add Ericsson OM2000 message sequence charts (one for each MO)
diff --git a/doc/manuals/om2000/om2k-mo-rx.msc b/doc/manuals/om2000/om2k-mo-rx.msc
new file mode 100644
index 0000000..4fe1365
--- /dev/null
+++ b/doc/manuals/om2000/om2k-mo-rx.msc
@@ -0,0 +1,31 @@
+msc {
+ bts [label="BTS"], bsc [label="BSC"];
+ # this is for the TRX Receiver Object
+ --- [label="Initial state after initializing TRXC"];
+
+ bts <= bsc [label="Connect Command"];
+ bts => bsc [label="Connect Complete"];
+
+ bts <= bsc [label="Reset Command"];
+ bts => bsc [label="Reset Complete"];
+
+ bts <= bsc [label="Start Request"];
+ bts => bsc [label="Start Request Accept"];
+ bts => bsc [label="Start Result (Disabled)"];
+ bts <= bsc [label="Start Result ACK"];
+
+ bts <= bsc [label="Start Request"];
+ bts => bsc [label="Reset Request Accept"];
+ bts => bsc [label="Start Result (Disabled)"];
+ bts <= bsc [label="Start Result ACK"];
+
+ bts <= bsc [label="RX Configuration Request"];
+ bts => bsc [label="RX Configuration Request Accept"];
+ bts => bsc [label="RX Configuration Result"];
+ bts <= bsc [label="RX Configuration Result ACK"];
+
+ bts <= bsc [label="Enable Request"];
+ bts => bsc [label="Enable Request Accept"];
+ bts => bsc [label="Enable Result (Enabled)"];
+ bts <= bsc [label="Enable Result ACK"];
+}