#!/bin/sh
### BEGIN INIT INFO
# Provides:          openggsn
# Required-Start:    $network $local_fs
# Required-Stop:
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Osmocom GSM network-in-a-box
# Description:       A minimal implementation of the GSM Base Station Controller,
#                    Mobile Switching Center, Home Location regster and all other
#                    components to run a self-contained GSM network.
### END INIT INFO

# Author: Harald Welte <laforge@gnumonks.org>

# PATH should only include /usr/* if it runs after the mountnfs.sh script
PATH=/sbin:/usr/sbin:/bin:/usr/bin
DESC="OpenGGSN Gateway GPRS Support Node"
NAME=openggsn
DAEMON=/usr/bin/ggsn
DAEMON_ARGS=""             # Arguments to run the daemon with
PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME
CONFIG_FILE=/etc/ggsn.conf

# Exit if the package is not installed
[ -x $DAEMON ] || exit 0

# Read configuration variable file if it is present
[ -r /etc/default/$NAME ] && . /etc/default/$NAME

# Load the VERBOSE setting and other rcS variables
# . /lib/init/vars.sh

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.0-6) to ensure that this file is present.
# . /lib/lsb/init-functions

DAEMON_ARGS="$DAEMON_ARGS -c $CONFIG_FILE"

#
# Function that starts the daemon/service
#
do_start()
{
	# Return
	#   0 if daemon has been started
	#   1 if daemon was already running
	#   2 if daemon could not be started
        /sbin/modprobe tun
	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
		|| return 1

	# Check for runtime directory of nonvolatile data
	if [ ! -d /var/lib/ggsn ]; then
		mkdir /var/lib/ggsn
	fi

	# Check for GTP restart counter
	if [ ! -f /var/lib/ggsn/gsn_restart ]; then
		echo 0 > /var/lib/ggsn/gsn_restart
	fi

	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
		$DAEMON_ARGS \
		|| return 2
	# Add code here, if necessary, that waits for the process to be ready
	# to handle requests from services started subsequently which depend
	# on this one.  As a last resort, sleep for some time.
}

#
# Function that stops the daemon/service
#
do_stop()
{
	# Return
	#   0 if daemon has been stopped
	#   1 if daemon was already stopped
	#   2 if daemon could not be stopped
	#   other if a failure occurred
	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
	RETVAL="$?"
	[ "$RETVAL" = 2 ] && return 2
	# Wait for children to finish too if this is a daemon that forks
	# and if the daemon is only ever run from this initscript.
	# If the above conditions are not satisfied then add some other code
	# that waits for the process to drop all resources that could be
	# needed by services started subsequently.  A last resort is to
	# sleep for some time.
	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
	[ "$?" = 2 ] && return 2
	# Many daemons don't delete their pidfiles when they exit.
	rm -f $PIDFILE
	return "$RETVAL"
}

#
# Function that sends a SIGHUP to the daemon/service
#
do_reload() {
	#
	# If the daemon can reload its configuration without
	# restarting (for example, when it is sent a SIGHUP),
	# then implement that here.
	#
	start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
	return 0
}

case "$1" in
  start)
    #[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC " "$NAME"
    do_start
    #case "$?" in
    #		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
    #		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
    #	esac
  ;;
  stop)
	#[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
	do_stop
	#case "$?" in
	#	0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
	#	2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
	#esac
	;;
  status)
       status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
       ;;
  #reload|force-reload)
	#
	# If do_reload() is not implemented then leave this commented out
	# and leave 'force-reload' as an alias for 'restart'.
	#
	#log_daemon_msg "Reloading $DESC" "$NAME"
	#do_reload
	#log_end_msg $?
	#;;
  restart|force-reload)
	#
	# If the "reload" option is implemented then remove the
	# 'force-reload' alias
	#
	#log_daemon_msg "Restarting $DESC" "$NAME"
	do_stop
	case "$?" in
	  0|1)
		do_start
		#case "$?" in
		#	0) log_end_msg 0 ;;
		#	1) log_end_msg 1 ;; # Old process is still running
		#	*) log_end_msg 1 ;; # Failed to start
		#esac
		;;
	  *)
	  	# Failed to stop
		#log_end_msg 1
		;;
	esac
	;;
  *)
	#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
	exit 3
	;;
esac

: