OsmoBSC> show nri
msc 0
 % no NRI mappings

OsmoBSC> enable
OsmoBSC# configure terminal

OsmoBSC(config)# msc 0

OsmoBSC(config-msc)# list
...
  nri add <0-32767> [<0-32767>]
  nri del <0-32767> [<0-32767>]
  show nri
...
OsmoBSC(config-msc)# nri ?
  add  Add NRI value or range to the NRI mapping for this MSC
  del  Remove NRI value or range from the NRI mapping for this MSC
OsmoBSC(config-msc)# nri add ?
  <0-32767>  First value of the NRI value range, should not surpass the configured 'nri bitlen'.
OsmoBSC(config-msc)# nri add 23 ?
  [<0-32767>]  Last value of the NRI value range, should not surpass the configured 'nri bitlen' and be larger than the first value; if omitted, apply only the first value.

OsmoBSC(config-msc)# nri add 23
OsmoBSC(config-msc)# nri add 256 511
OsmoBSC(config-msc)# nri add 100 200
OsmoBSC(config-msc)# nri add 1024 1024
% Warning: msc 0: Warning: NRI range surpasses current NRI bitlen: 1024..1024
OsmoBSC(config-msc)# show nri
msc 0
 nri add 23
 nri add 100 200
 nri add 256 511
 nri add 1024
OsmoBSC(config-msc)# exit

OsmoBSC(config)# ### Do msc 2 first, to see that the order of mscs in the internal list is not determined by the msc->nr,
OsmoBSC(config)# ### and whichever was configured first gets higher priority for overlaps.

OsmoBSC(config)# msc 2
OsmoBSC(config-msc)# nri add 200 300
% Warning: msc 2: NRI range [200..300] overlaps between msc 2 and msc 0. For overlaps, msc 0 has higher priority than msc 2
OsmoBSC(config-msc)# nri add 1024 1025
% Warning: msc 2: Warning: NRI range surpasses current NRI bitlen: 1024..1025
% Warning: msc 2: NRI range [1024..1025] overlaps between msc 2 and msc 0. For overlaps, msc 0 has higher priority than msc 2
OsmoBSC(config-msc)# exit

OsmoBSC(config)# msc 1
OsmoBSC(config-msc)# nri add 42
OsmoBSC(config-msc)# nri add 512 767
OsmoBSC(config-msc)# nri add 200 300
% Warning: msc 1: NRI range [200..300] overlaps between msc 1 and msc 0. For overlaps, msc 0 has higher priority than msc 1
% Warning: msc 1: NRI range [200..300] overlaps between msc 1 and msc 2. For overlaps, msc 2 has higher priority than msc 1
OsmoBSC(config-msc)# nri add 1024 1025
% Warning: msc 1: Warning: NRI range surpasses current NRI bitlen: 1024..1025
% Warning: msc 1: NRI range [1024..1025] overlaps between msc 1 and msc 0. For overlaps, msc 0 has higher priority than msc 1
% Warning: msc 1: NRI range [1024..1025] overlaps between msc 1 and msc 2. For overlaps, msc 2 has higher priority than msc 1
OsmoBSC(config-msc)# show nri
msc 1
 nri add 42
 nri add 200 300
 nri add 512 767
 nri add 1024 1025
OsmoBSC(config-msc)# exit

OsmoBSC(config)# do show nri
msc 0
 nri add 23
 nri add 100 200
 nri add 256 511
 nri add 1024
msc 2
 nri add 200 300
 nri add 1024 1025
msc 1
 nri add 42
 nri add 200 300
 nri add 512 767
 nri add 1024 1025

OsmoBSC(config)# network
OsmoBSC(config-net)# nri bitlen 11
OsmoBSC(config-net)# show running-config
...
network
...
 nri bitlen 11
...
msc 0
...
 nri add 23
 nri add 100 200
 nri add 256 511
 nri add 1024
...
msc 2
...
 nri add 200 300
 nri add 1024 1025
...
msc 1
...
 nri add 42
 nri add 200 300
 nri add 512 767
 nri add 1024 1025
...
OsmoBSC(config-net)# exit

OsmoBSC(config)# msc 0
OsmoBSC(config-msc)# nri del 0 10000
OsmoBSC(config-msc)# exit
OsmoBSC(config)# msc 1
OsmoBSC(config-msc)# nri del 0 10000
OsmoBSC(config-msc)# exit
OsmoBSC(config)# msc 2
OsmoBSC(config-msc)# nri del 0 10000
OsmoBSC(config-msc)# exit
OsmoBSC(config)# do show nri
msc 0
 % no NRI mappings
msc 2
 % no NRI mappings
msc 1
 % no NRI mappings

OsmoBSC(config)# msc 0
OsmoBSC(config-msc)# nri add 0 1000
OsmoBSC(config-msc)# show nri
msc 0
 nri add 0 1000
OsmoBSC(config-msc)# nri del 23
OsmoBSC(config-msc)# nri del 200 300
OsmoBSC(config-msc)# nri del 1000 2000
OsmoBSC(config-msc)# show nri
msc 0
 nri add 0 22
 nri add 24 199
 nri add 301 999
OsmoBSC(config-msc)# nri add 23
OsmoBSC(config-msc)# show nri
msc 0
 nri add 0 199
 nri add 301 999
OsmoBSC(config-msc)# nri add 200 300
OsmoBSC(config-msc)# show nri
msc 0
 nri add 0 999
OsmoBSC(config-msc)# nri add 1000
OsmoBSC(config-msc)# show nri
msc 0
 nri add 0 1000

OsmoBSC(config-msc)# show running-config
... ! no allow-attach
OsmoBSC(config-msc)# no allow-attach
OsmoBSC(config-msc)# show running-config
...
msc 0
...
 nri add 0 1000
 no allow-attach
... ! no allow-attach
OsmoBSC(config-msc)# allow-attach
OsmoBSC(config-msc)# show running-config
... ! no allow-attach