tests: Introduce vty-transcript-test tests
Add a few commands to make sure it's working fine, and print all
available timers with default values.
Change-Id: Ifd092b9561d49be1f62769d95ba49f6e4aeb4066
diff --git a/tests/test_nodes.vty b/tests/test_nodes.vty
new file mode 100644
index 0000000..630094f
--- /dev/null
+++ b/tests/test_nodes.vty
@@ -0,0 +1,61 @@
+OsmoSGSN> enable
+OsmoSGSN# show timer
+T3312 = 600 s Periodic RA Update timer (s) (default: 600 s)
+T3313 = 30 s Waiting for paging response timer (s) (default: 30 s)
+T3314 = 44 s Force to STANDBY on expiry timer (s) (default: 44 s)
+T3316 = 44 s AA-Ready timer (s) (default: 44 s)
+T3322 = 6 s Detach request -> accept timer (s) (default: 6 s)
+T3350 = 6 s Waiting for ATT/RAU/TMSI_COMPL timer (s) (default: 6 s)
+T3360 = 6 s Waiting for AUTH/CIPH response timer (s) (default: 6 s)
+T3370 = 6 s Waiting for IDENTITY response timer (s) (default: 6 s)
+T3385 = 8 s Wait for ACT PDP CTX REQ timer (s) (default: 8 s)
+T3386 = 8 s Wait for MODIFY PDP CTX ACK timer (s) (default: 8 s)
+T3395 = 8 s Wait for DEACT PDP CTX ACK timer (s) (default: 8 s)
+T3397 = 8 s Wait for DEACT AA PDP CTX ACK timer (s) (default: 8 s)
+OsmoSGSN# configure terminal
+OsmoSGSN(config)# list
+...
+ sgsn
+ ctrl
+...
+ ns
+ bssgp
+...
+
+OsmoSGSN(config)# sgsn
+OsmoSGSN(config-sgsn)# list
+...
+ gtp local-ip A.B.C.D
+ ggsn <0-255> remote-ip A.B.C.D
+ ggsn <0-255> gtp-version (0|1)
+ ggsn <0-255> echo-interval <1-36000>
+ ggsn <0-255> no echo-interval
+ imsi-acl (add|del) IMSI
+ auth-policy (accept-all|closed|acl-only|remote)
+ authentication (optional|required)
+ encryption (GEA0|GEA1|GEA2|GEA3|GEA4)
+ gsup ipa-name NAME
+ gsup remote-ip A.B.C.D
+ gsup remote-port <0-65535>
+ gsup oap-id <0-65535>
+ gsup oap-k K
+ gsup oap-opc OPC
+ apn APNAME ggsn <0-255>
+ apn APNAME imsi-prefix IMSIPRE ggsn <0-255>
+ access-point-name NAME
+ no access-point-name NAME
+ cdr filename NAME
+ no cdr filename
+ cdr trap
+ no cdr trap
+ cdr interval <1-2147483647>
+ ggsn dynamic
+ grx-dns-add A.B.C.D
+ timer [TNNNN] [(<0-2147483647>|default)]
+ no compression rfc1144
+ compression rfc1144 active slots <1-256>
+ compression rfc1144 passive
+ no compression v42bis
+ compression v42bis active direction (ms|sgsn|both) codewords <512-65535> strlen <6-250>
+ compression v42bis passive
+...