start with USB CDC echo example
this is the Atmel START USB CDC Echo example project for the
SAM E54 Xplained Pro board using an Atmel ATSAME54P20A
microcontroller.
Atmel START information:
- Version: 1.4.1810 (Dec 18, 2018, 5:52 AM GMT+1)
- Server: 1.4.93
- Content version: 1.0.1340
This will serve as basis for the sysmoOCTSIM project
A jenkins contrib script has also been added to the
osmo-ccid-firmware project to build the sysmoOCTSIM firmware
Change-Id: I356de75e7b730d63fb819248e71d36f785932199
diff --git a/sysmoOCTSIM/hpl/gclk/hpl_gclk_base.h b/sysmoOCTSIM/hpl/gclk/hpl_gclk_base.h
new file mode 100644
index 0000000..3e7d282
--- /dev/null
+++ b/sysmoOCTSIM/hpl/gclk/hpl_gclk_base.h
@@ -0,0 +1,87 @@
+/**
+ * \file
+ *
+ * \brief Generic Clock Controller.
+ *
+ * Copyright (c) 2014-2018 Microchip Technology Inc. and its subsidiaries.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Subject to your compliance with these terms, you may use Microchip
+ * software and any derivatives exclusively with Microchip products.
+ * It is your responsibility to comply with third party license terms applicable
+ * to your use of third party software (including open source software) that
+ * may accompany Microchip software.
+ *
+ * THIS SOFTWARE IS SUPPLIED BY MICROCHIP "AS IS". NO WARRANTIES,
+ * WHETHER EXPRESS, IMPLIED OR STATUTORY, APPLY TO THIS SOFTWARE,
+ * INCLUDING ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY,
+ * AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL MICROCHIP BE
+ * LIABLE FOR ANY INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL
+ * LOSS, DAMAGE, COST OR EXPENSE OF ANY KIND WHATSOEVER RELATED TO THE
+ * SOFTWARE, HOWEVER CAUSED, EVEN IF MICROCHIP HAS BEEN ADVISED OF THE
+ * POSSIBILITY OR THE DAMAGES ARE FORESEEABLE. TO THE FULLEST EXTENT
+ * ALLOWED BY LAW, MICROCHIP'S TOTAL LIABILITY ON ALL CLAIMS IN ANY WAY
+ * RELATED TO THIS SOFTWARE WILL NOT EXCEED THE AMOUNT OF FEES, IF ANY,
+ * THAT YOU HAVE PAID DIRECTLY TO MICROCHIP FOR THIS SOFTWARE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef _HPL_GCLK_H_INCLUDED
+#define _HPL_GCLK_H_INCLUDED
+
+#include <compiler.h>
+#ifdef _UNIT_TEST_
+#include <hri_gclk1_v210_mock.h>
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \addtogroup gclk_group GCLK Hardware Proxy Layer
+ *
+ * \section gclk_hpl_rev Revision History
+ * - v0.0.0.1 Initial Commit
+ *
+ *@{
+ */
+
+/**
+ * \name HPL functions
+ */
+//@{
+/**
+ * \brief Enable clock on the given channel with the given clock source
+ *
+ * This function maps the given clock source to the given clock channel
+ * and enables channel.
+ *
+ * \param[in] channel The channel to enable clock for
+ * \param[in] source The clock source for the given channel
+ */
+static inline void _gclk_enable_channel(const uint8_t channel, const uint8_t source)
+{
+
+ hri_gclk_write_PCHCTRL_reg(GCLK, channel, source | GCLK_PCHCTRL_CHEN);
+}
+
+/**
+ * \brief Initialize GCLK generators by function references
+ * \param[in] bm Bit mapping for referenced generators,
+ * a bit 1 in position triggers generator initialization.
+ */
+void _gclk_init_generators_by_fref(uint32_t bm);
+
+//@}
+/**@}*/
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _HPL_GCLK_H_INCLUDED */