manual: s/OsmoNITB/OsmoBSC/ in examples; remove E1 based BTSs
We still haven't re-introduced support for E1 based BTSs, so let's
remove the relevant chapters from the manuals. Also, make sure
we don't call anything OsmoNITB in this manual anymore.
Change-Id: I834d65836731958b6be823a18e35407183398715
diff --git a/doc/manuals/chapters/bts-examples.adoc b/doc/manuals/chapters/bts-examples.adoc
index b15fb99..e404989 100644
--- a/doc/manuals/chapters/bts-examples.adoc
+++ b/doc/manuals/chapters/bts-examples.adoc
@@ -1,109 +1,16 @@
[[bts-examples]]
-== OsmoNITB example configuration files
+== OsmoBSC example configuration files
-The `openbsc/doc/examples/osmo-nitb` directory in the OpenBSC source
+The `osmo-bsc/doc/examples/osmo-bsc` directory in the OpenBSC source
tree contains a collection of example configuration files, sorted by BTS
type.
This chapter is illustrating some excerpts from those examples
-[[bts_example_bs11]]
-=== Example configuration for OsmoNITB with one dual-TRX BS-11
-
-.OsmoNITB with BS11, 2 TRX, no frequency hopping
-====
-
-----
-e1_input
- e1_line 0 driver misdn
-network
- network country code 1
- mobile network code 1
- short name OpenBSC
- long name OpenBSC
- timer t3101 10
- timer t3113 60
- bts 0
- type bs11 <1>
- band GSM900
- cell_identity 1
- location_area_code 1
- training_sequence_code 7
- base_station_id_code 63
- oml e1 line 0 timeslot 1 sub-slot full <2>
- oml e1 tei 25 <3>
- trx 0
- arfcn 121
- max_power_red 0
- rsl e1 line 0 timeslot 1 sub-slot full <4>
- rsl e1 tei 1 <5>
- timeslot 0
- phys_chan_config CCCH+SDCCH4
- e1 line 0 timeslot 1 sub-slot full
- timeslot 1
- phys_chan_config TCH/F
- e1 line 0 timeslot 2 sub-slot 1 <6>
- timeslot 2
- phys_chan_config TCH/F
- e1 line 0 timeslot 2 sub-slot 2
- timeslot 3
- phys_chan_config TCH/F
- e1 line 0 timeslot 2 sub-slot 3
- timeslot 4
- phys_chan_config TCH/F
- e1 line 0 timeslot 3 sub-slot 0
- timeslot 5
- phys_chan_config TCH/F
- e1 line 0 timeslot 3 sub-slot 1
- timeslot 6
- phys_chan_config TCH/F
- e1 line 0 timeslot 3 sub-slot 2
- timeslot 7
- phys_chan_config TCH/F
- e1 line 0 timeslot 3 sub-slot 3
- trx 1
- arfcn 123
- max_power_red 0
- rsl e1 line 0 timeslot 1 sub-slot full <4>
- rsl e1 tei 2 <5>
- timeslot 0
- phys_chan_config TCH/F
- e1 line 0 timeslot 4 sub-slot 0 <6>
- timeslot 1
- phys_chan_config TCH/F
- e1 line 0 timeslot 4 sub-slot 1
- timeslot 2
- phys_chan_config TCH/F
- e1 line 0 timeslot 4 sub-slot 2
- timeslot 3
- phys_chan_config TCH/F
- e1 line 0 timeslot 4 sub-slot 3
- timeslot 4
- phys_chan_config TCH/F
- e1 line 0 timeslot 5 sub-slot 0
- timeslot 5
- phys_chan_config TCH/F
- e1 line 0 timeslot 5 sub-slot 1
- timeslot 6
- phys_chan_config TCH/F
- e1 line 0 timeslot 5 sub-slot 2
- timeslot 7
- phys_chan_config TCH/F
- e1 line 0 timeslot 5 sub-slot 3
-----
-====
-
-<1> The BTS type must be set to __bs11__
-<2> The OML E1 timeslot needs to be identical with what was on the BTS side using LMT.
-<3> The OML TEI value needs to be identical with what was configured on the BTS side using LMT.
-<4> The RSL E1 timeslot can be identical for all TRX.
-<5> The RSL TEI values __must__ be different if multiple TRX share one E1 signalling timeslot.
-<6> The TCH all need to be allocated one 16k sub-slot on the E1
-
[[bts_example_nbts]]
-=== Example configuration for OsmoNITB with one single-TRX nanoBTS
+=== Example configuration for OsmoBSC with one single-TRX nanoBTS
-.OsmoNITB with one single-TRX nanoBTS
+.OsmoBSC with one single-TRX nanoBTS
====
----
@@ -185,9 +92,9 @@
[[bts_example_nbts_multi]]
-=== Example configuration for OsmoNITB with multi-TRX nanoBTS
+=== Example configuration for OsmoBSC with multi-TRX nanoBTS
-.OsmoNITB configured for dual-TRX (stacked) nanoBTS
+.OsmoBSC configured for dual-TRX (stacked) nanoBTS
====
----