Allow setting of Control Channel Description parameters via VTY
diff --git a/openbsc/src/libbsc/bsc_init.c b/openbsc/src/libbsc/bsc_init.c
index 2533aa7..f5d7969 100644
--- a/openbsc/src/libbsc/bsc_init.c
+++ b/openbsc/src/libbsc/bsc_init.c
@@ -421,10 +421,7 @@
"GSM networks and should only be used in a RF "
"shielded environment such as a faraday cage!\n\n");
- /* Control Channel Description */
- bts->si_common.chan_desc.att = 1;
- bts->si_common.chan_desc.bs_pa_mfrms = RSL_BS_PA_MFRMS_5;
- bts->si_common.chan_desc.bs_ag_blks_res = 1;
+ /* Control Channel Description is set from vty/config */
/* T3212 is set from vty/config */
@@ -435,6 +432,9 @@
switch (n) {
case 0:
bts->si_common.chan_desc.ccch_conf = RSL_BCCH_CCCH_CONF_1_C;
+ /* Limit reserved block to 2 on combined channel */
+ if (bts->si_common.chan_desc.bs_ag_blks_res > 2)
+ bts->si_common.chan_desc.bs_ag_blks_res = 2;
break;
case 1:
bts->si_common.chan_desc.ccch_conf = RSL_BCCH_CCCH_CONF_1_NC;
diff --git a/openbsc/src/libbsc/bsc_vty.c b/openbsc/src/libbsc/bsc_vty.c
index b91304d..61b0911 100644
--- a/openbsc/src/libbsc/bsc_vty.c
+++ b/openbsc/src/libbsc/bsc_vty.c
@@ -256,6 +256,12 @@
VTY_NEWLINE);
if (bts->si_common.rach_control.cell_bar)
vty_out(vty, " CELL IS BARRED%s", VTY_NEWLINE);
+ vty_out(vty, "Channel Description Attachment: %s%s",
+ (bts->si_common.chan_desc.att) ? "yes" : "no", VTY_NEWLINE);
+ vty_out(vty, "Channel Description BS-PA-MFRMS: %u%s",
+ bts->si_common.chan_desc.bs_pa_mfrms + 2, VTY_NEWLINE);
+ vty_out(vty, "Channel Description BS-AG_BLKS-RES: %u%s",
+ bts->si_common.chan_desc.bs_ag_blks_res, VTY_NEWLINE);
vty_out(vty, "System Information present: 0x%08x, static: 0x%08x%s",
bts->si_valid, bts->si_mode_static, VTY_NEWLINE);
if (is_ipaccess_bts(bts))
@@ -496,6 +502,13 @@
rach_max_trans_raw2val(bts->si_common.rach_control.max_trans),
VTY_NEWLINE);
+ vty_out(vty, " channel-descrption attach %u%s",
+ bts->si_common.chan_desc.att, VTY_NEWLINE);
+ vty_out(vty, " channel-descrption bs-pa-mfrms %u%s",
+ bts->si_common.chan_desc.bs_pa_mfrms + 2, VTY_NEWLINE);
+ vty_out(vty, " channel-descrption bs-ag-blks-res %u%s",
+ bts->si_common.chan_desc.bs_ag_blks_res, VTY_NEWLINE);
+
if (bts->rach_b_thresh != -1)
vty_out(vty, " rach nm busy threshold %u%s",
bts->rach_b_thresh, VTY_NEWLINE);
@@ -1770,6 +1783,49 @@
return CMD_SUCCESS;
}
+#define CD_STR "Channel Description\n"
+
+DEFUN(cfg_bts_chan_desc_att,
+ cfg_bts_chan_desc_att_cmd,
+ "channel-descrption attach (0|1)",
+ CD_STR
+ "Set if attachment is required\n"
+ "Attachment is NOT required\n"
+ "Attachment is required (standard)\n")
+{
+ struct gsm_bts *bts = vty->index;
+ bts->si_common.chan_desc.att = atoi(argv[0]);
+ return CMD_SUCCESS;
+}
+
+DEFUN(cfg_bts_chan_desc_bs_pa_mfrms,
+ cfg_bts_chan_desc_bs_pa_mfrms_cmd,
+ "channel-descrption bs-pa-mfrms <2-9>",
+ CD_STR
+ "Set number of multiframe periods for paging groups\n"
+ "Number of multiframe periods for paging groups\n")
+{
+ struct gsm_bts *bts = vty->index;
+ int bs_pa_mfrms = atoi(argv[0]);
+
+ bts->si_common.chan_desc.bs_pa_mfrms = bs_pa_mfrms - 2;
+ return CMD_SUCCESS;
+}
+
+DEFUN(cfg_bts_chan_desc_bs_ag_blks_res,
+ cfg_bts_chan_desc_bs_ag_blks_res_cmd,
+ "channel-descrption bs-ag-blks-res <0-7>",
+ CD_STR
+ "Set number of blocks reserved for access grant\n"
+ "Number of blocks reserved for access grant\n")
+{
+ struct gsm_bts *bts = vty->index;
+ int bs_ag_blks_res = atoi(argv[0]);
+
+ bts->si_common.chan_desc.bs_ag_blks_res = bs_ag_blks_res;
+ return CMD_SUCCESS;
+}
+
#define NM_STR "Network Management\n"
DEFUN(cfg_bts_rach_nm_b_thresh,
@@ -2942,6 +2998,9 @@
install_element(BTS_NODE, &cfg_bts_challoc_cmd);
install_element(BTS_NODE, &cfg_bts_rach_tx_integer_cmd);
install_element(BTS_NODE, &cfg_bts_rach_max_trans_cmd);
+ install_element(BTS_NODE, &cfg_bts_chan_desc_att_cmd);
+ install_element(BTS_NODE, &cfg_bts_chan_desc_bs_pa_mfrms_cmd);
+ install_element(BTS_NODE, &cfg_bts_chan_desc_bs_ag_blks_res_cmd);
install_element(BTS_NODE, &cfg_bts_rach_nm_b_thresh_cmd);
install_element(BTS_NODE, &cfg_bts_rach_nm_ldavg_cmd);
install_element(BTS_NODE, &cfg_bts_cell_barred_cmd);