| commit | e31497589adfc9e219e2aa4ee40c24a8ff4f2f05 | [log] [tgz] |
|---|---|---|
| author | Harald Welte <laforge@osmocom.org> | Wed Oct 21 17:58:48 2020 +0200 |
| committer | Harald Welte <laforge@osmocom.org> | Wed Oct 21 18:55:24 2020 +0200 |
| tree | 66fe2f35b2f53bbb17ac3bccfd7eddc423ecdc1e | |
| parent | 40dc1b646b1d294046e3512b5840cfae8842ccc2 [diff] |
e1-tracer faceplates: Reduce RJ45 cut-out by 0.8mm in height and 0.5mm in width Tests with prototypes have shown that above the RJ45 jack, there is a 0.95mm gap, and towards both sides there's a total of 0.7mm. Let's reduce that to 0.15mm on top and 0.10mm on either side. Change-Id: I13b097a76cd9ce96a64ed6fec956d7c918c613f9