start with USB CDC echo example
this is the Atmel START USB CDC Echo example project for the
SAM E54 Xplained Pro board using an Atmel ATSAME54P20A
microcontroller.
Atmel START information:
- Version: 1.4.1810 (Dec 18, 2018, 5:52 AM GMT+1)
- Server: 1.4.93
- Content version: 1.0.1340
This will serve as basis for the sysmoOCTSIM project
A jenkins contrib script has also been added to the
osmo-ccid-firmware project to build the sysmoOCTSIM firmware
Change-Id: I356de75e7b730d63fb819248e71d36f785932199
diff --git a/sysmoOCTSIM/include/instance/tc2.h b/sysmoOCTSIM/include/instance/tc2.h
new file mode 100644
index 0000000..455ff85
--- /dev/null
+++ b/sysmoOCTSIM/include/instance/tc2.h
@@ -0,0 +1,109 @@
+/**
+ * \file
+ *
+ * \brief Instance description for TC2
+ *
+ * Copyright (c) 2018 Microchip Technology Inc.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the Licence at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef _SAME54_TC2_INSTANCE_
+#define _SAME54_TC2_INSTANCE_
+
+/* ========== Register definition for TC2 peripheral ========== */
+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+#define REG_TC2_CTRLA (0x4101A000) /**< \brief (TC2) Control A */
+#define REG_TC2_CTRLBCLR (0x4101A004) /**< \brief (TC2) Control B Clear */
+#define REG_TC2_CTRLBSET (0x4101A005) /**< \brief (TC2) Control B Set */
+#define REG_TC2_EVCTRL (0x4101A006) /**< \brief (TC2) Event Control */
+#define REG_TC2_INTENCLR (0x4101A008) /**< \brief (TC2) Interrupt Enable Clear */
+#define REG_TC2_INTENSET (0x4101A009) /**< \brief (TC2) Interrupt Enable Set */
+#define REG_TC2_INTFLAG (0x4101A00A) /**< \brief (TC2) Interrupt Flag Status and Clear */
+#define REG_TC2_STATUS (0x4101A00B) /**< \brief (TC2) Status */
+#define REG_TC2_WAVE (0x4101A00C) /**< \brief (TC2) Waveform Generation Control */
+#define REG_TC2_DRVCTRL (0x4101A00D) /**< \brief (TC2) Control C */
+#define REG_TC2_DBGCTRL (0x4101A00F) /**< \brief (TC2) Debug Control */
+#define REG_TC2_SYNCBUSY (0x4101A010) /**< \brief (TC2) Synchronization Status */
+#define REG_TC2_COUNT16_COUNT (0x4101A014) /**< \brief (TC2) COUNT16 Count */
+#define REG_TC2_COUNT16_CC0 (0x4101A01C) /**< \brief (TC2) COUNT16 Compare and Capture 0 */
+#define REG_TC2_COUNT16_CC1 (0x4101A01E) /**< \brief (TC2) COUNT16 Compare and Capture 1 */
+#define REG_TC2_COUNT16_CCBUF0 (0x4101A030) /**< \brief (TC2) COUNT16 Compare and Capture Buffer 0 */
+#define REG_TC2_COUNT16_CCBUF1 (0x4101A032) /**< \brief (TC2) COUNT16 Compare and Capture Buffer 1 */
+#define REG_TC2_COUNT32_COUNT (0x4101A014) /**< \brief (TC2) COUNT32 Count */
+#define REG_TC2_COUNT32_CC0 (0x4101A01C) /**< \brief (TC2) COUNT32 Compare and Capture 0 */
+#define REG_TC2_COUNT32_CC1 (0x4101A020) /**< \brief (TC2) COUNT32 Compare and Capture 1 */
+#define REG_TC2_COUNT32_CCBUF0 (0x4101A030) /**< \brief (TC2) COUNT32 Compare and Capture Buffer 0 */
+#define REG_TC2_COUNT32_CCBUF1 (0x4101A034) /**< \brief (TC2) COUNT32 Compare and Capture Buffer 1 */
+#define REG_TC2_COUNT8_COUNT (0x4101A014) /**< \brief (TC2) COUNT8 Count */
+#define REG_TC2_COUNT8_PER (0x4101A01B) /**< \brief (TC2) COUNT8 Period */
+#define REG_TC2_COUNT8_CC0 (0x4101A01C) /**< \brief (TC2) COUNT8 Compare and Capture 0 */
+#define REG_TC2_COUNT8_CC1 (0x4101A01D) /**< \brief (TC2) COUNT8 Compare and Capture 1 */
+#define REG_TC2_COUNT8_PERBUF (0x4101A02F) /**< \brief (TC2) COUNT8 Period Buffer */
+#define REG_TC2_COUNT8_CCBUF0 (0x4101A030) /**< \brief (TC2) COUNT8 Compare and Capture Buffer 0 */
+#define REG_TC2_COUNT8_CCBUF1 (0x4101A031) /**< \brief (TC2) COUNT8 Compare and Capture Buffer 1 */
+#else
+#define REG_TC2_CTRLA (*(RwReg *)0x4101A000UL) /**< \brief (TC2) Control A */
+#define REG_TC2_CTRLBCLR (*(RwReg8 *)0x4101A004UL) /**< \brief (TC2) Control B Clear */
+#define REG_TC2_CTRLBSET (*(RwReg8 *)0x4101A005UL) /**< \brief (TC2) Control B Set */
+#define REG_TC2_EVCTRL (*(RwReg16*)0x4101A006UL) /**< \brief (TC2) Event Control */
+#define REG_TC2_INTENCLR (*(RwReg8 *)0x4101A008UL) /**< \brief (TC2) Interrupt Enable Clear */
+#define REG_TC2_INTENSET (*(RwReg8 *)0x4101A009UL) /**< \brief (TC2) Interrupt Enable Set */
+#define REG_TC2_INTFLAG (*(RwReg8 *)0x4101A00AUL) /**< \brief (TC2) Interrupt Flag Status and Clear */
+#define REG_TC2_STATUS (*(RwReg8 *)0x4101A00BUL) /**< \brief (TC2) Status */
+#define REG_TC2_WAVE (*(RwReg8 *)0x4101A00CUL) /**< \brief (TC2) Waveform Generation Control */
+#define REG_TC2_DRVCTRL (*(RwReg8 *)0x4101A00DUL) /**< \brief (TC2) Control C */
+#define REG_TC2_DBGCTRL (*(RwReg8 *)0x4101A00FUL) /**< \brief (TC2) Debug Control */
+#define REG_TC2_SYNCBUSY (*(RoReg *)0x4101A010UL) /**< \brief (TC2) Synchronization Status */
+#define REG_TC2_COUNT16_COUNT (*(RwReg16*)0x4101A014UL) /**< \brief (TC2) COUNT16 Count */
+#define REG_TC2_COUNT16_CC0 (*(RwReg16*)0x4101A01CUL) /**< \brief (TC2) COUNT16 Compare and Capture 0 */
+#define REG_TC2_COUNT16_CC1 (*(RwReg16*)0x4101A01EUL) /**< \brief (TC2) COUNT16 Compare and Capture 1 */
+#define REG_TC2_COUNT16_CCBUF0 (*(RwReg16*)0x4101A030UL) /**< \brief (TC2) COUNT16 Compare and Capture Buffer 0 */
+#define REG_TC2_COUNT16_CCBUF1 (*(RwReg16*)0x4101A032UL) /**< \brief (TC2) COUNT16 Compare and Capture Buffer 1 */
+#define REG_TC2_COUNT32_COUNT (*(RwReg *)0x4101A014UL) /**< \brief (TC2) COUNT32 Count */
+#define REG_TC2_COUNT32_CC0 (*(RwReg *)0x4101A01CUL) /**< \brief (TC2) COUNT32 Compare and Capture 0 */
+#define REG_TC2_COUNT32_CC1 (*(RwReg *)0x4101A020UL) /**< \brief (TC2) COUNT32 Compare and Capture 1 */
+#define REG_TC2_COUNT32_CCBUF0 (*(RwReg *)0x4101A030UL) /**< \brief (TC2) COUNT32 Compare and Capture Buffer 0 */
+#define REG_TC2_COUNT32_CCBUF1 (*(RwReg *)0x4101A034UL) /**< \brief (TC2) COUNT32 Compare and Capture Buffer 1 */
+#define REG_TC2_COUNT8_COUNT (*(RwReg8 *)0x4101A014UL) /**< \brief (TC2) COUNT8 Count */
+#define REG_TC2_COUNT8_PER (*(RwReg8 *)0x4101A01BUL) /**< \brief (TC2) COUNT8 Period */
+#define REG_TC2_COUNT8_CC0 (*(RwReg8 *)0x4101A01CUL) /**< \brief (TC2) COUNT8 Compare and Capture 0 */
+#define REG_TC2_COUNT8_CC1 (*(RwReg8 *)0x4101A01DUL) /**< \brief (TC2) COUNT8 Compare and Capture 1 */
+#define REG_TC2_COUNT8_PERBUF (*(RwReg8 *)0x4101A02FUL) /**< \brief (TC2) COUNT8 Period Buffer */
+#define REG_TC2_COUNT8_CCBUF0 (*(RwReg8 *)0x4101A030UL) /**< \brief (TC2) COUNT8 Compare and Capture Buffer 0 */
+#define REG_TC2_COUNT8_CCBUF1 (*(RwReg8 *)0x4101A031UL) /**< \brief (TC2) COUNT8 Compare and Capture Buffer 1 */
+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/* ========== Instance parameters for TC2 peripheral ========== */
+#define TC2_CC_NUM 2
+#define TC2_DMAC_ID_MC_0 51
+#define TC2_DMAC_ID_MC_1 52
+#define TC2_DMAC_ID_MC_LSB 51
+#define TC2_DMAC_ID_MC_MSB 52
+#define TC2_DMAC_ID_MC_SIZE 2
+#define TC2_DMAC_ID_OVF 50 // Indexes of DMA Overflow trigger
+#define TC2_EXT 0 // Coding of implemented extended features (keep 0 value)
+#define TC2_GCLK_ID 26 // Index of Generic Clock
+#define TC2_MASTER_SLAVE_MODE 1 // TC type 0 : NA, 1 : Master, 2 : Slave
+#define TC2_OW_NUM 2 // Number of Output Waveforms
+
+#endif /* _SAME54_TC2_INSTANCE_ */