diff --git a/sysmoOCTSIM/config/hpl_gclk_config.h b/sysmoOCTSIM/config/hpl_gclk_config.h
index 306d90e..8d10f38 100644
--- a/sysmoOCTSIM/config/hpl_gclk_config.h
+++ b/sysmoOCTSIM/config/hpl_gclk_config.h
@@ -25,7 +25,7 @@
 // <i> This defines the clock source for generic clock generator 0
 // <id> gclk_gen_0_oscillator
 #ifndef CONF_GCLK_GEN_0_SOURCE
-#define CONF_GCLK_GEN_0_SOURCE GCLK_GENCTRL_SRC_XOSC1
+#define CONF_GCLK_GEN_0_SOURCE GCLK_GENCTRL_SRC_DPLL0
 #endif
 
 // <q> Run in Standby
@@ -843,7 +843,7 @@
 // <i> Indicates whether generic clock 11 configuration is enabled or not
 // <id> enable_gclk_gen_11
 #ifndef CONF_GCLK_GENERATOR_11_CONFIG
-#define CONF_GCLK_GENERATOR_11_CONFIG 0
+#define CONF_GCLK_GENERATOR_11_CONFIG 1
 #endif
 
 // <h> Generic Clock Generator Control
@@ -860,7 +860,7 @@
 // <i> This defines the clock source for generic clock generator 11
 // <id> gclk_gen_11_oscillator
 #ifndef CONF_GCLK_GEN_11_SOURCE
-#define CONF_GCLK_GEN_11_SOURCE GCLK_GENCTRL_SRC_XOSC0
+#define CONF_GCLK_GEN_11_SOURCE GCLK_GENCTRL_SRC_XOSC1
 #endif
 
 // <q> Run in Standby
@@ -902,7 +902,7 @@
 // <i> Indicates whether Generic Clock Generator Enable is enabled or not
 // <id> gclk_arch_gen_11_enable
 #ifndef CONF_GCLK_GEN_11_GENEN
-#define CONF_GCLK_GEN_11_GENEN 0
+#define CONF_GCLK_GEN_11_GENEN 1
 #endif
 // </h>
 
@@ -910,7 +910,7 @@
 //<o> Generic clock generator 11 division <0x0000-0xFFFF>
 // <id> gclk_gen_11_div
 #ifndef CONF_GCLK_GEN_11_DIV
-#define CONF_GCLK_GEN_11_DIV 1
+#define CONF_GCLK_GEN_11_DIV 6
 #endif
 // </h>
 // </e>
diff --git a/sysmoOCTSIM/config/hpl_oscctrl_config.h b/sysmoOCTSIM/config/hpl_oscctrl_config.h
index 11e4a24..d59ac43 100644
--- a/sysmoOCTSIM/config/hpl_oscctrl_config.h
+++ b/sysmoOCTSIM/config/hpl_oscctrl_config.h
@@ -382,7 +382,7 @@
 // <i> Indicates whether configuration for FDPLL0 is enabled or not
 // <id> enable_fdpll0
 #ifndef CONF_FDPLL0_CONFIG
-#define CONF_FDPLL0_CONFIG 0
+#define CONF_FDPLL0_CONFIG 1
 #endif
 
 // <y> Reference Clock Source
@@ -404,7 +404,7 @@
 // <i> Select the clock source.
 // <id> fdpll0_ref_clock
 #ifndef CONF_FDPLL0_GCLK
-#define CONF_FDPLL0_GCLK GCLK_GENCTRL_SRC_XOSC32K
+#define CONF_FDPLL0_GCLK GCLK_PCHCTRL_GEN_GCLK11_Val
 #endif
 
 // <h> Digital Phase Locked Loop Control
@@ -412,7 +412,7 @@
 // <i> Indicates whether Digital Phase Locked Loop is enabled or not
 // <id> fdpll0_arch_enable
 #ifndef CONF_FDPLL0_ENABLE
-#define CONF_FDPLL0_ENABLE 0
+#define CONF_FDPLL0_ENABLE 1
 #endif
 
 // <q> On Demand Control
@@ -432,19 +432,19 @@
 // <o> Loop Divider Ratio Fractional Part <0x0-0x1F>
 // <id> fdpll0_ldrfrac
 #ifndef CONF_FDPLL0_LDRFRAC
-#define CONF_FDPLL0_LDRFRAC 0xd
+#define CONF_FDPLL0_LDRFRAC 0x0
 #endif
 
 // <o> Loop Divider Ratio Integer Part <0x0-0x1FFF>
 // <id> fdpll0_ldr
 #ifndef CONF_FDPLL0_LDR
-#define CONF_FDPLL0_LDR 0x5b7
+#define CONF_FDPLL0_LDR 0x3b
 #endif
 
 // <o> Clock Divider <0x0-0x7FF>
 // <id> fdpll0_clock_div
 #ifndef CONF_FDPLL0_DIV
-#define CONF_FDPLL0_DIV 0x0
+#define CONF_FDPLL0_DIV 0x6
 #endif
 
 // <q> DCO Filter Enable
@@ -485,7 +485,7 @@
 // <0x3=>XOSC1 clock reference
 // <id> fdpll0_arch_refclk
 #ifndef CONF_FDPLL0_REFCLK
-#define CONF_FDPLL0_REFCLK 0x1
+#define CONF_FDPLL0_REFCLK 0x3
 #endif
 
 // <q> Wake Up Fast
diff --git a/sysmoOCTSIM/config/peripheral_clk_config.h b/sysmoOCTSIM/config/peripheral_clk_config.h
index 9a9c30f..8078e4b 100644
--- a/sysmoOCTSIM/config/peripheral_clk_config.h
+++ b/sysmoOCTSIM/config/peripheral_clk_config.h
@@ -9,7 +9,7 @@
  * \brief CPU's Clock frequency
  */
 #ifndef CONF_CPU_FREQUENCY
-#define CONF_CPU_FREQUENCY 12000000
+#define CONF_CPU_FREQUENCY 120000000
 #endif
 
 // <y> USB Clock Source