add SERCOM peripheral for UART debug
currently only the SERCOM peripheral driver is added an configured,
but it is not being used.
UART debug will be done through the EDBG COM port, on PB24/PB25 of
SAM E54 Xplained Pro board
Change-Id: Id7af37ce1dd2d0a356e019c96bf6438ce459411b
diff --git a/sysmoOCTSIM/armcc/Makefile b/sysmoOCTSIM/armcc/Makefile
index a131e45..3a130a8 100644
--- a/sysmoOCTSIM/armcc/Makefile
+++ b/sysmoOCTSIM/armcc/Makefile
@@ -37,11 +37,12 @@
usb \
armcc/arm_addon/armcc/arm \
hal/utils/src \
-armcc/arm_addon/armcc \
+hpl/sercom \
examples \
hpl/gclk \
usb/device \
hpl/oscctrl \
+armcc/arm_addon/armcc \
hpl/usb \
hpl/core \
hpl/cmcc
@@ -62,6 +63,7 @@
hal/utils/src/utils_assert.o \
usb_start.o \
hpl/oscctrl/hpl_oscctrl.o \
+hal/src/hal_usart_sync.o \
hpl/mclk/hpl_mclk.o \
hpl/ramecc/hpl_ramecc.o \
usb/usb_protocol.o \
@@ -70,6 +72,7 @@
hpl/osc32kctrl/hpl_osc32kctrl.o \
examples/driver_examples.o \
driver_init.o \
+hpl/sercom/hpl_sercom.o \
hal/src/hal_gpio.o \
hal/utils/src/utils_event.o \
hal/src/hal_sleep.o \
@@ -96,6 +99,7 @@
"hal/utils/src/utils_assert.o" \
"usb_start.o" \
"hpl/oscctrl/hpl_oscctrl.o" \
+"hal/src/hal_usart_sync.o" \
"hpl/mclk/hpl_mclk.o" \
"hpl/ramecc/hpl_ramecc.o" \
"usb/usb_protocol.o" \
@@ -104,6 +108,7 @@
"hpl/osc32kctrl/hpl_osc32kctrl.o" \
"examples/driver_examples.o" \
"driver_init.o" \
+"hpl/sercom/hpl_sercom.o" \
"hal/src/hal_gpio.o" \
"hal/utils/src/utils_event.o" \
"hal/src/hal_sleep.o" \
@@ -138,6 +143,7 @@
"hal/src/hal_usb_device.d" \
"hpl/dmac/hpl_dmac.d" \
"hal/src/hal_init.d" \
+"hal/src/hal_usart_sync.d" \
"usb_cdc_echo_main.d" \
"hpl/mclk/hpl_mclk.d" \
"driver_init.d" \
@@ -145,6 +151,7 @@
"examples/driver_examples.d" \
"hal/src/hal_cache.d" \
"hal/src/hal_sleep.d" \
+"hpl/sercom/hpl_sercom.d" \
"hal/src/hal_gpio.d" \
"hal/src/hal_atomic.d" \
"usb/device/usbdc.d" \
@@ -186,7 +193,7 @@
@echo Building file: $<
@echo ARMCC Compiler
$(QUOTE)armcc$(QUOTE) --c99 -c -DDEBUG -O1 -g --apcs=interwork --split_sections --cpu Cortex-M4 -D__SAME54P20A__ \
--I"../" -I"../config" -I"../examples" -I"../hal/include" -I"../hal/utils/include" -I"../hpl/cmcc" -I"../hpl/core" -I"../hpl/dmac" -I"../hpl/gclk" -I"../hpl/mclk" -I"../hpl/osc32kctrl" -I"../hpl/oscctrl" -I"../hpl/pm" -I"../hpl/port" -I"../hpl/ramecc" -I"../hpl/usb" -I"../hri" -I"../" -I"../config" -I"../usb" -I"../usb/class/cdc" -I"../usb/class/cdc/device" -I"../usb/device" -I"../" -I"../CMSIS/Include" -I"../include" \
+-I"../" -I"../config" -I"../examples" -I"../hal/include" -I"../hal/utils/include" -I"../hpl/cmcc" -I"../hpl/core" -I"../hpl/dmac" -I"../hpl/gclk" -I"../hpl/mclk" -I"../hpl/osc32kctrl" -I"../hpl/oscctrl" -I"../hpl/pm" -I"../hpl/port" -I"../hpl/ramecc" -I"../hpl/sercom" -I"../hpl/usb" -I"../hri" -I"../" -I"../config" -I"../usb" -I"../usb/class/cdc" -I"../usb/class/cdc/device" -I"../usb/device" -I"../" -I"../CMSIS/Include" -I"../include" \
--depend "$@" -o "$@" "$<"
@echo Finished building: $<
@@ -195,7 +202,7 @@
@echo Building file: $<
@echo ARMCC Assembler
$(QUOTE)armasm$(QUOTE) -g --apcs=interwork --cpu Cortex-M4 --pd "D__SAME54P20A__ SETA 1" \
--I"../" -I"../config" -I"../examples" -I"../hal/include" -I"../hal/utils/include" -I"../hpl/cmcc" -I"../hpl/core" -I"../hpl/dmac" -I"../hpl/gclk" -I"../hpl/mclk" -I"../hpl/osc32kctrl" -I"../hpl/oscctrl" -I"../hpl/pm" -I"../hpl/port" -I"../hpl/ramecc" -I"../hpl/usb" -I"../hri" -I"../" -I"../config" -I"../usb" -I"../usb/class/cdc" -I"../usb/class/cdc/device" -I"../usb/device" -I"../" -I"../CMSIS/Include" -I"../include" \
+-I"../" -I"../config" -I"../examples" -I"../hal/include" -I"../hal/utils/include" -I"../hpl/cmcc" -I"../hpl/core" -I"../hpl/dmac" -I"../hpl/gclk" -I"../hpl/mclk" -I"../hpl/osc32kctrl" -I"../hpl/oscctrl" -I"../hpl/pm" -I"../hpl/port" -I"../hpl/ramecc" -I"../hpl/sercom" -I"../hpl/usb" -I"../hri" -I"../" -I"../config" -I"../usb" -I"../usb/class/cdc" -I"../usb/class/cdc/device" -I"../usb/device" -I"../" -I"../CMSIS/Include" -I"../include" \
--depend "$(@:%.o=%.d)" -o "$@" "$<"
@echo Finished building: $<
@@ -204,7 +211,7 @@
@echo Building file: $<
@echo ARMCC Preprocessing Assembler
$(QUOTE)armcc$(QUOTE) --c99 -c -DDEBUG -O1 -g --apcs=interwork --split_sections --cpu Cortex-M4 -D__SAME54P20A__ \
--I"../" -I"../config" -I"../examples" -I"../hal/include" -I"../hal/utils/include" -I"../hpl/cmcc" -I"../hpl/core" -I"../hpl/dmac" -I"../hpl/gclk" -I"../hpl/mclk" -I"../hpl/osc32kctrl" -I"../hpl/oscctrl" -I"../hpl/pm" -I"../hpl/port" -I"../hpl/ramecc" -I"../hpl/usb" -I"../hri" -I"../" -I"../config" -I"../usb" -I"../usb/class/cdc" -I"../usb/class/cdc/device" -I"../usb/device" -I"../" -I"../CMSIS/Include" -I"../include" \
+-I"../" -I"../config" -I"../examples" -I"../hal/include" -I"../hal/utils/include" -I"../hpl/cmcc" -I"../hpl/core" -I"../hpl/dmac" -I"../hpl/gclk" -I"../hpl/mclk" -I"../hpl/osc32kctrl" -I"../hpl/oscctrl" -I"../hpl/pm" -I"../hpl/port" -I"../hpl/ramecc" -I"../hpl/sercom" -I"../hpl/usb" -I"../hri" -I"../" -I"../config" -I"../usb" -I"../usb/class/cdc" -I"../usb/class/cdc/device" -I"../usb/device" -I"../" -I"../CMSIS/Include" -I"../include" \
--depend "$@" -o "$@" "$<"
@echo Finished building: $<