bts: Allow config of RACH control parameters tx-integer & max retrans
Tweaking theses can be useful especially tx-integer that influence
both the spread of rach attemps and the delay between two attemps.
Looking up GSM 04.08 3.3.1.1.2 & 10.5.2.29 can help determine good
values. The default are choosed with a wide spacing between attemps
(tx integer = 9 -> T=12 & S=217 (non-combined CCCH/SDCCH) or 115 (for
combined CCCH/SDCCH)). This alleviates the problem of responding to
several RACH attempts by a same MS, allocating several RF channels when
only 1 is needed.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
diff --git a/openbsc/src/vty_interface.c b/openbsc/src/vty_interface.c
index 077e1d0..808db3f 100644
--- a/openbsc/src/vty_interface.c
+++ b/openbsc/src/vty_interface.c
@@ -168,6 +168,11 @@
VTY_NEWLINE);
vty_out(vty, "Cell Reselection Hysteresis: %u dBm%s",
bts->si_common.cell_sel_par.cell_resel_hyst*2, VTY_NEWLINE);
+ vty_out(vty, "RACH TX-Integer: %u%s", bts->si_common.rach_control.tx_integer,
+ VTY_NEWLINE);
+ vty_out(vty, "RACH Max transmissions: %u%s",
+ rach_max_trans_raw2val(bts->si_common.rach_control.max_trans),
+ VTY_NEWLINE);
if (bts->si_common.rach_control.cell_bar)
vty_out(vty, " CELL IS BARRED%s", VTY_NEWLINE);
if (is_ipaccess_bts(bts))
@@ -290,6 +295,11 @@
vty_out(vty, " channel allocator %s%s",
bts->chan_alloc_reverse ? "descending" : "ascending",
VTY_NEWLINE);
+ vty_out(vty, " rach tx integer %u%s",
+ bts->si_common.rach_control.tx_integer, VTY_NEWLINE);
+ vty_out(vty, " rach max transmission %u%s",
+ rach_max_trans_raw2val(bts->si_common.rach_control.max_trans),
+ VTY_NEWLINE);
if (bts->si_common.rach_control.cell_bar)
vty_out(vty, " cell barred 1%s", VTY_NEWLINE);
if (is_ipaccess_bts(bts)) {
@@ -1263,6 +1273,26 @@
return CMD_SUCCESS;
}
+DEFUN(cfg_bts_rach_tx_integer,
+ cfg_bts_rach_tx_integer_cmd,
+ "rach tx integer <0-15>",
+ "Set the raw tx integer value in RACH Control parameters IE")
+{
+ struct gsm_bts *bts = vty->index;
+ bts->si_common.rach_control.tx_integer = atoi(argv[0]) & 0xf;
+ return CMD_SUCCESS;
+}
+
+DEFUN(cfg_bts_rach_max_trans,
+ cfg_bts_rach_max_trans_cmd,
+ "rach max transmission (1|2|4|7)",
+ "Set the maximum number of RACH burst transmissions")
+{
+ struct gsm_bts *bts = vty->index;
+ bts->si_common.rach_control.max_trans = rach_max_trans_val2raw(atoi(argv[0]));
+ return CMD_SUCCESS;
+}
+
DEFUN(cfg_bts_cell_barred, cfg_bts_cell_barred_cmd,
"cell barred (0|1)",
"Should this cell be barred from access?")
@@ -1550,6 +1580,8 @@
install_element(BTS_NODE, &cfg_bts_oml_e1_cmd);
install_element(BTS_NODE, &cfg_bts_oml_e1_tei_cmd);
install_element(BTS_NODE, &cfg_bts_challoc_cmd);
+ install_element(BTS_NODE, &cfg_bts_rach_tx_integer_cmd);
+ install_element(BTS_NODE, &cfg_bts_rach_max_trans_cmd);
install_element(BTS_NODE, &cfg_bts_cell_barred_cmd);
install_element(BTS_NODE, &cfg_bts_ms_max_power_cmd);
install_element(BTS_NODE, &cfg_bts_per_loc_upd_cmd);