=== WHAT IS THIS?

* quickly configure, launch and tear down an entire Osmocom core network on
  your box (see net/README).

This is the set of tools I wrote for myself and use every day to run and test
the Osmocom core network. I hope this helps, and I would appreciate
contributions of any improvements you may have!


=== Quick Start

cp config_2g3g config_mine
$EDITOR config_mine
# update IP addresses and device names as required

mkdir my_network
cd my_network
../fill_config.py ../config_mine ../tmpl_std

./run.sh
# Launches numerous x-terminals with one component running in each.
# Logs and pcap traces are being taken automatically.

# hit enter in the original first terminal to tear down all programs.
# Enter a name to save logs, otherwise all logging will be stored
# under autolog/<timestamp>

Then possibly modify the config and refresh:

# tweak config?
$EDITOR ../config_mine
../fill_config.py
# picks up same ../config_mine and ../tmpl_std from last time

# own templates?
cp -r ../tmpl_std ../tmpl_mine
$EDITOR ../tmpl_mine/*
../fill_config.py ../tmpl_mine
# picks up same ../config_mine from last time, and ../tmpl_mine from cmdline


If you wanted to change to dynamic timeslots, you can:

cd ..
mkdir tmpl_dyn
cd tmpl_dyn
ln -s ../tmpl_std/* .
rm ./osmo-bsc.cfg
cp ../tmpl_std/osmo-bsc.cfg .
sed -i 's#TCH/F#TCH/F_TCH/H_PDCH#' osmo-bsc.cfg

cd ../my_network
../fill_config.py ../tmpl_dyn


If you moved your laptop to a different location, you can:

cp ../config_mine ../config_foo
$EDITOR ../config_foo  # set new IP address(es)
../fill_config.py ../config_foo


=== Config file templates

A *directory* contains template files that are filled with specific values by the
fill_config.py script. See e.g. tmpl_std/.

A *file* contains local config items as name=val pairs that are put into the
templates. See e.g. config_2g3g.

The fill_config.py script helps to fill the templates with the config values. Simply
invoke fill_config.py with a dir argument (templates dir) and a file argument (specific
config values). The dir argument can be used in the templates with ${NET_DIR},
temporary files (sockets etc.) should be placed inside this folder.

If one or both are omitted, the script tries to re-use the most recent paths,
they were stored in local files '.last_config' and '.last_templates'.

The result is a complete set of .cfg files that match your local machine and
network config.


=== Launch

A run.sh script template (tmpl_std/run.sh) also gets filled with specifics and
placed next to the .cfg files.

run.sh uses sudo to start tcpdump, configure ip forwarding and masquerading
(for the GGSN's APN tunnel required for data services).

When you launch run.sh, many xterms are launched, and when hitting enter, all
of them get destroyed again. This is obviously intended to be run on your
desktop computer or laptop, not on a remote box. It may also make sense to
launch all of them in the current shell, and maybe or maybe not switch off
stderr logging; or to launch each component in a tmux window or whatnot -- if
you figure out something in that line, I would be glad to get contributions and
incorporate that.


=== Logging and pcaps

The run.sh script automatically stores all configs, logs and pcap traces in
./autolog/<timestamp> dirs. After closing the components (by hitting enter),
you may also enter a name for the logs, after which they are stored in
./logs/<name>. The idea is to keep all important logs with a name, and that you
can every now and then just 'rm -rf ./autolog' to make space.


=== 3G

You may notice that the templates include nano3G.txt files. These include a
convenient listing of commands to connect to an ip.access nano3G DMI and
connect it to the HNBGW as configured by the templates.


=== 2G BTS

At the time of writing, there are no osmo-bts.cfg files, since this is intended
for the core network and BSC components only. Feel free to add!

Typically you'd need to edit only the /etc/osmocom/osmo-bts.cfg to match your
IP address and ipa unit-id:

bts 0
 oml remote-ip 192.168.0.23
 ipa unit-id 1234 0