FIXMEs in code that is a crude hack
by Harald Welte
· 14 years ago
f1e466a
[RBS2000] Actually activate the RBS2000 support
by Harald Welte
· 14 years ago
c2f27ba
[RBS2000] Initial attempt at Ericsson RBS2000 support
by Harald Welte
· 14 years ago
9480980
[OML] Allow each BTS model to specify the OML callback
by Harald Welte
· 14 years ago
59c51e7
DAHDI: print debug hexdump of every signalling msg we send
by Harald Welte
· 14 years ago
0a47400
[LAPD] Add minimal support for TE-side LAPD
by Harald Welte
· 14 years ago
fccc25c
DAHDI: Register every FD in the select() exceptfd-set
by Harald Welte
· 14 years ago
a6ef1b2
DAHDI: Handle exceptions
by Harald Welte
· 14 years ago
81c51a8
E1 INPUT: Fix PCAP file generation for non-mISDN case
by Harald Welte
· 14 years ago
18e489a
E1 Input: Add new S_INP_LINE_INIT signal
by Harald Welte
· 14 years ago
4c826f7
[BSC] Move the BTS-type specific code from bcs_init.c to bts_*.c
by Harald Welte
· 14 years ago
279d752
[gb_proxy] vty: display the BVC BLOCKED status in 'show gbproxy'
by Harald Welte
· 14 years ago
7b7eaa9
[gb_proxy] make sure bssgp cell id is copied correctly
by Harald Welte
· 14 years ago
4127072
[gb proxy] treat BVCI=1 consistently like signalling
by Harald Welte
· 14 years ago
db2a2d5
[gb_proxy] Convert a NS-BLOCK from BSS into BVC-RESET to SGSN
by Harald Welte
· 14 years ago
51b7d40
[gb_proxy] Track the state of blocked/unblocked BVC in the proxy
by Harald Welte
· 14 years ago
e08e9e5
remove dead code
by Harald Welte
· 14 years ago
075b562
[DAHDI] cosmetic fixes
by Harald Welte
· 14 years ago
cbaa38a
[DAHDI] make sure LAPD transmits with correct SAPI
by Harald Welte
· 14 years ago
32a7434
[LAPD] fix bug in TEI manager rendering LAPD unusable
by Harald Welte
· 14 years ago
c08f3b1
[DAHDI] remove unused variable
by Harald Welte
· 14 years ago
306a206
[LAPD] Support multiple instances of LAPD
by Harald Welte
· 14 years ago
a91e1c8
[LAPD] remove a number of unneeded assert() calls
by Harald Welte
· 14 years ago
9be5403
[LAPD] further code cleanup
by Harald Welte
· 14 years ago
1b2494d
[LAPD] use LOGP/DEBUGP instead of custom logging function
by Harald Welte
· 14 years ago
348ffa8
[DAHDI] update to latest e1_input changes
by Harald Welte
· 14 years ago
c7841cc
[DAHDI] build dahdi driver only if dahdi header is present
by Harald Welte
· 14 years ago
890fe4a
[DAHDI] integrate DAHDI driver into E1 Input layer
by Harald Welte
· 14 years ago
6aef70d
[dahdi] remove lots of dead code and references to mISDN
by Harald Welte
· 14 years ago
bdc1118
[dahdi] don't export private functions from lapd.c
by Harald Welte
· 14 years ago
6803ab2
[dahdi] support multiple-include of lapd.h
by Harald Welte
· 14 years ago
98d0103
[dahdi] Fix LAPD code comments (C-style)
by Harald Welte
· 14 years ago
8c911f8
[dahdi] Fix lapd.c coding style
by Harald Welte
· 14 years ago
52b0e02
Working audio data version
by creslin287
· 14 years ago
eb3459e
Current LAPD with fixes for frames with P/F bit set
by Matthew Fredrickson
· 14 years ago
8f58bbe
Current version of mostly working dahdi driver
by Matthew Fredrickson
· 14 years ago
73448bf
Latest version of driver from other machine.
by Matthew Fredrickson
· 15 years ago
ab27bdd
Add addtional copyright notices for changes
by Matthew Fredrickson
· 15 years ago
124c80e
Add lapd.c and lapd.h
by Matthew Fredrickson
· 15 years ago
7a9f985
Add dahdi.c
by Matthew Fredrickson
· 15 years ago
Next »