OsmoBSC> enable

OsmoBSC# show timer
net: T7 = 10 s	inter-BSC/MSC Handover outgoing, BSSMAP HO Required to HO Command timeout (default: 10 s)
net: T8 = 10 s	inter-BSC/MSC Handover outgoing, BSSMAP HO Command to final Clear timeout (default: 10 s)
net: T10 = 6 s	RR Assignment (default: 6 s)
net: T101 = 10 s	inter-BSC/MSC Handover incoming, BSSMAP HO Request to HO Accept (default: 10 s)
net: T3101 = 3 s	RR Immediate Assignment (default: 3 s)
net: T3103 = 5 s	Handover (default: 5 s)
net: T3105 = 100 ms	Physical Information (default: 100 ms)
net: T3107 = 5 s	(unused) (default: 5 s)
net: T3109 = 5 s	RSL SACCH deactivation (default: 5 s)
net: T3111 = 2 s	Wait time before RSL RF Channel Release (default: 2 s)
net: T3113 = 7 s	Paging (default: 7 s)
net: T3115 = 10 s	(unused) (default: 10 s)
net: T3117 = 10 s	(unused) (default: 10 s)
net: T3119 = 10 s	(unused) (default: 10 s)
net: T3122 = 10 s	Wait time after RR Immediate Assignment Reject (default: 10 s)
net: T3141 = 10 s	(unused) (default: 10 s)
net: T3212 = 5	Periodic Location Update timer, sent to MS (1 = 6 minutes) (default: 5)
net: X4 = 60 s	After Clear Request, wait for MSC to Clear Command (sanity) (default: 60 s)
net: X5 = 5 s	Timeout to switch dynamic timeslot PCHAN modes (default: 5 s)
net: X6 = 5 s	Timeout for RSL Channel Activate ACK after sending RSL Channel Activate (default: 5 s)
net: X7 = 5 s	Timeout for RSL IPA CRCX ACK after sending RSL IPA CRCX (default: 5 s)
net: X8 = 5 s	Timeout for RSL IPA MDCX ACK after sending RSL IPA MDCX (default: 5 s)
net: X9 = 5 s	Timeout for availability of MGW endpoint (default: 5 s)
net: X10 = 5 s	Timeout for fully configured MGW endpoint (default: 5 s)
net: X3111 = 4 s	Wait time after lchan was released in error (should be T3111 + 2s) (default: 4 s)
net: X3210 = 20 s	After L3 Complete, wait for MSC to confirm (default: 20 s)
mgw: X2427 = 5 s	timeout for MGCP response from MGW (default: 5 s)

OsmoBSC# show timer T3111
T3111 = 2 s	Wait time before RSL RF Channel Release (default: 2 s)

OsmoBSC# # specifically test legacy timers that are moved to X timers
OsmoBSC# show timer T993111
% Legacy: timer T993111 is now X3111
X3111 = 4 s	Wait time after lchan was released in error (should be T3111 + 2s) (default: 4 s)
OsmoBSC# show timer T993210
% Legacy: timer T993210 is now X3210
X3210 = 20 s	After L3 Complete, wait for MSC to confirm (default: 20 s)
OsmoBSC# show timer T999
% Legacy: timer T999 is now X4
X4 = 60 s	After Clear Request, wait for MSC to Clear Command (sanity) (default: 60 s)

OsmoBSC# configure terminal
OsmoBSC(config)# network
OsmoBSC(config-net)# timer
net: T7 = 10 s	inter-BSC/MSC Handover outgoing, BSSMAP HO Required to HO Command timeout (default: 10 s)
net: T8 = 10 s	inter-BSC/MSC Handover outgoing, BSSMAP HO Command to final Clear timeout (default: 10 s)
net: T10 = 6 s	RR Assignment (default: 6 s)
net: T101 = 10 s	inter-BSC/MSC Handover incoming, BSSMAP HO Request to HO Accept (default: 10 s)
net: T3101 = 3 s	RR Immediate Assignment (default: 3 s)
net: T3103 = 5 s	Handover (default: 5 s)
net: T3105 = 100 ms	Physical Information (default: 100 ms)
net: T3107 = 5 s	(unused) (default: 5 s)
net: T3109 = 5 s	RSL SACCH deactivation (default: 5 s)
net: T3111 = 2 s	Wait time before RSL RF Channel Release (default: 2 s)
net: T3113 = 7 s	Paging (default: 7 s)
net: T3115 = 10 s	(unused) (default: 10 s)
net: T3117 = 10 s	(unused) (default: 10 s)
net: T3119 = 10 s	(unused) (default: 10 s)
net: T3122 = 10 s	Wait time after RR Immediate Assignment Reject (default: 10 s)
net: T3141 = 10 s	(unused) (default: 10 s)
net: T3212 = 5	Periodic Location Update timer, sent to MS (1 = 6 minutes) (default: 5)
net: X4 = 60 s	After Clear Request, wait for MSC to Clear Command (sanity) (default: 60 s)
net: X5 = 5 s	Timeout to switch dynamic timeslot PCHAN modes (default: 5 s)
net: X6 = 5 s	Timeout for RSL Channel Activate ACK after sending RSL Channel Activate (default: 5 s)
net: X7 = 5 s	Timeout for RSL IPA CRCX ACK after sending RSL IPA CRCX (default: 5 s)
net: X8 = 5 s	Timeout for RSL IPA MDCX ACK after sending RSL IPA MDCX (default: 5 s)
net: X9 = 5 s	Timeout for availability of MGW endpoint (default: 5 s)
net: X10 = 5 s	Timeout for fully configured MGW endpoint (default: 5 s)
net: X3111 = 4 s	Wait time after lchan was released in error (should be T3111 + 2s) (default: 4 s)
net: X3210 = 20 s	After L3 Complete, wait for MSC to confirm (default: 20 s)
mgw: X2427 = 5 s	timeout for MGCP response from MGW (default: 5 s)

OsmoBSC(config-net)# # Using the legacy 'timer Txxx' still works:
OsmoBSC(config-net)# timer T3111
T3111 = 2 s	Wait time before RSL RF Channel Release (default: 2 s)
OsmoBSC(config-net)# timer T3111 23
OsmoBSC(config-net)# timer T3111
T3111 = 23 s	Wait time before RSL RF Channel Release (default: 2 s)
OsmoBSC(config-net)# timer T3111 default
OsmoBSC(config-net)# timer T3111
T3111 = 2 s	Wait time before RSL RF Channel Release (default: 2 s)

OsmoBSC(config-net)# # Using the new timer group commands also works:
OsmoBSC(config-net)# timer net T3111
net: T3111 = 2 s	Wait time before RSL RF Channel Release (default: 2 s)
OsmoBSC(config-net)# timer net T3111 42
OsmoBSC(config-net)# timer net T3111
net: T3111 = 42 s	Wait time before RSL RF Channel Release (default: 2 s)
OsmoBSC(config-net)# timer net T3111 default
OsmoBSC(config-net)# timer net T3111
net: T3111 = 2 s	Wait time before RSL RF Channel Release (default: 2 s)
OsmoBSC(config-net)# timer mgw
mgw: X2427 = 5 s	timeout for MGCP response from MGW (default: 5 s)
OsmoBSC(config-net)# timer mgw X2427
mgw: X2427 = 5 s	timeout for MGCP response from MGW (default: 5 s)
OsmoBSC(config-net)# timer mgw X2427 42
OsmoBSC(config-net)# timer mgw X2427
mgw: X2427 = 42 s	timeout for MGCP response from MGW (default: 5 s)
OsmoBSC(config-net)# timer mgw X2427 default
OsmoBSC(config-net)# timer mgw X2427
mgw: X2427 = 5 s	timeout for MGCP response from MGW (default: 5 s)

OsmoBSC(config-net)# # specifically test legacy timers that are moved to X timers
OsmoBSC(config-net)# timer T993111
% Legacy: timer T993111 is now X3111
X3111 = 4 s	Wait time after lchan was released in error (should be T3111 + 2s) (default: 4 s)
OsmoBSC(config-net)# timer T993111 1
% Legacy: timer T993111 is now X3111
OsmoBSC(config-net)# timer T993111
% Legacy: timer T993111 is now X3111
X3111 = 1 s	Wait time after lchan was released in error (should be T3111 + 2s) (default: 4 s)
OsmoBSC(config-net)# timer T993111 default
% Legacy: timer T993111 is now X3111
OsmoBSC(config-net)# timer T993111
% Legacy: timer T993111 is now X3111
X3111 = 4 s	Wait time after lchan was released in error (should be T3111 + 2s) (default: 4 s)

OsmoBSC(config-net)# timer T993210
% Legacy: timer T993210 is now X3210
X3210 = 20 s	After L3 Complete, wait for MSC to confirm (default: 20 s)
OsmoBSC(config-net)# timer T993210 2
% Legacy: timer T993210 is now X3210
OsmoBSC(config-net)# timer T993210
% Legacy: timer T993210 is now X3210
X3210 = 2 s	After L3 Complete, wait for MSC to confirm (default: 20 s)
OsmoBSC(config-net)# timer T993210 default
% Legacy: timer T993210 is now X3210
OsmoBSC(config-net)# timer T993210
% Legacy: timer T993210 is now X3210
X3210 = 20 s	After L3 Complete, wait for MSC to confirm (default: 20 s)

OsmoBSC(config-net)# timer T999
% Legacy: timer T999 is now X4
X4 = 60 s	After Clear Request, wait for MSC to Clear Command (sanity) (default: 60 s)
OsmoBSC(config-net)# timer T999 3
% Legacy: timer T999 is now X4
OsmoBSC(config-net)# timer T999
% Legacy: timer T999 is now X4
X4 = 3 s	After Clear Request, wait for MSC to Clear Command (sanity) (default: 60 s)
OsmoBSC(config-net)# timer T999 default
% Legacy: timer T999 is now X4
OsmoBSC(config-net)# timer T999
% Legacy: timer T999 is now X4
X4 = 60 s	After Clear Request, wait for MSC to Clear Command (sanity) (default: 60 s)