start with USB CDC echo example
this is the Atmel START USB CDC Echo example project for the
SAM E54 Xplained Pro board using an Atmel ATSAME54P20A
microcontroller.
Atmel START information:
- Version: 1.4.1810 (Dec 18, 2018, 5:52 AM GMT+1)
- Server: 1.4.93
- Content version: 1.0.1340
This will serve as basis for the sysmoOCTSIM project
A jenkins contrib script has also been added to the
osmo-ccid-firmware project to build the sysmoOCTSIM firmware
Change-Id: I356de75e7b730d63fb819248e71d36f785932199
diff --git a/sysmoOCTSIM/include/instance/mclk.h b/sysmoOCTSIM/include/instance/mclk.h
new file mode 100644
index 0000000..1deeec1
--- /dev/null
+++ b/sysmoOCTSIM/include/instance/mclk.h
@@ -0,0 +1,61 @@
+/**
+ * \file
+ *
+ * \brief Instance description for MCLK
+ *
+ * Copyright (c) 2018 Microchip Technology Inc.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the Licence at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef _SAME54_MCLK_INSTANCE_
+#define _SAME54_MCLK_INSTANCE_
+
+/* ========== Register definition for MCLK peripheral ========== */
+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+#define REG_MCLK_INTENCLR (0x40000801) /**< \brief (MCLK) Interrupt Enable Clear */
+#define REG_MCLK_INTENSET (0x40000802) /**< \brief (MCLK) Interrupt Enable Set */
+#define REG_MCLK_INTFLAG (0x40000803) /**< \brief (MCLK) Interrupt Flag Status and Clear */
+#define REG_MCLK_HSDIV (0x40000804) /**< \brief (MCLK) HS Clock Division */
+#define REG_MCLK_CPUDIV (0x40000805) /**< \brief (MCLK) CPU Clock Division */
+#define REG_MCLK_AHBMASK (0x40000810) /**< \brief (MCLK) AHB Mask */
+#define REG_MCLK_APBAMASK (0x40000814) /**< \brief (MCLK) APBA Mask */
+#define REG_MCLK_APBBMASK (0x40000818) /**< \brief (MCLK) APBB Mask */
+#define REG_MCLK_APBCMASK (0x4000081C) /**< \brief (MCLK) APBC Mask */
+#define REG_MCLK_APBDMASK (0x40000820) /**< \brief (MCLK) APBD Mask */
+#else
+#define REG_MCLK_INTENCLR (*(RwReg8 *)0x40000801UL) /**< \brief (MCLK) Interrupt Enable Clear */
+#define REG_MCLK_INTENSET (*(RwReg8 *)0x40000802UL) /**< \brief (MCLK) Interrupt Enable Set */
+#define REG_MCLK_INTFLAG (*(RwReg8 *)0x40000803UL) /**< \brief (MCLK) Interrupt Flag Status and Clear */
+#define REG_MCLK_HSDIV (*(RoReg8 *)0x40000804UL) /**< \brief (MCLK) HS Clock Division */
+#define REG_MCLK_CPUDIV (*(RwReg8 *)0x40000805UL) /**< \brief (MCLK) CPU Clock Division */
+#define REG_MCLK_AHBMASK (*(RwReg *)0x40000810UL) /**< \brief (MCLK) AHB Mask */
+#define REG_MCLK_APBAMASK (*(RwReg *)0x40000814UL) /**< \brief (MCLK) APBA Mask */
+#define REG_MCLK_APBBMASK (*(RwReg *)0x40000818UL) /**< \brief (MCLK) APBB Mask */
+#define REG_MCLK_APBCMASK (*(RwReg *)0x4000081CUL) /**< \brief (MCLK) APBC Mask */
+#define REG_MCLK_APBDMASK (*(RwReg *)0x40000820UL) /**< \brief (MCLK) APBD Mask */
+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/* ========== Instance parameters for MCLK peripheral ========== */
+#define MCLK_SYSTEM_CLOCK 48000000 // System Clock Frequency at Reset
+
+#endif /* _SAME54_MCLK_INSTANCE_ */