diff --git a/hardware/gerber/e1-tracer.gpi b/hardware/gerber/e1-tracer.gpi
new file mode 100644
index 0000000..570ccad
--- /dev/null
+++ b/hardware/gerber/e1-tracer.gpi
@@ -0,0 +1,70 @@
+Generated by EAGLE CAM Processor 7.7.0
+
+Photoplotter Info File: /space/home/laforge/projects/git/osmo-e1-xcvr/hardware/eagle/gerber/e1-tracer.gpi
+
+ Date              : 30.08.20 17:46
+ Plotfile          : /space/home/laforge/projects/git/osmo-e1-xcvr/hardware/eagle/gerber/e1-tracer.gtl
+ Apertures         : generated: 
+ Device            : Gerber RS-274-X photoplotter, coordinate format 2.5 inch
+
+Parameter settings:
+
+ Emulate Apertures : no
+ Tolerance Draw  + :  0.00 %
+ Tolerance Draw  - :  0.00 %
+ Tolerance Flash + :  0.00 %
+ Tolerance Flash - :  0.00 %
+ Rotate            : no
+ Mirror            : no
+ Optimize          : yes
+ Auto fit          : yes
+ OffsetX           : 0inch
+ OffsetY           : 0inch
+
+Plotfile Info:
+
+ Coordinate Format : 2.5
+ Coordinate Units  : Inch
+ Data Mode         : Absolute
+ Zero Suppression  : None
+ End Of Block      : *
+
+Apertures used:
+
+ Code     Shape     Size                  used
+
+ D10      draw      0.0000inch              16
+ D11      draw      0.0100inch             225
+ D12      draw      0.0110inch              79
+ D13      draw      0.0094inch             152
+ D14      draw      0.0080inch              59
+ D15      draw      0.0189inch              12
+ D16      draw      0.0118inch              21
+ D17      draw      0.0136inch               4
+ D18      round     0.0525inch              16
+ D19      draw      0.0142inch              12
+ D20      draw      0.0197inch              12
+ D21      round     0.0472inch               4
+ D22      draw      0.0125inch              32
+ D23      draw      0.0600inch               1
+ D24      draw      0.0081inch              93
+ D25      draw      0.0354inch               8
+ D26      draw      0.0156inch               4
+ D27      square    0.0740inch               1
+ D28      round     0.0740inch               7
+ D29      draw      0.0295inch               6
+ D30      draw      0.0106inch               2
+ D31      draw      0.0089inch               2
+ D32      draw      0.0161inch               3
+ D33      draw      0.0108inch               5
+ D34      draw      0.0020inch             318
+ D35      draw      0.0160inch            7295
+ D36      round     0.0238inch             146
+ D37      draw      0.0320inch              31
+ D38      draw      0.0240inch              69
+ D39      draw      0.0120inch             216
+ D40      draw      0.0157inch              38
+ D41      draw      0.0236inch               7
+ D42      round     0.0240inch               7
+ D43      round     0.2165inch               4
+