add Ericsson OM2000 message sequence charts (one for each MO)
diff --git a/doc/manuals/om2000/om2k-bts.msc b/doc/manuals/om2000/om2k-bts.msc
new file mode 100644
index 0000000..0c64398
--- /dev/null
+++ b/doc/manuals/om2000/om2k-bts.msc
@@ -0,0 +1,24 @@
+msc {
+ trxc [label="TRXC"], tf [label="TF"], is [label="IS"], cf [label="CF"], bsc [label="BSC"];
+ cf => bsc [label="Fault Report"];
+ cf <=> bsc [label="Start incl. Negotiation"];
+ cf <=> bsc [label="Operational Info"];
+
+ is <=> bsc [label="Connect"];
+ is <=> bsc [label="Reset"];
+ is <=> bsc [label="Start"];
+ is <=> bsc [label="Config"];
+ is <=> bsc [label="Enable"];
+ is <=> bsc [label="Operational Info"];
+
+ trxc <=> bsc [label="TRXC + dependent objects"];
+
+ cf <=> bsc [label="Calendar Time"];
+
+ tf <=> bsc [label="Conncet"];
+ tf <=> bsc [label="Reset"];
+ tf <=> bsc [label="Start"];
+ tf <=> bsc [label="Config"];
+ tf <=> bsc [label="Enable"];
+ tf <=> bsc [label="Operational Info"];
+}