sgsn: Integrate the GSUP client into the SGSN
This commit adds GSUP client configuration (via VTY), connection set
up, and real message sending.
The following configuration commands are added:
- gsup remote-ip A.B.C.D set server IP address
- gsup remote-port PORT set server TCP port
Ticket: OW#1338
Sponsored-by: On-Waves ehf
diff --git a/openbsc/src/gprs/gprs_subscriber.c b/openbsc/src/gprs/gprs_subscriber.c
index 461b3a5..04debff 100644
--- a/openbsc/src/gprs/gprs_subscriber.c
+++ b/openbsc/src/gprs/gprs_subscriber.c
@@ -20,6 +20,7 @@
*/
#include <openbsc/gsm_subscriber.h>
+#include <openbsc/gprs_gsup_client.h>
#include <openbsc/sgsn.h>
#include <openbsc/gprs_sgsn.h>
@@ -28,10 +29,47 @@
#include <openbsc/debug.h>
+#include <netinet/in.h>
+#include <arpa/inet.h>
+
extern void *tall_bsc_ctx;
-void gprs_subscr_init(struct sgsn_instance *sgi)
+static int gsup_read_cb(struct gprs_gsup_client *gsupc, struct msgb *msg);
+
+/* TODO: Some functions are specific to the SGSN, but this file is more general
+ * (it has gprs_* name). Either move these functions elsewhere, split them and
+ * move a part, or replace the gprs_ prefix by sgsn_. The applies to
+ * gprs_subscr_init, gsup_read_cb, and gprs_subscr_tx_gsup_message.
+ */
+
+int gprs_subscr_init(struct sgsn_instance *sgi)
{
+ const char *addr_str;
+
+ if (!sgi->cfg.gsup_server_addr.sin_addr.s_addr)
+ return 0;
+
+ addr_str = inet_ntoa(sgi->cfg.gsup_server_addr.sin_addr);
+
+ sgi->gsup_client = gprs_gsup_client_create(
+ addr_str, sgi->cfg.gsup_server_port,
+ &gsup_read_cb);
+
+ if (!sgi->gsup_client)
+ return -1;
+
+ return 1;
+}
+
+static int gsup_read_cb(struct gprs_gsup_client *gsupc, struct msgb *msg)
+{
+ int rc;
+
+ rc = gprs_subscr_rx_gsup_message(msg);
+ if (rc < 0)
+ return -1;
+
+ return rc;
}
static struct sgsn_subscriber_data *sgsn_subscriber_data_alloc(void *ctx)
@@ -96,17 +134,21 @@
static int gprs_subscr_tx_gsup_message(struct gsm_subscriber *subscr,
struct gprs_gsup_message *gsup_msg)
{
- struct msgb *msg = msgb_alloc(4096, __func__);
+ struct msgb *msg = gprs_gsup_msgb_alloc();
strncpy(gsup_msg->imsi, subscr->imsi, sizeof(gsup_msg->imsi) - 1);
gprs_gsup_encode(msg, gsup_msg);
LOGMMCTXP(LOGL_INFO, subscr->sgsn_data->mm,
- "Sending GSUP NYI, would send: %s\n", msgb_hexdump(msg));
- msgb_free(msg);
+ "Sending GSUP, will send: %s\n", msgb_hexdump(msg));
- return -ENOTSUP;
+ if (!sgsn->gsup_client) {
+ msgb_free(msg);
+ return -ENOTSUP;
+ }
+
+ return gprs_gsup_client_send(sgsn->gsup_client, msg);
}
static int gprs_subscr_handle_gsup_auth_res(struct gsm_subscriber *subscr,
diff --git a/openbsc/src/gprs/sgsn_main.c b/openbsc/src/gprs/sgsn_main.c
index 141eacf..f26b812 100644
--- a/openbsc/src/gprs/sgsn_main.c
+++ b/openbsc/src/gprs/sgsn_main.c
@@ -357,6 +357,12 @@
exit(2);
}
+ rc = gprs_subscr_init(&sgsn_inst);
+ if (rc < 0) {
+ LOGP(DGPRS, LOGL_FATAL, "Cannot set up subscriber management\n");
+ exit(2);
+ }
+
rc = gprs_ns_nsip_listen(sgsn_nsi);
if (rc < 0) {
LOGP(DGPRS, LOGL_FATAL, "Cannot bind/listen on NSIP socket\n");
diff --git a/openbsc/src/gprs/sgsn_vty.c b/openbsc/src/gprs/sgsn_vty.c
index b15de75..e9333f5 100644
--- a/openbsc/src/gprs/sgsn_vty.c
+++ b/openbsc/src/gprs/sgsn_vty.c
@@ -139,6 +139,12 @@
vty_out(vty, " auth-policy %s%s",
get_value_string(sgsn_auth_pol_strs, g_cfg->auth_policy),
VTY_NEWLINE);
+ if (g_cfg->gsup_server_addr.sin_addr.s_addr)
+ vty_out(vty, " gsup remote-ip %s%s",
+ inet_ntoa(g_cfg->gsup_server_addr.sin_addr), VTY_NEWLINE);
+ if (g_cfg->gsup_server_port)
+ vty_out(vty, " gsup remote-port %d%s",
+ g_cfg->gsup_server_port, VTY_NEWLINE);
llist_for_each_entry(acl, &g_cfg->imsi_acl, list)
vty_out(vty, " imsi-acl add %s%s", acl->imsi, VTY_NEWLINE);
@@ -650,6 +656,29 @@
return CMD_SUCCESS;
}
+DEFUN(cfg_gsup_remote_ip, cfg_gsup_remote_ip_cmd,
+ "gsup remote-ip A.B.C.D",
+ "GSUP Parameters\n"
+ "Set the IP address of the remote GSUP server\n"
+ "IPv4 Address\n")
+{
+ inet_aton(argv[0], &g_cfg->gsup_server_addr.sin_addr);
+
+ return CMD_SUCCESS;
+}
+
+DEFUN(cfg_gsup_remote_port, cfg_gsup_remote_port_cmd,
+ "gsup remote-port <0-65535>",
+ "GSUP Parameters\n"
+ "Set the TCP port of the remote GSUP server\n"
+ "Remote TCP port\n")
+{
+ g_cfg->gsup_server_port = atoi(argv[0]);
+
+ return CMD_SUCCESS;
+}
+
+
int sgsn_vty_init(void)
{
@@ -676,6 +705,8 @@
install_element(SGSN_NODE, &cfg_ggsn_gtp_version_cmd);
install_element(SGSN_NODE, &cfg_imsi_acl_cmd);
install_element(SGSN_NODE, &cfg_auth_policy_cmd);
+ install_element(SGSN_NODE, &cfg_gsup_remote_ip_cmd);
+ install_element(SGSN_NODE, &cfg_gsup_remote_port_cmd);
return 0;
}