start with USB CDC echo example
this is the Atmel START USB CDC Echo example project for the
SAM E54 Xplained Pro board using an Atmel ATSAME54P20A
microcontroller.
Atmel START information:
- Version: 1.4.1810 (Dec 18, 2018, 5:52 AM GMT+1)
- Server: 1.4.93
- Content version: 1.0.1340
This will serve as basis for the sysmoOCTSIM project
A jenkins contrib script has also been added to the
osmo-ccid-firmware project to build the sysmoOCTSIM firmware
Change-Id: I356de75e7b730d63fb819248e71d36f785932199
diff --git a/sysmoOCTSIM/config/hpl_mclk_config.h b/sysmoOCTSIM/config/hpl_mclk_config.h
new file mode 100644
index 0000000..a5a7de5
--- /dev/null
+++ b/sysmoOCTSIM/config/hpl_mclk_config.h
@@ -0,0 +1,104 @@
+/* Auto-generated config file hpl_mclk_config.h */
+#ifndef HPL_MCLK_CONFIG_H
+#define HPL_MCLK_CONFIG_H
+
+// <<< Use Configuration Wizard in Context Menu >>>
+
+#include <peripheral_clk_config.h>
+
+// <e> System Configuration
+// <i> Indicates whether configuration for system is enabled or not
+// <id> enable_cpu_clock
+#ifndef CONF_SYSTEM_CONFIG
+#define CONF_SYSTEM_CONFIG 1
+#endif
+
+// <h> Basic settings
+// <y> CPU Clock source
+// <GCLK_PCHCTRL_GEN_GCLK0_Val"> Generic clock generator 0
+// <i> This defines the clock source for the CPU
+// <id> cpu_clock_source
+#ifndef CONF_CPU_SRC
+#define CONF_CPU_SRC GCLK_PCHCTRL_GEN_GCLK0_Val
+#endif
+
+// <y> CPU Clock Division Factor
+// <MCLK_CPUDIV_DIV_DIV1_Val"> 1
+// <MCLK_CPUDIV_DIV_DIV2_Val"> 2
+// <MCLK_CPUDIV_DIV_DIV4_Val"> 4
+// <MCLK_CPUDIV_DIV_DIV8_Val"> 8
+// <MCLK_CPUDIV_DIV_DIV16_Val"> 16
+// <MCLK_CPUDIV_DIV_DIV32_Val"> 32
+// <MCLK_CPUDIV_DIV_DIV64_Val"> 64
+// <MCLK_CPUDIV_DIV_DIV128_Val"> 128
+// <i> Prescalar for CPU clock
+// <id> cpu_div
+#ifndef CONF_MCLK_CPUDIV
+#define CONF_MCLK_CPUDIV MCLK_CPUDIV_DIV_DIV1_Val
+#endif
+// <y> Low Power Clock Division
+// <MCLK_LPDIV_LPDIV_DIV1_Val"> Divide by 1
+// <MCLK_LPDIV_LPDIV_DIV2_Val"> Divide by 2
+// <MCLK_LPDIV_LPDIV_DIV4_Val"> Divide by 4
+// <MCLK_LPDIV_LPDIV_DIV8_Val"> Divide by 8
+// <MCLK_LPDIV_LPDIV_DIV16_Val"> Divide by 16
+// <MCLK_LPDIV_LPDIV_DIV32_Val"> Divide by 32
+// <MCLK_LPDIV_LPDIV_DIV64_Val"> Divide by 64
+// <MCLK_LPDIV_LPDIV_DIV128_Val"> Divide by 128
+// <id> mclk_arch_lpdiv
+#ifndef CONF_MCLK_LPDIV
+#define CONF_MCLK_LPDIV MCLK_LPDIV_LPDIV_DIV4_Val
+#endif
+
+// <y> Backup Clock Division
+// <MCLK_BUPDIV_BUPDIV_DIV1_Val"> Divide by 1
+// <MCLK_BUPDIV_BUPDIV_DIV2_Val"> Divide by 2
+// <MCLK_BUPDIV_BUPDIV_DIV4_Val"> Divide by 4
+// <MCLK_BUPDIV_BUPDIV_DIV8_Val"> Divide by 8
+// <MCLK_BUPDIV_BUPDIV_DIV16_Val"> Divide by 16
+// <MCLK_BUPDIV_BUPDIV_DIV32_Val"> Divide by 32
+// <MCLK_BUPDIV_BUPDIV_DIV64_Val"> Divide by 64
+// <MCLK_BUPDIV_BUPDIV_DIV128_Val"> Divide by 128
+// <id> mclk_arch_bupdiv
+#ifndef CONF_MCLK_BUPDIV
+#define CONF_MCLK_BUPDIV MCLK_BUPDIV_BUPDIV_DIV8_Val
+#endif
+// <y> High-Speed Clock Division
+// <MCLK_HSDIV_DIV_DIV1_Val"> Divide by 1
+// <id> mclk_arch_hsdiv
+#ifndef CONF_MCLK_HSDIV
+#define CONF_MCLK_HSDIV MCLK_HSDIV_DIV_DIV1_Val
+#endif
+// </h>
+
+// <h> NVM Settings
+// <o> NVM Wait States
+// <i> These bits select the number of wait states for a read operation.
+// <0=> 0
+// <1=> 1
+// <2=> 2
+// <3=> 3
+// <4=> 4
+// <5=> 5
+// <6=> 6
+// <7=> 7
+// <8=> 8
+// <9=> 9
+// <10=> 10
+// <11=> 11
+// <12=> 12
+// <13=> 13
+// <14=> 14
+// <15=> 15
+// <id> nvm_wait_states
+#ifndef CONF_NVM_WAIT_STATE
+#define CONF_NVM_WAIT_STATE 0
+#endif
+
+// </h>
+
+// </e>
+
+// <<< end of configuration section >>>
+
+#endif // HPL_MCLK_CONFIG_H