osmo_io: Massive improvement of API documentation
* introduce a new "Osmocom I/O interface" group to show up in API docs
* expand the documentation to turn it into something useful for somebody
wanting to write an application using it.
Change-Id: I6315cfc7ff34a0f8971517edf035e1efcef3ed5c
diff --git a/include/osmocom/core/osmo_io.h b/include/osmocom/core/osmo_io.h
index 8e613fa..8c931dd 100644
--- a/include/osmocom/core/osmo_io.h
+++ b/include/osmocom/core/osmo_io.h
@@ -12,44 +12,107 @@
#include <osmocom/core/socket.h>
#include <osmocom/core/utils.h>
+/*! \defgroup osmo_io Osmocom I/O interface
+ * @{
+ *
+ * osmo_io is the new (2023) interface for performing asynchronous I/O.
+ * osmo_io encapsulates asynchronous, non-blocking I/O to sockets or other file descriptors
+ * with a submission/completion model.
+ *
+ * For writes, the API user submits write requests, and receives
+ * completion call-backs once the write completes.
+ *
+ * For reads, the API user specifies the size (and headroom) for message buffers, and osmo_io
+ * internally allocates msgb's accordingly. Whenever data arrives at the socket/file descriptor,
+ * osmo_io reads the data into such a msgb and hands it to a read-completion call-back provided
+ * by the API user.
+ *
+ * A given socket/file descriptor is represented by struct osmo_io_fd. osmo_io_fd are named,
+ * i.e. the API user can provide a meaningful name describing the purpose (such as protocol/interface or the
+ * name of the remote peer). This allows osmo_io to log any related [error] messages using this name as
+ * context.
+ *
+ * When implementing some SOCK_STREAM / SOCK_SEQPACKET based client/server transports (such as those on top
+ * of TCP or SCTP), you are most likely better off using the osmo_stream_cli / osmo_stream_srv abstractions
+ * provided by libosmo-netif. They in turn can be used in an osmo_io mode, see the respective documentation.
+ *
+ * If you use osmo_io_fd directly, the life-cycle usually will look as follows:
+ *
+ * 1. open some socket and bind and/or connect it
+ * 2. Allocate an osmo_io_fd using osmo_iofd_setup(), configuring the mode and specifying the call-backs
+ * 3. Registering it with osmo_iofd_register(), which enables reading
+ * 4. Handle inbound data via {read,recvfrom,recvmsg} call-backs; write to it using
+ * osmo_iofd_{write,sendto_sendmsg}_msg()
+ * 5. Eventually un-register it using osmo_iofd_unregister(). Afterwards, you can re-cycle the iofd by
+ * calling osmo_iofd_register() with a new file-descriptor, or free it using osmo_iofd_free().
+ *
+ * \file osmo_io.h */
+/*! log macro used for logging information related to the osmo_io_fd.
+ * \param[in] iofd osmo_io_fd about which we're logging
+ * \param[in] level log-level (LOGL_DEBUG, LOGL_INFO, LOGL_NOTICE, LOGL_ERROR, LOGL_FATAL)
+ * \param[in] fmt printf-style format string
+ * \param[in] args arguments to the format string
+ */
#define LOGPIO(iofd, level, fmt, args...) \
LOGP(DLIO, level, "iofd(%s)" fmt, iofd->name, ## args)
struct osmo_io_fd;
+/*! The _mode_ of an osmo_io_fd determines if read/write, recvfrom/sendmsg or recvmsg/sendmsg semantics are
+ * used. */
enum osmo_io_fd_mode {
- /*! use read() / write() calls */
+ /*! use read() / write() semantics with read_cb/write_cb in osmo_io_ops */
OSMO_IO_FD_MODE_READ_WRITE,
- /*! use recvfrom() / sendto() calls */
+ /*! use recvfrom() / sendto() semantics with recvfrom_cb/sendto_cb in osmo_io_ops */
OSMO_IO_FD_MODE_RECVFROM_SENDTO,
- /*! emulate recvmsg() / sendmsg() */
+ /*! emulate recvmsg() / sendmsg() semantics with recvmsg_cb/sendto_cb in osmo_io_ops */
OSMO_IO_FD_MODE_RECVMSG_SENDMSG,
};
+/*! The back-end used by osmo_io. There can be multiple different back-ends available on a given system;
+ * only one of it is used for all I/O performed via osmo_io in one given process. */
enum osmo_io_backend {
+ /*! classic back-end using poll(2) and direct read/write/recvfrom/sendto/recvmsg/sendmsg syscalls */
OSMO_IO_BACKEND_POLL,
+ /*! back-end using io_uring to perform efficient I/O and reduce syscall overhead */
OSMO_IO_BACKEND_IO_URING,
};
extern const struct value_string osmo_io_backend_names[];
+/*! return the string name of an osmo_io_backend */
static inline const char *osmo_io_backend_name(enum osmo_io_backend val)
{ return get_value_string(osmo_io_backend_names, val); }
extern const struct value_string osmo_iofd_mode_names[];
+/*! return the string name of an osmo_io_mode */
static inline const char *osmo_iofd_mode_name(enum osmo_io_fd_mode val)
{ return get_value_string(osmo_iofd_mode_names, val); }
+/*! I/O operations (call-back functions) related to an osmo_io_fd */
struct osmo_io_ops {
/* mode OSMO_IO_FD_MODE_READ_WRITE: */
struct {
- /*! call-back function when something was read from fd */
+ /*! completion call-back function when something was read from fd. Only valid in
+ * OSMO_IO_FD_MODE_READ_WRITE.
+ * \param[in] iofd osmo_io_fd for which read() has completed.
+ * \param[in] res return value of the read() call, or -errno in case of error.
+ * \param[in] msg message buffer containing the read data. Ownership is transferred to the
+ * call-back, and it must make sure to msgb_free() it eventually! */
void (*read_cb)(struct osmo_io_fd *iofd, int res, struct msgb *msg);
- /*! call-back function when write has completed on fd */
+ /*! completion call-back function when write issued via osmo_iofd_write_msgb() has completed
+ * on fd. Only valid in OSMO_IO_FD_MODE_READ_WRITE.
+ * \param[in] iofd on which a write() has completed.
+ * \param[in] res return value of the write() call, or -errno in case of error.
+ * \param[in] msg message buffer whose write has completed. Ownership is *not* transferred to the
+ * call-back; it is automatically freed after the call-back terminates! */
void (*write_cb)(struct osmo_io_fd *iofd, int res,
struct msgb *msg);
- /*! call-back function to segment the data at message boundaries.
- * Needs to return the size of the next message. If it returns
+ /*! optional call-back function to segment the data at message boundaries. This is useful when
+ * message boundaries are to be preserved over a SOCK_STREAM transport socket like TCP. Can
+ * be NULL for any application not requiring de-segmentation of received data.
+ *
+ * The call-back needs to return the size of the next message. If it returns
* -EAGAIN or a value larger than msgb_length() (message is incomplete)
* osmo_io will wait for more data to be read. Other negative values
* cause the msg to be discarded.
@@ -62,11 +125,23 @@
/* mode OSMO_IO_FD_MODE_RECVFROM_SENDTO: */
struct {
- /*! call-back function emulating recvfrom */
+ /*! completion call-back function when recvfrom(2) has completed.
+ * Only valid in OSMO_IO_FD_MODE_RECVFROM_SENDTO.
+ * \param[in] iofd osmo_io_fd for which recvfrom() has completed.
+ * \param[in] res return value of the recvfrom() call, or -errno in case of error.
+ * \param[in] msg message buffer containing the read data. Ownership is transferred to the
+ * call-back, and it must make sure to msgb_free() it eventually!
+ * \param[in] saddr socket-address of sender from which data was received. */
void (*recvfrom_cb)(struct osmo_io_fd *iofd, int res,
struct msgb *msg,
const struct osmo_sockaddr *saddr);
- /*! call-back function emulating sendto */
+ /*! completion call-back function when sendto() issued via osmo_iofd_sendto_msgb() has
+ * completed on fd. Only valid in OSMO_IO_FD_MODE_RECVFROM_SENDTO.
+ * \param[in] iofd on which a sendto() has completed.
+ * \param[in] res return value of the sendto() call, or -errno in case of error.
+ * \param[in] msg message buffer whose write has completed. Ownership is *not* transferred to the
+ * call-back; it is automatically freed after the call-back terminates!
+ * \param[in] daddr socket-address of destination to which data was sent. */
void (*sendto_cb)(struct osmo_io_fd *iofd, int res,
struct msgb *msg,
const struct osmo_sockaddr *daddr);
@@ -74,8 +149,22 @@
/* mode OSMO_IO_FD_MODE_RECVMSG_SENDMSG: */
struct {
+ /*! completion call-back function when recvmsg(2) has completed.
+ * Only valid in OSMO_IO_FD_MODE_RECVMSG_SENDMSG.
+ * \param[in] iofd osmo_io_fd for which recvmsg() has completed.
+ * \param[in] res return value of the recvmsg() call, or -errno in case of error.
+ * \param[in] msg message buffer containing the read data. Ownership is transferred to the
+ * call-back, and it must make sure to msgb_free() it eventually!
+ * \param[in] msgh msghdr containing metadata related to the recvmsg call. Only valid until
+ * call-back ends. */
void (*recvmsg_cb)(struct osmo_io_fd *iofd, int res,
struct msgb *msg, const struct msghdr *msgh);
+ /*! completion call-back function when sendmsg() issued via osmo_iofd_sendmsg_msgb() has
+ * completed on fd. Only valid in Only valid in OSMO_IO_FD_MODE_RECVMSG_SENDMSG.
+ * \param[in] iofd on which a sendmsg() has completed.
+ * \param[in] res return value of the sendmsg() call, or -errno in case of error.
+ * \param[in] msg message buffer whose write has completed. Ownership is *not* transferred to the
+ * call-back; it is automatically freed after the call-back terminates! */
void (*sendmsg_cb)(struct osmo_io_fd *iofd, int res, struct msgb *msg);
};
};
@@ -114,3 +203,5 @@
int osmo_iofd_set_ioops(struct osmo_io_fd *iofd, const struct osmo_io_ops *ioops);
void osmo_iofd_get_ioops(struct osmo_io_fd *iofd, struct osmo_io_ops *ioops);
+
+/*! @} */
diff --git a/src/core/osmo_io.c b/src/core/osmo_io.c
index 745d783..83b67b5 100644
--- a/src/core/osmo_io.c
+++ b/src/core/osmo_io.c
@@ -1,4 +1,4 @@
-/*! \file osmo_io.c
+/*
* New osmocom async I/O API.
*
* (C) 2022-2024 by Harald Welte <laforge@osmocom.org>
@@ -42,6 +42,11 @@
#include "osmo_io_internal.h"
+/*! \addtogroup osmo_io
+ * @{
+ *
+ * \file osmo_io.c */
+
/*! This environment variable can be set to manually set the backend used in osmo_io */
#define OSMO_IO_BACKEND_ENV "LIBOSMO_IO_BACKEND"
@@ -341,7 +346,7 @@
iofd->pending = pending;
}
-/*! completion handler: Called by osmo_io backend after a given I/O operation has completed
+/*! completion handler: Internal function called by osmo_io_backend after a given I/O operation has completed
* \param[in] iofd I/O file-descriptor on which I/O has completed
* \param[in] msg message buffer containing data related to completed I/O
* \param[in] rc result code with read size or error (-errno)
@@ -365,7 +370,7 @@
}
}
-/*! completion handler: Calld by osmo_io backend after a given I/O operation has completed
+/*! completion handler: Internal function called by osmo_io_backend after a given I/O operation has completed
* \param[in] iofd I/O file-descriptor on which I/O has completed
* \param[in] rc return value of the I/O operation
* \param[in] msghdr serialized msghdr containing state of completed I/O
@@ -410,14 +415,18 @@
/* Public functions */
-/*! Send a message through a connected socket.
+/*! Write a message to a file descriptor / connected socket.
+ * The osmo_io_fd must be using OSMO_IO_FD_MODE_READ_WRITE.
*
- * Appends the message to the internal transmit queue.
+ * Appends the message to the internal transmit queue for eventual non-blocking
+ * write to the underlying socket/file descriptor.
+ *
* If the function returns success (0) it will take ownership of the msgb and
* internally call msgb_free() after the write request completes.
- * In case of an error the msgb needs to be freed by the caller.
- * \param[in] iofd file descriptor to write to
- * \param[in] msg message buffer to write
+ * In case of an error, the msgb needs to be freed by the caller.
+ *
+ * \param[in] iofd osmo_io_fd file descriptor to write data to
+ * \param[in] msg message buffer containing the data to write
* \returns 0 in case of success; a negative value in case of error
*/
int osmo_iofd_write_msgb(struct osmo_io_fd *iofd, struct msgb *msg)
@@ -456,11 +465,15 @@
}
/*! Send a message through an unconnected socket.
+ * The osmo_io_fd must be using OSMO_IO_FD_MODE_RECVFROM_SENDTO.
*
- * Appends the message to the internal transmit queue.
+ * Appends the message to the internal transmit queue for eventual non-blocking
+ * sendto on the underlying socket/file descriptor.
+ *
* If the function returns success (0), it will take ownership of the msgb and
- * internally call msgb_free() after the write request completes.
+ * internally call msgb_free() after the sendto request completes.
* In case of an error the msgb needs to be freed by the caller.
+ *
* \param[in] iofd file descriptor to write to
* \param[in] msg message buffer to send
* \param[in] sendto_flags Flags to pass to the send call
@@ -507,12 +520,16 @@
return 0;
}
-/*! ismo_io equivalent of the sendmsg(2) socket API call
+/*! osmo_io equivalent of the sendmsg(2) socket API call.
+ * The osmo_io_fd must be using OSMO_IO_FD_MODE_RECVMSG_SENDMSG.
*
- * Appends the message to the internal transmit queue.
+ * Appends the message to the internal transmit queue for eventual non-blocking
+ * sendmsg on the underlying socket/file descriptor.
+ *
* If the function returns success (0), it will take ownership of the msgb and
- * internally call msgb_free() after the write request completes.
+ * internally call msgb_free() after the sendmsg request completes.
* In case of an error the msgb needs to be freed by the caller.
+ *
* \param[in] iofd file descriptor to write to
* \param[in] msg message buffer to send; is used to fill msgh->iov[]
* \param[in] sendmsg_flags Flags to pass to the send call
@@ -612,12 +629,31 @@
}
/*! Allocate and setup a new iofd.
+ *
+ * Use this to create a new osmo_io_fd, specifying the osmo_io_fd_mode and osmo_io_ops, as well as optionally
+ * the file-descriptor number and a human-readable name. This is the first function you call for any
+ * osmo_io_fd.
+ *
+ * The created osmo_io_fd is not yet registered, and hence can not be used for any I/O until a subsequent
+ * call to osmo_iofd_register().
+ *
+ * The created osmo_io_fd is initialized with some default settings:
+ * * msgb allocations size: OSMO_IO_DEFAULT_MSGB_SIZE (1024)
+ * * msgb headroom: OSMO_IO_DEFAULT_MSGB_HEADROOM (128)
+ * * tx_queue depth: 32
+ *
+ * Those values may be adjusted from their defaults by using osmo_iofd_set_alloc_info() and
+ * osmo_iofd_set_txqueue_max_length() on the osmo_io_fd.
+ *
* \param[in] ctx the parent context from which to allocate
- * \param[in] fd the underlying system file descriptor
- * \param[in] name the name of the iofd
- * \param[in] mode the mode of the iofd, whether it should use read()/write(), sendto()/recvfrom()
- * \param[in] ioops structure with read/write/send/recv callbacks
- * \param[in] data user data pointer accessible by the ioops callbacks
+ * \param[in] fd the underlying system file descriptor. May be -1 if not known yet; must then be specified
+ * at subsequent osmo_iofd_register() time.
+ * \param[in] name the optional human-readable name of the iofd; may be NULL
+ * \param[in] mode the osmo_io_fd_mode of the iofd, whether it should use read()/write(), sendto()/recvfrom()
+ * semantics.
+ * \param[in] ioops structure specifying the read/write/send/recv callbacks. Will be copied to the iofd, so
+ * the caller does not have to keep it around after issuing the osmo_iofd_setup call.
+ * \param[in] data opaque user data pointer accessible by the ioops callbacks
* \returns The newly allocated osmo_io_fd struct or NULL on failure
*/
struct osmo_io_fd *osmo_iofd_setup(const void *ctx, int fd, const char *name, enum osmo_io_fd_mode mode,
@@ -669,7 +705,11 @@
return iofd;
}
-/*! Set the size of the control message buffer allocated when submitting recvmsg */
+/*! Set the size of the control message buffer allocated when submitting recvmsg.
+ *
+ * If your osmo_io_fd is in OSMO_IO_FD_MODE_RECVMSG_SENDMSG mode, this API function can be used to tell the
+ * osmo_io code how much memory should be allocated for the cmsg (control message) buffer when performing
+ * recvmsg(). */
int osmo_iofd_set_cmsg_size(struct osmo_io_fd *iofd, size_t cmsg_size)
{
if (iofd->mode != OSMO_IO_FD_MODE_RECVMSG_SENDMSG)
@@ -679,10 +719,20 @@
return 0;
}
-/*! Register the fd with the underlying backend.
+/*! Register the osmo_io_fd for active I/O.
+ *
+ * Calling this function will register a previously initialized osmo_io_fd for performing I/O.
+ *
+ * If the osmo_iofd has a read_cb/recvfrom_cb_recvmsg_cb set in its osmo_io_ops, read/receive will be
+ * automatically enabled and the respective call-back is called at any time data becomes available.
+ *
+ * If there is to-be-transmitted data in the transmit queue, write will be automatically enabled, allowing
+ * the transmit queue to be drained as soon as the fd/socket becomes writable.
*
* \param[in] iofd the iofd file descriptor
- * \param[in] fd the system fd number that will be registeres. If negative will use the one already set.
+ * \param[in] fd the system fd number that will be registered. If you did not yet specify the file descriptor
+ * number during osmo_fd_setup(), or if it has changed since then, you can state the [new] file descriptor
+ * number as argument. If you wish to proceed with the previously specified file descriptor number, pass -1.
* \returns zero on success, a negative value on error
*/
int osmo_iofd_register(struct osmo_io_fd *iofd, int fd)
@@ -714,7 +764,10 @@
return rc;
}
-/*! Unregister the fd from the underlying backend.
+/*! Unregister the given osmo_io_fd from osmo_io.
+ *
+ * After an osmo_io_fd has been successfully unregistered, it can no longer perform any I/O via osmo_io.
+ * However, it can be subsequently re-registered using osmo_iofd_register().
*
* \param[in] iofd the file descriptor
* \returns zero on success, a negative value on error
@@ -724,7 +777,7 @@
return osmo_iofd_ops.unregister_fd(iofd);
}
-/*! Get the number of messages in the tx queue.
+/*! Retrieve the number of messages pending in the transmit queue.
*
* \param[in] iofd the file descriptor
*/
@@ -733,7 +786,7 @@
return iofd->tx_queue.current_length;
}
-/*! Clear the transmit queue of the the iofd.
+/*! Clear the transmit queue of the given osmo_io_fd.
*
* This function frees all messages currently pending in the transmit queue
* \param[in] iofd the file descriptor
@@ -747,10 +800,13 @@
}
}
-/*! Free the iofd.
+/*! Free the given osmo_io_fd.
*
- * This function is safe to use in the read/write callbacks and will defer freeing it until safe to do so.
- * The iofd will be closed before.
+ * The iofd will be automatically closed before via osmo_iofd_close() [which in turn will unregister
+ * it and clear any pending transmit queue items]. You must not reference the iofd
+ * after calling this function. However, it is safe to call this function from any of osmo_io
+ * call-backs; in this case, actual free will be internally delayed until that call-back completes.
+ *
* \param[in] iofd the file descriptor
*/
void osmo_iofd_free(struct osmo_io_fd *iofd)
@@ -769,12 +825,12 @@
}
}
-/*! Close the iofd.
+/*! Close the given osmo_io_fd.
*
- * This function closes the underlying fd and clears any messages in the tx queue
- * The iofd is not freed and can be assigned a new file descriptor with osmo_iofd_register()
+ * This function closes the underlying fd, unregisters it from osmo_io and clears any messages in the tx
+ * queue. The iofd itself is not freed and can be assigned a new file descriptor with osmo_iofd_register()
* \param[in] iofd the file descriptor
- * \ returns 0 on success, a negative value otherwise
+ * \returns 0 on success, a negative value otherwise
*/
int osmo_iofd_close(struct osmo_io_fd *iofd)
{
@@ -816,7 +872,11 @@
iofd->tx_queue.max_length = max_length;
}
-/*! Get the associated user-data from an iofd.
+/*! Retrieve the associated user-data from an osmo_io_fd.
+ *
+ * A call to this function will return the opaque user data pointer which was specified previously
+ * via osmo_iofd_setup() or via osmo_iofd_set_data().
+ *
* \param[in] iofd the file descriptor
* \returns the data that was previously set with \ref osmo_iofd_setup()
*/
@@ -825,7 +885,11 @@
return iofd->data;
}
-/*! Set the associated user-data from an iofd.
+/*! Set the associated user-data from an osmo_io_fd.
+ *
+ * Calling this function will set/overwrite the opaque user data pointer, which can later be retrieved using
+ * osmo_iofd_get_data().
+ *
* \param[in] iofd the file descriptor
* \param[in] data the data to set
*/
@@ -834,7 +898,8 @@
iofd->data = data;
}
-/*! Get the private number from an iofd.
+/*! Retrieve the private number from an osmo_io_fd.
+ * Calling this function will retrieve the private user number previously set via osmo_iofd_set_priv_nr().
* \param[in] iofd the file descriptor
* \returns the private number that was previously set with \ref osmo_iofd_set_priv_nr()
*/
@@ -843,7 +908,9 @@
return iofd->priv_nr;
}
-/*! Set the private number from an iofd.
+/*! Set the private number of an osmo_io_fd.
+ * The priv_nr passed in via this call can later be retrieved via osmo_iofd_get_priv_nr(). It provides
+ * a way how additional context can be stored in the osmo_io_fd beyond the opaque 'data' pointer.
* \param[in] iofd the file descriptor
* \param[in] priv_nr the private number to set
*/
@@ -852,7 +919,7 @@
iofd->priv_nr = priv_nr;
}
-/*! Get the underlying file descriptor from an iofd.
+/*! Retrieve the underlying file descriptor from an osmo_io_fd.
* \param[in] iofd the file descriptor
* \returns the underlying file descriptor number */
int osmo_iofd_get_fd(const struct osmo_io_fd *iofd)
@@ -860,7 +927,7 @@
return iofd->fd;
}
-/*! Get the name of the file descriptor.
+/*! Retrieve the human-readable name of the given osmo_io_fd.
* \param[in] iofd the file descriptor
* \returns the name of the iofd as given in \ref osmo_iofd_setup() */
const char *osmo_iofd_get_name(const struct osmo_io_fd *iofd)
@@ -868,7 +935,8 @@
return iofd->name;
}
-/*! Set the name of the file descriptor.
+/*! Set the human-readable name of the file descriptor.
+ * The given name will be used as context by all related logging and future calls to osmo_iofd_get_name().
* \param[in] iofd the file descriptor
* \param[in] name the name to set on the file descriptor */
void osmo_iofd_set_name(struct osmo_io_fd *iofd, const char *name)
@@ -876,9 +944,13 @@
osmo_talloc_replace_string(iofd, &iofd->name, name);
}
-/*! Set the osmo_io_ops for an iofd.
+/*! Set the osmo_io_ops calbacks for an osmo_io_fd.
+ * This function can be used to update/overwrite the call-back functions for the given osmo_io_fd; it
+ * replaces the currently-set call-back function pointers from a previous call to osmo_iofd_set_ioops()
+ * or the original osmo_iofd_setup().
* \param[in] iofd Target iofd file descriptor
- * \param[in] ioops osmo_io_ops structure to be set */
+ * \param[in] ioops osmo_io_ops structure to be copied to the osmo_io_fd.
+ * \returns 0 on success, negative on error */
int osmo_iofd_set_ioops(struct osmo_io_fd *iofd, const struct osmo_io_ops *ioops)
{
if (!check_mode_callback_compat(iofd->mode, ioops)) {
@@ -915,7 +987,7 @@
return 0;
}
-/*! Get the osmo_io_ops for an iofd.
+/*! Retrieve the osmo_io_ops for an iofd.
* \param[in] iofd Target iofd file descriptor
* \param[in] ioops caller-allocated osmo_io_ops structure to be filled */
void osmo_iofd_get_ioops(struct osmo_io_fd *iofd, struct osmo_io_ops *ioops)
@@ -923,8 +995,14 @@
*ioops = iofd->io_ops;
}
-/*! Notify the user if/when the socket is connected.
- * When the socket is connected the write_cb will be called.
+/*! Request notification of the user if/when a client socket is connected.
+ * Calling this function will request osmo_io to notify the user (via
+ * write call-back) once a non-blocking outbound connect() of the
+ * socket completes.
+ *
+ * This only works for connection oriented sockets in either
+ * OSMO_IO_FD_MODE_READ_WRITE or OSMO_IO_FD_MODE_RECVMSG_SENDMSG mode.
+ *
* \param[in] iofd the file descriptor */
void osmo_iofd_notify_connected(struct osmo_io_fd *iofd)
{
@@ -933,5 +1011,6 @@
osmo_iofd_ops.notify_connected(iofd);
}
+/*! @} */
#endif /* ifndef(EMBEDDED) */