add freeswitch
Change-Id: If948de9e9e7e288b0a031ab973f453cd91a9e99b
diff --git a/net/templates/freeswitch/conf/autoload_configs/switch.conf.xml b/net/templates/freeswitch/conf/autoload_configs/switch.conf.xml
new file mode 100644
index 0000000..70502cd
--- /dev/null
+++ b/net/templates/freeswitch/conf/autoload_configs/switch.conf.xml
@@ -0,0 +1,162 @@
+<configuration name="switch.conf" description="Core Configuration">
+
+ <cli-keybindings>
+ <key name="1" value="help"/>
+ <key name="2" value="status"/>
+ <key name="3" value="show channels"/>
+ <key name="4" value="show calls"/>
+ <key name="5" value="sofia status"/>
+ <key name="6" value="reloadxml"/>
+ <key name="7" value="console loglevel 0"/>
+ <key name="8" value="console loglevel 7"/>
+ <key name="9" value="sofia status profile internal"/>
+ <key name="10" value="sofia profile internal siptrace on"/>
+ <key name="11" value="sofia profile internal siptrace off"/>
+ <key name="12" value="version"/>
+ </cli-keybindings>
+
+ <default-ptimes>
+ <!-- Set this to override the 20ms assumption of various codecs in the sdp with no ptime defined -->
+ <!-- <codec name="G729" ptime="40"/> -->
+ </default-ptimes>
+
+ <settings>
+ <!-- Colorize the Console -->
+ <param name="colorize-console" value="true"/>
+
+ <!-- Run the timer at 20ms by default and drop down as needed unless you set 1m-timer=true which was previous default -->
+ <!-- <param name="1ms-timer" value="true"/> -->
+
+ <!--
+ Set the Switch Name for HA environments.
+ When setting the switch name, it will override the system hostname for all DB and CURL requests
+ allowing cluster environments such as RHCS to have identical FreeSWITCH configurations but run
+ as different hostnames.
+ -->
+ <!-- <param name="switchname" value="freeswitch"/> -->
+
+ <!-- Maximum number of simultaneous DB handles open -->
+ <param name="max-db-handles" value="50"/>
+ <!-- Maximum number of seconds to wait for a new DB handle before failing -->
+ <param name="db-handle-timeout" value="10"/>
+
+ <!-- Minimum idle CPU before refusing calls -->
+ <!-- <param name="min-idle-cpu" value="25"/> -->
+
+ <!--
+ Max number of sessions to allow at any given time.
+
+ NOTICE: If you're driving 28 T1's in a single box you should set this to 644*2 or 1288
+ this will ensure you're able to use the entire DS3 without a problem. Otherwise you'll
+ be 144 channels short of always filling that DS3 up which can translate into waste.
+ -->
+ <param name="max-sessions" value="1000"/>
+ <!--Most channels to create per second -->
+ <param name="sessions-per-second" value="30"/>
+ <!-- Default Global Log Level - value is one of debug,info,notice,warning,err,crit,alert -->
+ <param name="loglevel" value="info"/>
+
+ <!-- Set the core DEBUG level (0-10) -->
+ <!-- <param name="debug-level" value="10"/> -->
+
+ <!-- SQL Buffer length within rage of 32k to 10m -->
+ <!-- <param name="sql-buffer-len" value="1m"/> -->
+ <!-- Maximum SQL Buffer length must be greater than sql-buffer-len -->
+ <!-- <param name="max-sql-buffer-len" value="2m"/> -->
+
+ <!--
+ The min-dtmf-duration specifies the minimum DTMF duration to use on
+ outgoing events. Events shorter than this will be increased in duration
+ to match min_dtmf_duration. You cannot configure a dtmf duration on a
+ profile that is less than this setting. You may increase this value,
+ but cannot set it lower than 400. This value cannot exceed
+ max-dtmf-duration. -->
+ <!-- <param name="min-dtmf-duration" value="400"/> -->
+
+ <!--
+ The max-dtmf-duration caps the playout of a DTMF event at the specified
+ duration. Events exceeding this duration will be truncated to this
+ duration. You cannot configure a duration on a profile that exceeds
+ this setting. This setting can be lowered, but cannot exceed 192000.
+ This setting cannot be set lower than min_dtmf_duration. -->
+ <!-- <param name="max-dtmf-duration" value="192000"/> -->
+
+ <!--
+ The default_dtmf_duration specifies the DTMF duration to use on
+ originated DTMF events or on events that are received without a
+ duration specified. This value can be increased or lowered. This
+ value is lower-bounded by min_dtmf_duration and upper-bounded by
+ max-dtmf-duration\. -->
+ <!-- <param name="default-dtmf-duration" value="2000"/> -->
+
+ <!--
+ If you want to send out voicemail notifications via Windows you'll need to change the mailer-app
+ variable to the setting below:
+
+ <param name="mailer-app" value="msmtp"/>
+
+ Do not change mailer-app-args.
+ You will also need to download a sendmail clone for Windows (msmtp). This version works without issue:
+ http://msmtp.sourceforge.net/index.html. Download and copy the .exe to %winddir%\system32.
+ You'll need to create a small config file for smtp credentials (host name, authentication, tls, etc.) in
+ %USERPROFILE%\Application Data\ called "msmtprc.txt". Below is a sample copy of this file:
+
+ ###################################
+ # The SMTP server of the provider.
+ account provider
+ host smtp.myisp.com
+ from john@myisp.com
+ auth login
+ user johndoe
+ password mypassword
+
+ # Set a default account
+ account default : provider
+ ###################################
+
+ -->
+
+ <param name="mailer-app" value="sendmail"/>
+ <param name="mailer-app-args" value="-t"/>
+ <param name="dump-cores" value="yes"/>
+
+ <!-- Enable verbose channel events to include every detail about a channel on every event -->
+ <!-- <param name="verbose-channel-events" value="no"/> -->
+
+ <!-- Enable clock nanosleep -->
+ <!-- <param name="enable-clock-nanosleep" value="true"/> -->
+
+ <!-- Enable monotonic timing -->
+ <!-- <param name="enable-monotonic-timing" value="true"/> -->
+
+ <!-- NEEDS DOCUMENTATION -->
+ <!-- <param name="enable-softtimer-timerfd" value="true"/> -->
+ <!-- <param name="enable-cond-yield" value="true"/> -->
+ <!-- <param name="enable-timer-matrix" value="true"/> -->
+ <!-- <param name="threaded-system-exec" value="true"/> -->
+ <!-- <param name="tipping-point" value="0"/> -->
+ <!-- <param name="timer-affinity" value="disabled"/> -->
+ <!-- NEEDS DOCUMENTATION -->
+
+ <!-- RTP port range -->
+ <param name="rtp-start-port" value="16384"/>
+ <param name="rtp-end-port" value="16484"/>
+
+ <param name="rtp-enable-zrtp" value="false"/>
+
+ <!-- <param name="core-db-dsn" value="pgsql://hostaddr=127.0.0.1 dbname=freeswitch user=freeswitch password='' options='-c client_min_messages=NOTICE' application_name='freeswitch'" /> -->
+ <!-- <param name="core-db-dsn" value="dsn:username:password" /> -->
+ <!-- The system will create all the db schemas automatically, set this to false to avoid this behaviour -->
+ <!-- <param name="auto-create-schemas" value="true"/> -->
+ <!-- <param name="auto-clear-sql" value="true"/> -->
+ <!-- <param name="enable-early-hangup" value="true"/> -->
+
+ <!-- <param name="core-dbtype" value="MSSQL"/> -->
+
+ <!-- Allow multiple registrations to the same account in the central registration table -->
+ <!-- <param name="multiple-registrations" value="true"/> -->
+
+ </settings>
+
+</configuration>
+