start with USB CDC echo example
this is the Atmel START USB CDC Echo example project for the
SAM E54 Xplained Pro board using an Atmel ATSAME54P20A
microcontroller.
Atmel START information:
- Version: 1.4.1810 (Dec 18, 2018, 5:52 AM GMT+1)
- Server: 1.4.93
- Content version: 1.0.1340
This will serve as basis for the sysmoOCTSIM project
A jenkins contrib script has also been added to the
osmo-ccid-firmware project to build the sysmoOCTSIM firmware
Change-Id: I356de75e7b730d63fb819248e71d36f785932199
diff --git a/sysmoOCTSIM/config/hpl_oscctrl_config.h b/sysmoOCTSIM/config/hpl_oscctrl_config.h
new file mode 100644
index 0000000..11e4a24
--- /dev/null
+++ b/sysmoOCTSIM/config/hpl_oscctrl_config.h
@@ -0,0 +1,634 @@
+/* Auto-generated config file hpl_oscctrl_config.h */
+#ifndef HPL_OSCCTRL_CONFIG_H
+#define HPL_OSCCTRL_CONFIG_H
+
+// <<< Use Configuration Wizard in Context Menu >>>
+
+// <e> External Multipurpose Crystal Oscillator Configuration
+// <i> Indicates whether configuration for XOSC0 is enabled or not
+// <id> enable_xosc0
+#ifndef CONF_XOSC0_CONFIG
+#define CONF_XOSC0_CONFIG 0
+#endif
+
+// <o> Frequency <8000000-48000000>
+// <i> Oscillation frequency of the resonator connected to the External Multipurpose Crystal Oscillator.
+// <id> xosc0_frequency
+#ifndef CONF_XOSC_FREQUENCY
+#define CONF_XOSC0_FREQUENCY 12000000
+#endif
+
+// <h> External Multipurpose Crystal Oscillator Control
+// <q> Oscillator enable
+// <i> Indicates whether External Multipurpose Crystal Oscillator is enabled or not
+// <id> xosc0_arch_enable
+#ifndef CONF_XOSC0_ENABLE
+#define CONF_XOSC0_ENABLE 0
+#endif
+
+// <o> Start-Up Time
+// <0x0=>31us
+// <0x1=>61us
+// <0x2=>122us
+// <0x3=>244us
+// <0x4=>488us
+// <0x5=>977us
+// <0x6=>1953us
+// <0x7=>3906us
+// <0x8=>7813us
+// <0x9=>15625us
+// <0xA=>31250us
+// <0xB=>62500us
+// <0xC=>125000us
+// <0xD=>250000us
+// <0xE=>500000us
+// <0xF=>1000000us
+// <id> xosc0_arch_startup
+#ifndef CONF_XOSC0_STARTUP
+#define CONF_XOSC0_STARTUP 0
+#endif
+
+// <q> Clock Switch Back
+// <i> Indicates whether Clock Switch Back is enabled or not
+// <id> xosc0_arch_swben
+#ifndef CONF_XOSC0_SWBEN
+#define CONF_XOSC0_SWBEN 0
+#endif
+
+// <q> Clock Failure Detector
+// <i> Indicates whether Clock Failure Detector is enabled or not
+// <id> xosc0_arch_cfden
+#ifndef CONF_XOSC0_CFDEN
+#define CONF_XOSC0_CFDEN 0
+#endif
+
+// <q> Automatic Loop Control Enable
+// <i> Indicates whether Automatic Loop Control is enabled or not
+// <id> xosc0_arch_enalc
+#ifndef CONF_XOSC0_ENALC
+#define CONF_XOSC0_ENALC 0
+#endif
+
+// <q> Low Buffer Gain Enable
+// <i> Indicates whether Low Buffer Gain is enabled or not
+// <id> xosc0_arch_lowbufgain
+#ifndef CONF_XOSC0_LOWBUFGAIN
+#define CONF_XOSC0_LOWBUFGAIN 0
+#endif
+
+// <q> On Demand Control
+// <i> Indicates whether On Demand Control is enabled or not
+// <id> xosc0_arch_ondemand
+#ifndef CONF_XOSC0_ONDEMAND
+#define CONF_XOSC0_ONDEMAND 0
+#endif
+
+// <q> Run in Standby
+// <i> Indicates whether Run in Standby is enabled or not
+// <id> xosc0_arch_runstdby
+#ifndef CONF_XOSC0_RUNSTDBY
+#define CONF_XOSC0_RUNSTDBY 0
+#endif
+
+// <q> Crystal connected to XIN/XOUT Enable
+// <i> Indicates whether the connections between the I/O pads and the external clock or crystal oscillator is enabled or not
+// <id> xosc0_arch_xtalen
+#ifndef CONF_XOSC0_XTALEN
+#define CONF_XOSC0_XTALEN 0
+#endif
+//</h>
+//</e>
+
+#if CONF_XOSC0_FREQUENCY >= 32000000
+#define CONF_XOSC0_CFDPRESC 0x0
+#define CONF_XOSC0_IMULT 0x7
+#define CONF_XOSC0_IPTAT 0x3
+#elif CONF_XOSC0_FREQUENCY >= 24000000
+#define CONF_XOSC0_CFDPRESC 0x1
+#define CONF_XOSC0_IMULT 0x6
+#define CONF_XOSC0_IPTAT 0x3
+#elif CONF_XOSC0_FREQUENCY >= 16000000
+#define CONF_XOSC0_CFDPRESC 0x2
+#define CONF_XOSC0_IMULT 0x5
+#define CONF_XOSC0_IPTAT 0x3
+#elif CONF_XOSC0_FREQUENCY >= 8000000
+#define CONF_XOSC0_CFDPRESC 0x3
+#define CONF_XOSC0_IMULT 0x4
+#define CONF_XOSC0_IPTAT 0x3
+#endif
+
+// <e> External Multipurpose Crystal Oscillator Configuration
+// <i> Indicates whether configuration for XOSC1 is enabled or not
+// <id> enable_xosc1
+#ifndef CONF_XOSC1_CONFIG
+#define CONF_XOSC1_CONFIG 1
+#endif
+
+// <o> Frequency <8000000-48000000>
+// <i> Oscillation frequency of the resonator connected to the External Multipurpose Crystal Oscillator.
+// <id> xosc1_frequency
+#ifndef CONF_XOSC_FREQUENCY
+#define CONF_XOSC1_FREQUENCY 12000000
+#endif
+
+// <h> External Multipurpose Crystal Oscillator Control
+// <q> Oscillator enable
+// <i> Indicates whether External Multipurpose Crystal Oscillator is enabled or not
+// <id> xosc1_arch_enable
+#ifndef CONF_XOSC1_ENABLE
+#define CONF_XOSC1_ENABLE 1
+#endif
+
+// <o> Start-Up Time
+// <0x0=>31us
+// <0x1=>61us
+// <0x2=>122us
+// <0x3=>244us
+// <0x4=>488us
+// <0x5=>977us
+// <0x6=>1953us
+// <0x7=>3906us
+// <0x8=>7813us
+// <0x9=>15625us
+// <0xA=>31250us
+// <0xB=>62500us
+// <0xC=>125000us
+// <0xD=>250000us
+// <0xE=>500000us
+// <0xF=>1000000us
+// <id> xosc1_arch_startup
+#ifndef CONF_XOSC1_STARTUP
+#define CONF_XOSC1_STARTUP 0
+#endif
+
+// <q> Clock Switch Back
+// <i> Indicates whether Clock Switch Back is enabled or not
+// <id> xosc1_arch_swben
+#ifndef CONF_XOSC1_SWBEN
+#define CONF_XOSC1_SWBEN 0
+#endif
+
+// <q> Clock Failure Detector
+// <i> Indicates whether Clock Failure Detector is enabled or not
+// <id> xosc1_arch_cfden
+#ifndef CONF_XOSC1_CFDEN
+#define CONF_XOSC1_CFDEN 0
+#endif
+
+// <q> Automatic Loop Control Enable
+// <i> Indicates whether Automatic Loop Control is enabled or not
+// <id> xosc1_arch_enalc
+#ifndef CONF_XOSC1_ENALC
+#define CONF_XOSC1_ENALC 0
+#endif
+
+// <q> Low Buffer Gain Enable
+// <i> Indicates whether Low Buffer Gain is enabled or not
+// <id> xosc1_arch_lowbufgain
+#ifndef CONF_XOSC1_LOWBUFGAIN
+#define CONF_XOSC1_LOWBUFGAIN 0
+#endif
+
+// <q> On Demand Control
+// <i> Indicates whether On Demand Control is enabled or not
+// <id> xosc1_arch_ondemand
+#ifndef CONF_XOSC1_ONDEMAND
+#define CONF_XOSC1_ONDEMAND 0
+#endif
+
+// <q> Run in Standby
+// <i> Indicates whether Run in Standby is enabled or not
+// <id> xosc1_arch_runstdby
+#ifndef CONF_XOSC1_RUNSTDBY
+#define CONF_XOSC1_RUNSTDBY 0
+#endif
+
+// <q> Crystal connected to XIN/XOUT Enable
+// <i> Indicates whether the connections between the I/O pads and the external clock or crystal oscillator is enabled or not
+// <id> xosc1_arch_xtalen
+#ifndef CONF_XOSC1_XTALEN
+#define CONF_XOSC1_XTALEN 1
+#endif
+//</h>
+//</e>
+
+#if CONF_XOSC1_FREQUENCY >= 32000000
+#define CONF_XOSC1_CFDPRESC 0x0
+#define CONF_XOSC1_IMULT 0x7
+#define CONF_XOSC1_IPTAT 0x3
+#elif CONF_XOSC1_FREQUENCY >= 24000000
+#define CONF_XOSC1_CFDPRESC 0x1
+#define CONF_XOSC1_IMULT 0x6
+#define CONF_XOSC1_IPTAT 0x3
+#elif CONF_XOSC1_FREQUENCY >= 16000000
+#define CONF_XOSC1_CFDPRESC 0x2
+#define CONF_XOSC1_IMULT 0x5
+#define CONF_XOSC1_IPTAT 0x3
+#elif CONF_XOSC1_FREQUENCY >= 8000000
+#define CONF_XOSC1_CFDPRESC 0x3
+#define CONF_XOSC1_IMULT 0x4
+#define CONF_XOSC1_IPTAT 0x3
+#endif
+
+// <e> DFLL Configuration
+// <i> Indicates whether configuration for DFLL is enabled or not
+// <id> enable_dfll
+#ifndef CONF_DFLL_CONFIG
+#define CONF_DFLL_CONFIG 1
+#endif
+
+// <y> Reference Clock Source
+// <GCLK_PCHCTRL_GEN_GCLK0_Val"> Generic clock generator 0
+// <GCLK_PCHCTRL_GEN_GCLK1_Val"> Generic clock generator 1
+// <GCLK_PCHCTRL_GEN_GCLK2_Val"> Generic clock generator 2
+// <GCLK_PCHCTRL_GEN_GCLK3_Val"> Generic clock generator 3
+// <GCLK_PCHCTRL_GEN_GCLK4_Val"> Generic clock generator 4
+// <GCLK_PCHCTRL_GEN_GCLK5_Val"> Generic clock generator 5
+// <GCLK_PCHCTRL_GEN_GCLK6_Val"> Generic clock generator 6
+// <GCLK_PCHCTRL_GEN_GCLK7_Val"> Generic clock generator 7
+// <GCLK_PCHCTRL_GEN_GCLK8_Val"> Generic clock generator 8
+// <GCLK_PCHCTRL_GEN_GCLK9_Val"> Generic clock generator 9
+// <GCLK_PCHCTRL_GEN_GCLK10_Val"> Generic clock generator 10
+// <GCLK_PCHCTRL_GEN_GCLK11_Val"> Generic clock generator 11
+// <i> Select the clock source
+// <id> dfll_ref_clock
+#ifndef CONF_DFLL_GCLK
+#define CONF_DFLL_GCLK GCLK_PCHCTRL_GEN_GCLK3_Val
+#endif
+
+// <h> Digital Frequency Locked Loop Control
+// <q> DFLL Enable
+// <i> Indicates whether DFLL is enabled or not
+// <id> dfll_arch_enable
+#ifndef CONF_DFLL_ENABLE
+#define CONF_DFLL_ENABLE 1
+#endif
+
+// <q> On Demand Control
+// <i> Indicates whether On Demand Control is enabled or not
+// <id> dfll_arch_ondemand
+#ifndef CONF_DFLL_ONDEMAND
+#define CONF_DFLL_ONDEMAND 0
+#endif
+
+// <q> Run in Standby
+// <i> Indicates whether Run in Standby is enabled or not
+// <id> dfll_arch_runstdby
+#ifndef CONF_DFLL_RUNSTDBY
+#define CONF_DFLL_RUNSTDBY 0
+#endif
+
+// <q> USB Clock Recovery Mode
+// <i> Indicates whether USB Clock Recovery Mode is enabled or not
+// <id> dfll_arch_usbcrm
+#ifndef CONF_DFLL_USBCRM
+#define CONF_DFLL_USBCRM 1
+#endif
+
+// <q> Wait Lock
+// <i> Indicates whether Wait Lock is enabled or not
+// <id> dfll_arch_waitlock
+#ifndef CONF_DFLL_WAITLOCK
+#define CONF_DFLL_WAITLOCK 0
+#endif
+
+// <q> Bypass Coarse Lock
+// <i> Indicates whether Bypass Coarse Lock is enabled or not
+// <id> dfll_arch_bplckc
+#ifndef CONF_DFLL_BPLCKC
+#define CONF_DFLL_BPLCKC 0
+#endif
+
+// <q> Quick Lock Disable
+// <i> Indicates whether Quick Lock Disable is enabled or not
+// <id> dfll_arch_qldis
+#ifndef CONF_DFLL_QLDIS
+#define CONF_DFLL_QLDIS 0
+#endif
+
+// <q> Chill Cycle Disable
+// <i> Indicates whether Chill Cycle Disable is enabled or not
+// <id> dfll_arch_ccdis
+#ifndef CONF_DFLL_CCDIS
+#define CONF_DFLL_CCDIS 1
+#endif
+
+// <q> Lose Lock After Wake
+// <i> Indicates whether Lose Lock After Wake is enabled or not
+// <id> dfll_arch_llaw
+#ifndef CONF_DFLL_LLAW
+#define CONF_DFLL_LLAW 0
+#endif
+
+// <q> Stable DFLL Frequency
+// <i> Indicates whether Stable DFLL Frequency is enabled or not
+// <id> dfll_arch_stable
+#ifndef CONF_DFLL_STABLE
+#define CONF_DFLL_STABLE 0
+#endif
+
+// <o> Operating Mode Selection
+// <0=>Open Loop Mode
+// <1=>Closed Loop Mode
+// <id> dfll_mode
+#ifndef CONF_DFLL_MODE
+#define CONF_DFLL_MODE 0x1
+#endif
+
+// <o> Coarse Maximum Step <0x0-0x1F>
+// <id> dfll_arch_cstep
+#ifndef CONF_DFLL_CSTEP
+#define CONF_DFLL_CSTEP 0x1
+#endif
+
+// <o> Fine Maximum Step <0x0-0xFF>
+// <id> dfll_arch_fstep
+#ifndef CONF_DFLL_FSTEP
+#define CONF_DFLL_FSTEP 0x1
+#endif
+
+// <o> DFLL Multiply Factor <0x0-0xFFFF>
+// <id> dfll_mul
+#ifndef CONF_DFLL_MUL
+#define CONF_DFLL_MUL 0xbb80
+#endif
+
+// <e> DFLL Calibration Overwrite
+// <i> Indicates whether Overwrite Calibration value of DFLL
+// <id> dfll_arch_calibration
+#ifndef CONF_DFLL_OVERWRITE_CALIBRATION
+#define CONF_DFLL_OVERWRITE_CALIBRATION 0
+#endif
+
+// <o> Coarse Value <0x0-0x3F>
+// <id> dfll_arch_coarse
+#ifndef CONF_DFLL_COARSE
+#define CONF_DFLL_COARSE (0x1f / 4)
+#endif
+
+// <o> Fine Value <0x0-0xFF>
+// <id> dfll_arch_fine
+#ifndef CONF_DFLL_FINE
+#define CONF_DFLL_FINE (0x80)
+#endif
+
+//</e>
+
+//</h>
+
+//</e>
+
+// <e> FDPLL0 Configuration
+// <i> Indicates whether configuration for FDPLL0 is enabled or not
+// <id> enable_fdpll0
+#ifndef CONF_FDPLL0_CONFIG
+#define CONF_FDPLL0_CONFIG 0
+#endif
+
+// <y> Reference Clock Source
+// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K)
+// <GCLK_GENCTRL_SRC_XOSC0"> External Crystal Oscillator 8-48MHz (XOSC0)
+// <GCLK_GENCTRL_SRC_XOSC1"> External Crystal Oscillator 8-48MHz (XOSC1)
+// <GCLK_PCHCTRL_GEN_GCLK0_Val"> Generic clock generator 0
+// <GCLK_PCHCTRL_GEN_GCLK1_Val"> Generic clock generator 1
+// <GCLK_PCHCTRL_GEN_GCLK2_Val"> Generic clock generator 2
+// <GCLK_PCHCTRL_GEN_GCLK3_Val"> Generic clock generator 3
+// <GCLK_PCHCTRL_GEN_GCLK4_Val"> Generic clock generator 4
+// <GCLK_PCHCTRL_GEN_GCLK5_Val"> Generic clock generator 5
+// <GCLK_PCHCTRL_GEN_GCLK6_Val"> Generic clock generator 6
+// <GCLK_PCHCTRL_GEN_GCLK7_Val"> Generic clock generator 7
+// <GCLK_PCHCTRL_GEN_GCLK8_Val"> Generic clock generator 8
+// <GCLK_PCHCTRL_GEN_GCLK9_Val"> Generic clock generator 9
+// <GCLK_PCHCTRL_GEN_GCLK10_Val"> Generic clock generator 10
+// <GCLK_PCHCTRL_GEN_GCLK11_Val"> Generic clock generator 11
+// <i> Select the clock source.
+// <id> fdpll0_ref_clock
+#ifndef CONF_FDPLL0_GCLK
+#define CONF_FDPLL0_GCLK GCLK_GENCTRL_SRC_XOSC32K
+#endif
+
+// <h> Digital Phase Locked Loop Control
+// <q> Enable
+// <i> Indicates whether Digital Phase Locked Loop is enabled or not
+// <id> fdpll0_arch_enable
+#ifndef CONF_FDPLL0_ENABLE
+#define CONF_FDPLL0_ENABLE 0
+#endif
+
+// <q> On Demand Control
+// <i> Indicates whether On Demand Control is enabled or not
+// <id> fdpll0_arch_ondemand
+#ifndef CONF_FDPLL0_ONDEMAND
+#define CONF_FDPLL0_ONDEMAND 0
+#endif
+
+// <q> Run in Standby
+// <i> Indicates whether Run in Standby is enabled or not
+// <id> fdpll0_arch_runstdby
+#ifndef CONF_FDPLL0_RUNSTDBY
+#define CONF_FDPLL0_RUNSTDBY 0
+#endif
+
+// <o> Loop Divider Ratio Fractional Part <0x0-0x1F>
+// <id> fdpll0_ldrfrac
+#ifndef CONF_FDPLL0_LDRFRAC
+#define CONF_FDPLL0_LDRFRAC 0xd
+#endif
+
+// <o> Loop Divider Ratio Integer Part <0x0-0x1FFF>
+// <id> fdpll0_ldr
+#ifndef CONF_FDPLL0_LDR
+#define CONF_FDPLL0_LDR 0x5b7
+#endif
+
+// <o> Clock Divider <0x0-0x7FF>
+// <id> fdpll0_clock_div
+#ifndef CONF_FDPLL0_DIV
+#define CONF_FDPLL0_DIV 0x0
+#endif
+
+// <q> DCO Filter Enable
+// <i> Indicates whether DCO Filter Enable is enabled or not
+// <id> fdpll0_arch_dcoen
+#ifndef CONF_FDPLL0_DCOEN
+#define CONF_FDPLL0_DCOEN 0
+#endif
+
+// <o> Sigma-Delta DCO Filter Selection <0x0-0x7>
+// <id> fdpll0_clock_dcofilter
+#ifndef CONF_FDPLL0_DCOFILTER
+#define CONF_FDPLL0_DCOFILTER 0x0
+#endif
+
+// <q> Lock Bypass
+// <i> Indicates whether Lock Bypass is enabled or not
+// <id> fdpll0_arch_lbypass
+#ifndef CONF_FDPLL0_LBYPASS
+#define CONF_FDPLL0_LBYPASS 0
+#endif
+
+// <o> Lock Time
+// <0x0=>No time-out, automatic lock
+// <0x4=>The Time-out if no lock within 800 us
+// <0x5=>The Time-out if no lock within 900 us
+// <0x6=>The Time-out if no lock within 1 ms
+// <0x7=>The Time-out if no lock within 11 ms
+// <id> fdpll0_arch_ltime
+#ifndef CONF_FDPLL0_LTIME
+#define CONF_FDPLL0_LTIME 0x0
+#endif
+
+// <o> Reference Clock Selection
+// <0x0=>GCLK clock reference
+// <0x1=>XOSC32K clock reference
+// <0x2=>XOSC0 clock reference
+// <0x3=>XOSC1 clock reference
+// <id> fdpll0_arch_refclk
+#ifndef CONF_FDPLL0_REFCLK
+#define CONF_FDPLL0_REFCLK 0x1
+#endif
+
+// <q> Wake Up Fast
+// <i> Indicates whether Wake Up Fast is enabled or not
+// <id> fdpll0_arch_wuf
+#ifndef CONF_FDPLL0_WUF
+#define CONF_FDPLL0_WUF 0
+#endif
+
+// <o> Proportional Integral Filter Selection <0x0-0xF>
+// <id> fdpll0_arch_filter
+#ifndef CONF_FDPLL0_FILTER
+#define CONF_FDPLL0_FILTER 0x0
+#endif
+
+//</h>
+//</e>
+// <e> FDPLL1 Configuration
+// <i> Indicates whether configuration for FDPLL1 is enabled or not
+// <id> enable_fdpll1
+#ifndef CONF_FDPLL1_CONFIG
+#define CONF_FDPLL1_CONFIG 0
+#endif
+
+// <y> Reference Clock Source
+// <GCLK_GENCTRL_SRC_XOSC32K"> 32kHz External Crystal Oscillator (XOSC32K)
+// <GCLK_GENCTRL_SRC_XOSC0"> External Crystal Oscillator 8-48MHz (XOSC0)
+// <GCLK_GENCTRL_SRC_XOSC1"> External Crystal Oscillator 8-48MHz (XOSC1)
+// <GCLK_PCHCTRL_GEN_GCLK0_Val"> Generic clock generator 0
+// <GCLK_PCHCTRL_GEN_GCLK1_Val"> Generic clock generator 1
+// <GCLK_PCHCTRL_GEN_GCLK2_Val"> Generic clock generator 2
+// <GCLK_PCHCTRL_GEN_GCLK3_Val"> Generic clock generator 3
+// <GCLK_PCHCTRL_GEN_GCLK4_Val"> Generic clock generator 4
+// <GCLK_PCHCTRL_GEN_GCLK5_Val"> Generic clock generator 5
+// <GCLK_PCHCTRL_GEN_GCLK6_Val"> Generic clock generator 6
+// <GCLK_PCHCTRL_GEN_GCLK7_Val"> Generic clock generator 7
+// <GCLK_PCHCTRL_GEN_GCLK8_Val"> Generic clock generator 8
+// <GCLK_PCHCTRL_GEN_GCLK9_Val"> Generic clock generator 9
+// <GCLK_PCHCTRL_GEN_GCLK10_Val"> Generic clock generator 10
+// <GCLK_PCHCTRL_GEN_GCLK11_Val"> Generic clock generator 11
+// <i> Select the clock source.
+// <id> fdpll1_ref_clock
+#ifndef CONF_FDPLL1_GCLK
+#define CONF_FDPLL1_GCLK GCLK_GENCTRL_SRC_XOSC32K
+#endif
+
+// <h> Digital Phase Locked Loop Control
+// <q> Enable
+// <i> Indicates whether Digital Phase Locked Loop is enabled or not
+// <id> fdpll1_arch_enable
+#ifndef CONF_FDPLL1_ENABLE
+#define CONF_FDPLL1_ENABLE 0
+#endif
+
+// <q> On Demand Control
+// <i> Indicates whether On Demand Control is enabled or not
+// <id> fdpll1_arch_ondemand
+#ifndef CONF_FDPLL1_ONDEMAND
+#define CONF_FDPLL1_ONDEMAND 0
+#endif
+
+// <q> Run in Standby
+// <i> Indicates whether Run in Standby is enabled or not
+// <id> fdpll1_arch_runstdby
+#ifndef CONF_FDPLL1_RUNSTDBY
+#define CONF_FDPLL1_RUNSTDBY 0
+#endif
+
+// <o> Loop Divider Ratio Fractional Part <0x0-0x1F>
+// <id> fdpll1_ldrfrac
+#ifndef CONF_FDPLL1_LDRFRAC
+#define CONF_FDPLL1_LDRFRAC 0xd
+#endif
+
+// <o> Loop Divider Ratio Integer Part <0x0-0x1FFF>
+// <id> fdpll1_ldr
+#ifndef CONF_FDPLL1_LDR
+#define CONF_FDPLL1_LDR 0x5b7
+#endif
+
+// <o> Clock Divider <0x0-0x7FF>
+// <id> fdpll1_clock_div
+#ifndef CONF_FDPLL1_DIV
+#define CONF_FDPLL1_DIV 0x0
+#endif
+
+// <q> DCO Filter Enable
+// <i> Indicates whether DCO Filter Enable is enabled or not
+// <id> fdpll1_arch_dcoen
+#ifndef CONF_FDPLL1_DCOEN
+#define CONF_FDPLL1_DCOEN 0
+#endif
+
+// <o> Sigma-Delta DCO Filter Selection <0x0-0x7>
+// <id> fdpll1_clock_dcofilter
+#ifndef CONF_FDPLL1_DCOFILTER
+#define CONF_FDPLL1_DCOFILTER 0x0
+#endif
+
+// <q> Lock Bypass
+// <i> Indicates whether Lock Bypass is enabled or not
+// <id> fdpll1_arch_lbypass
+#ifndef CONF_FDPLL1_LBYPASS
+#define CONF_FDPLL1_LBYPASS 0
+#endif
+
+// <o> Lock Time
+// <0x0=>No time-out, automatic lock
+// <0x4=>The Time-out if no lock within 800 us
+// <0x5=>The Time-out if no lock within 900 us
+// <0x6=>The Time-out if no lock within 1 ms
+// <0x7=>The Time-out if no lock within 11 ms
+// <id> fdpll1_arch_ltime
+#ifndef CONF_FDPLL1_LTIME
+#define CONF_FDPLL1_LTIME 0x0
+#endif
+
+// <o> Reference Clock Selection
+// <0x0=>GCLK clock reference
+// <0x1=>XOSC32K clock reference
+// <0x2=>XOSC0 clock reference
+// <0x3=>XOSC1 clock reference
+// <id> fdpll1_arch_refclk
+#ifndef CONF_FDPLL1_REFCLK
+#define CONF_FDPLL1_REFCLK 0x1
+#endif
+
+// <q> Wake Up Fast
+// <i> Indicates whether Wake Up Fast is enabled or not
+// <id> fdpll1_arch_wuf
+#ifndef CONF_FDPLL1_WUF
+#define CONF_FDPLL1_WUF 0
+#endif
+
+// <o> Proportional Integral Filter Selection <0x0-0xF>
+// <id> fdpll1_arch_filter
+#ifndef CONF_FDPLL1_FILTER
+#define CONF_FDPLL1_FILTER 0x0
+#endif
+
+//</h>
+//</e>
+
+// <<< end of configuration section >>>
+
+#endif // HPL_OSCCTRL_CONFIG_H