start with USB CDC echo example
this is the Atmel START USB CDC Echo example project for the
SAM E54 Xplained Pro board using an Atmel ATSAME54P20A
microcontroller.
Atmel START information:
- Version: 1.4.1810 (Dec 18, 2018, 5:52 AM GMT+1)
- Server: 1.4.93
- Content version: 1.0.1340
This will serve as basis for the sysmoOCTSIM project
A jenkins contrib script has also been added to the
osmo-ccid-firmware project to build the sysmoOCTSIM firmware
Change-Id: I356de75e7b730d63fb819248e71d36f785932199
diff --git a/sysmoOCTSIM/include/instance/adc0.h b/sysmoOCTSIM/include/instance/adc0.h
new file mode 100644
index 0000000..aa28f05
--- /dev/null
+++ b/sysmoOCTSIM/include/instance/adc0.h
@@ -0,0 +1,99 @@
+/**
+ * \file
+ *
+ * \brief Instance description for ADC0
+ *
+ * Copyright (c) 2018 Microchip Technology Inc.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the Licence at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an AS IS BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef _SAME54_ADC0_INSTANCE_
+#define _SAME54_ADC0_INSTANCE_
+
+/* ========== Register definition for ADC0 peripheral ========== */
+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+#define REG_ADC0_CTRLA (0x43001C00) /**< \brief (ADC0) Control A */
+#define REG_ADC0_EVCTRL (0x43001C02) /**< \brief (ADC0) Event Control */
+#define REG_ADC0_DBGCTRL (0x43001C03) /**< \brief (ADC0) Debug Control */
+#define REG_ADC0_INPUTCTRL (0x43001C04) /**< \brief (ADC0) Input Control */
+#define REG_ADC0_CTRLB (0x43001C06) /**< \brief (ADC0) Control B */
+#define REG_ADC0_REFCTRL (0x43001C08) /**< \brief (ADC0) Reference Control */
+#define REG_ADC0_AVGCTRL (0x43001C0A) /**< \brief (ADC0) Average Control */
+#define REG_ADC0_SAMPCTRL (0x43001C0B) /**< \brief (ADC0) Sample Time Control */
+#define REG_ADC0_WINLT (0x43001C0C) /**< \brief (ADC0) Window Monitor Lower Threshold */
+#define REG_ADC0_WINUT (0x43001C0E) /**< \brief (ADC0) Window Monitor Upper Threshold */
+#define REG_ADC0_GAINCORR (0x43001C10) /**< \brief (ADC0) Gain Correction */
+#define REG_ADC0_OFFSETCORR (0x43001C12) /**< \brief (ADC0) Offset Correction */
+#define REG_ADC0_SWTRIG (0x43001C14) /**< \brief (ADC0) Software Trigger */
+#define REG_ADC0_INTENCLR (0x43001C2C) /**< \brief (ADC0) Interrupt Enable Clear */
+#define REG_ADC0_INTENSET (0x43001C2D) /**< \brief (ADC0) Interrupt Enable Set */
+#define REG_ADC0_INTFLAG (0x43001C2E) /**< \brief (ADC0) Interrupt Flag Status and Clear */
+#define REG_ADC0_STATUS (0x43001C2F) /**< \brief (ADC0) Status */
+#define REG_ADC0_SYNCBUSY (0x43001C30) /**< \brief (ADC0) Synchronization Busy */
+#define REG_ADC0_DSEQDATA (0x43001C34) /**< \brief (ADC0) DMA Sequencial Data */
+#define REG_ADC0_DSEQCTRL (0x43001C38) /**< \brief (ADC0) DMA Sequential Control */
+#define REG_ADC0_DSEQSTAT (0x43001C3C) /**< \brief (ADC0) DMA Sequencial Status */
+#define REG_ADC0_RESULT (0x43001C40) /**< \brief (ADC0) Result Conversion Value */
+#define REG_ADC0_RESS (0x43001C44) /**< \brief (ADC0) Last Sample Result */
+#define REG_ADC0_CALIB (0x43001C48) /**< \brief (ADC0) Calibration */
+#else
+#define REG_ADC0_CTRLA (*(RwReg16*)0x43001C00UL) /**< \brief (ADC0) Control A */
+#define REG_ADC0_EVCTRL (*(RwReg8 *)0x43001C02UL) /**< \brief (ADC0) Event Control */
+#define REG_ADC0_DBGCTRL (*(RwReg8 *)0x43001C03UL) /**< \brief (ADC0) Debug Control */
+#define REG_ADC0_INPUTCTRL (*(RwReg16*)0x43001C04UL) /**< \brief (ADC0) Input Control */
+#define REG_ADC0_CTRLB (*(RwReg16*)0x43001C06UL) /**< \brief (ADC0) Control B */
+#define REG_ADC0_REFCTRL (*(RwReg8 *)0x43001C08UL) /**< \brief (ADC0) Reference Control */
+#define REG_ADC0_AVGCTRL (*(RwReg8 *)0x43001C0AUL) /**< \brief (ADC0) Average Control */
+#define REG_ADC0_SAMPCTRL (*(RwReg8 *)0x43001C0BUL) /**< \brief (ADC0) Sample Time Control */
+#define REG_ADC0_WINLT (*(RwReg16*)0x43001C0CUL) /**< \brief (ADC0) Window Monitor Lower Threshold */
+#define REG_ADC0_WINUT (*(RwReg16*)0x43001C0EUL) /**< \brief (ADC0) Window Monitor Upper Threshold */
+#define REG_ADC0_GAINCORR (*(RwReg16*)0x43001C10UL) /**< \brief (ADC0) Gain Correction */
+#define REG_ADC0_OFFSETCORR (*(RwReg16*)0x43001C12UL) /**< \brief (ADC0) Offset Correction */
+#define REG_ADC0_SWTRIG (*(RwReg8 *)0x43001C14UL) /**< \brief (ADC0) Software Trigger */
+#define REG_ADC0_INTENCLR (*(RwReg8 *)0x43001C2CUL) /**< \brief (ADC0) Interrupt Enable Clear */
+#define REG_ADC0_INTENSET (*(RwReg8 *)0x43001C2DUL) /**< \brief (ADC0) Interrupt Enable Set */
+#define REG_ADC0_INTFLAG (*(RwReg8 *)0x43001C2EUL) /**< \brief (ADC0) Interrupt Flag Status and Clear */
+#define REG_ADC0_STATUS (*(RoReg8 *)0x43001C2FUL) /**< \brief (ADC0) Status */
+#define REG_ADC0_SYNCBUSY (*(RoReg *)0x43001C30UL) /**< \brief (ADC0) Synchronization Busy */
+#define REG_ADC0_DSEQDATA (*(WoReg *)0x43001C34UL) /**< \brief (ADC0) DMA Sequencial Data */
+#define REG_ADC0_DSEQCTRL (*(RwReg *)0x43001C38UL) /**< \brief (ADC0) DMA Sequential Control */
+#define REG_ADC0_DSEQSTAT (*(RoReg *)0x43001C3CUL) /**< \brief (ADC0) DMA Sequencial Status */
+#define REG_ADC0_RESULT (*(RoReg16*)0x43001C40UL) /**< \brief (ADC0) Result Conversion Value */
+#define REG_ADC0_RESS (*(RoReg16*)0x43001C44UL) /**< \brief (ADC0) Last Sample Result */
+#define REG_ADC0_CALIB (*(RwReg16*)0x43001C48UL) /**< \brief (ADC0) Calibration */
+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/* ========== Instance parameters for ADC0 peripheral ========== */
+#define ADC0_BANDGAP 27 // MUXPOS value to select BANDGAP
+#define ADC0_CTAT 29 // MUXPOS value to select CTAT
+#define ADC0_DMAC_ID_RESRDY 68 // index of DMA RESRDY trigger
+#define ADC0_DMAC_ID_SEQ 69 // Index of DMA SEQ trigger
+#define ADC0_EXTCHANNEL_MSB 15 // Number of external channels
+#define ADC0_GCLK_ID 40 // index of Generic Clock
+#define ADC0_MASTER_SLAVE_MODE 1 // ADC Master/Slave Mode
+#define ADC0_OPAMP2 0 // MUXPOS value to select OPAMP2
+#define ADC0_OPAMP01 0 // MUXPOS value to select OPAMP01
+#define ADC0_PTAT 28 // MUXPOS value to select PTAT
+#define ADC0_TOUCH_IMPLEMENTED 1 // TOUCH implemented or not
+
+#endif /* _SAME54_ADC0_INSTANCE_ */