gprs_ns2_vty: dump_nsvc: change output depending on NSVCI
If the NSVCI is valid, there is no signalling or data weight defined (internally this is 1).
For NSVC with NSVCI don't print the signalling or data weight.
For NSVC without NSVCI, don't print NSVCI at all.
Related: OS#5180
Change-Id: Iaadc806a9136436468e2b02eb0bc1f4570a10ecc
diff --git a/tests/gb/gprs_ns2_vty.vty b/tests/gb/gprs_ns2_vty.vty
index 458e2c8..45c8a16 100644
--- a/tests/gb/gprs_ns2_vty.vty
+++ b/tests/gb/gprs_ns2_vty.vty
@@ -40,11 +40,11 @@
OsmoNSdummy# show ns
NSEI 01234: UDP, DEAD
1 NS-VC:
- NSVCI none: RECOVERING PERSIST data_weight=1 sig_weight=1 udp)[127.0.0.14]:42999<>[127.0.0.15]:9496
+ RECOVERING PERSIST sig_weight=1 data_weight=1 udp)[127.0.0.14]:42999<>[127.0.0.15]:9496
UDP bind: 127.0.0.14:42999 DSCP: 0 Priority: 0
IP-SNS signalling weight: 1 data weight: 1
1 NS-VC:
- NSVCI none: RECOVERING PERSIST data_weight=1 sig_weight=1 udp)[127.0.0.14]:42999<>[127.0.0.15]:9496
+ RECOVERING PERSIST sig_weight=1 data_weight=1 udp)[127.0.0.14]:42999<>[127.0.0.15]:9496
OsmoNSdummy# configure terminal
OsmoNSdummy(config)# ns
OsmoNSdummy(config-ns)# nse 1234
@@ -54,15 +54,15 @@
OsmoNSdummy# show ns
NSEI 01234: UDP, DEAD
3 NS-VC:
- NSVCI none: RECOVERING PERSIST data_weight=1 sig_weight=1 udp)[127.0.0.14]:42999<>[127.0.0.15]:9496
- NSVCI none: RECOVERING PERSIST data_weight=9 sig_weight=0 udp)[127.0.0.14]:42999<>[127.0.0.16]:9496
- NSVCI none: RECOVERING PERSIST data_weight=0 sig_weight=0 udp)[127.0.0.14]:42999<>[127.0.0.17]:9496
+ RECOVERING PERSIST sig_weight=1 data_weight=1 udp)[127.0.0.14]:42999<>[127.0.0.15]:9496
+ RECOVERING PERSIST sig_weight=0 data_weight=9 udp)[127.0.0.14]:42999<>[127.0.0.16]:9496
+ RECOVERING PERSIST sig_weight=0 data_weight=0 udp)[127.0.0.14]:42999<>[127.0.0.17]:9496
UDP bind: 127.0.0.14:42999 DSCP: 0 Priority: 0
IP-SNS signalling weight: 1 data weight: 1
3 NS-VC:
- NSVCI none: RECOVERING PERSIST data_weight=1 sig_weight=1 udp)[127.0.0.14]:42999<>[127.0.0.15]:9496
- NSVCI none: RECOVERING PERSIST data_weight=9 sig_weight=0 udp)[127.0.0.14]:42999<>[127.0.0.16]:9496
- NSVCI none: RECOVERING PERSIST data_weight=0 sig_weight=0 udp)[127.0.0.14]:42999<>[127.0.0.17]:9496
+ RECOVERING PERSIST sig_weight=1 data_weight=1 udp)[127.0.0.14]:42999<>[127.0.0.15]:9496
+ RECOVERING PERSIST sig_weight=0 data_weight=9 udp)[127.0.0.14]:42999<>[127.0.0.16]:9496
+ RECOVERING PERSIST sig_weight=0 data_weight=0 udp)[127.0.0.14]:42999<>[127.0.0.17]:9496
OsmoNSdummy# configure terminal
OsmoNSdummy(config)# ns
OsmoNSdummy(config-ns)# nse 1234