trx: Added missing timeslot filter
diff --git a/python/trx/radio_if_grc.py b/python/trx/radio_if_grc.py
index 26c1f22..8b53fe7 100755
--- a/python/trx/radio_if_grc.py
+++ b/python/trx/radio_if_grc.py
@@ -5,7 +5,7 @@
# Title: Trx radio interface
# Author: (C) Piotr Krysik 2017
# Description: Alpha version of trx radio interface
-# Generated: Thu Nov 30 12:45:52 2017
+# Generated: Thu Nov 30 13:02:31 2017
##################################################
from gnuradio import blocks
@@ -25,24 +25,24 @@
class radio_if_grc(gr.top_block):
- def __init__(self, delay_correction=285.616e-6, osr=4, ppm=-1, rx_freq=938600000, rx_gain=40, samp_rate=13e6/12.0, timing_advance=0, trx_base_port="5700", trx_remote_addr="127.0.0.1", tx_freq=938900000, tx_gain=30, uplink_shift=-(6.0/1625000*(156.25)*3)):
+ def __init__(self, samp_rate=13e6/12.0, tx_gain=30, tx_freq=938900000, rx_freq=938600000, rx_gain=40, osr=4, ppm=-1, trx_base_port="5700", trx_remote_addr="127.0.0.1", delay_correction=285.616e-6, uplink_shift=-(6.0/1625000*(156.25)*3), timing_advance=0):
gr.top_block.__init__(self, "Trx radio interface")
##################################################
# Parameters
##################################################
- self.delay_correction = delay_correction
- self.osr = osr
- self.ppm = ppm
+ self.samp_rate = samp_rate
+ self.tx_gain = tx_gain
+ self.tx_freq = tx_freq
self.rx_freq = rx_freq
self.rx_gain = rx_gain
- self.samp_rate = samp_rate
- self.timing_advance = timing_advance
+ self.osr = osr
+ self.ppm = ppm
self.trx_base_port = trx_base_port
self.trx_remote_addr = trx_remote_addr
- self.tx_freq = tx_freq
- self.tx_gain = tx_gain
+ self.delay_correction = delay_correction
self.uplink_shift = uplink_shift
+ self.timing_advance = timing_advance
##################################################
# Blocks
@@ -73,6 +73,7 @@
self.uhd_usrp_sink_0.set_center_freq(tx_freq, 0)
self.uhd_usrp_sink_0.set_gain(tx_gain, 0)
self.uhd_usrp_sink_0.set_antenna("TX/RX", 0)
+ self.ts_filter = grgsm.burst_timeslot_filter(0)
self.low_pass_filter_0_0 = filter.fir_filter_ccf(1, firdes.low_pass(
1, samp_rate, 125e3, 5e3, firdes.WIN_HAMMING, 6.76))
self.gsm_txtime_setter_0 = grgsm.txtime_setter(None if (None is not None) else 0xffffffff, 0, 0, 0, 0, timing_advance, delay_correction+uplink_shift)
@@ -86,23 +87,31 @@
pulse_duration=4,
sps=osr,
)
+ self.gsm_gen_test_ab_0 = grgsm.gen_test_ab()
self.gsm_controlled_rotator_cc_0_0 = grgsm.controlled_rotator_cc(-ppm/1.0e6*2*math.pi*tx_freq/samp_rate)
self.gsm_controlled_rotator_cc_0 = grgsm.controlled_rotator_cc(ppm/1.0e6*2*math.pi*rx_freq/samp_rate)
+ self.gsm_burst_type_filter_0_0 = grgsm.burst_type_filter(([1,3]))
self.gsm_burst_type_filter_0 = grgsm.burst_type_filter(([3]))
self.gsm_burst_to_fn_time_0 = grgsm.burst_to_fn_time()
+ self.gsm_burst_timeslot_filter_0 = grgsm.burst_timeslot_filter(0)
self.digital_burst_shaper_xx_0 = digital.burst_shaper_cc((firdes.window(firdes.WIN_HANN, 16, 0)), 0, 20, False, "packet_len")
self.blocks_pdu_to_tagged_stream_0_0 = blocks.pdu_to_tagged_stream(blocks.byte_t, "packet_len")
##################################################
# Connections
##################################################
+ self.msg_connect((self.gsm_burst_timeslot_filter_0, 'out'), (self.gsm_gen_test_ab_0, 'bursts_in'))
self.msg_connect((self.gsm_burst_to_fn_time_0, 'fn_time_out'), (self.gsm_txtime_setter_0, 'fn_time'))
self.msg_connect((self.gsm_burst_type_filter_0, 'bursts_out'), (self.gsm_burst_to_fn_time_0, 'bursts_in'))
+ self.msg_connect((self.gsm_burst_type_filter_0_0, 'bursts_out'), (self.gsm_burst_timeslot_filter_0, 'in'))
+ self.msg_connect((self.gsm_gen_test_ab_0, 'bursts_out'), (self.gsm_txtime_setter_0, 'bursts_in'))
self.msg_connect((self.gsm_preprocess_tx_burst_0, 'bursts_out'), (self.blocks_pdu_to_tagged_stream_0_0, 'pdus'))
self.msg_connect((self.gsm_receiver_0, 'C0'), (self.gsm_burst_type_filter_0, 'bursts_in'))
- self.msg_connect((self.gsm_receiver_0, 'C0'), (self.gsm_trx_burst_if_0, 'bursts'))
+ self.msg_connect((self.gsm_receiver_0, 'C0'), (self.gsm_burst_type_filter_0_0, 'bursts_in'))
+ self.msg_connect((self.gsm_receiver_0, 'C0'), (self.ts_filter, 'in'))
self.msg_connect((self.gsm_trx_burst_if_0, 'bursts'), (self.gsm_txtime_setter_0, 'bursts_in'))
self.msg_connect((self.gsm_txtime_setter_0, 'bursts_out'), (self.gsm_preprocess_tx_burst_0, 'bursts_in'))
+ self.msg_connect((self.ts_filter, 'out'), (self.gsm_trx_burst_if_0, 'bursts'))
self.connect((self.blocks_pdu_to_tagged_stream_0_0, 0), (self.gsm_gmsk_mod_0, 0))
self.connect((self.digital_burst_shaper_xx_0, 0), (self.gsm_msg_to_tag_0_0, 0))
self.connect((self.gsm_controlled_rotator_cc_0, 0), (self.low_pass_filter_0_0, 0))
@@ -113,27 +122,32 @@
self.connect((self.low_pass_filter_0_0, 0), (self.gsm_receiver_0, 0))
self.connect((self.uhd_usrp_source_0, 0), (self.gsm_msg_to_tag_0, 0))
- def get_delay_correction(self):
- return self.delay_correction
+ def get_samp_rate(self):
+ return self.samp_rate
- def set_delay_correction(self, delay_correction):
- self.delay_correction = delay_correction
- self.gsm_txtime_setter_0.set_delay_correction(self.delay_correction+self.uplink_shift)
-
- def get_osr(self):
- return self.osr
-
- def set_osr(self, osr):
- self.osr = osr
- self.gsm_gmsk_mod_0.set_sps(self.osr)
-
- def get_ppm(self):
- return self.ppm
-
- def set_ppm(self, ppm):
- self.ppm = ppm
+ def set_samp_rate(self, samp_rate):
+ self.samp_rate = samp_rate
+ self.low_pass_filter_0_0.set_taps(firdes.low_pass(1, self.samp_rate, 125e3, 5e3, firdes.WIN_HAMMING, 6.76))
self.gsm_controlled_rotator_cc_0.set_phase_inc(self.ppm/1.0e6*2*math.pi*self.rx_freq/self.samp_rate)
self.gsm_controlled_rotator_cc_0_0.set_phase_inc(-self.ppm/1.0e6*2*math.pi*self.tx_freq/self.samp_rate)
+ self.uhd_usrp_sink_0.set_samp_rate(self.samp_rate)
+ self.uhd_usrp_source_0.set_samp_rate(self.samp_rate)
+
+ def get_tx_gain(self):
+ return self.tx_gain
+
+ def set_tx_gain(self, tx_gain):
+ self.tx_gain = tx_gain
+ self.uhd_usrp_sink_0.set_gain(self.tx_gain, 0)
+
+
+ def get_tx_freq(self):
+ return self.tx_freq
+
+ def set_tx_freq(self, tx_freq):
+ self.tx_freq = tx_freq
+ self.gsm_controlled_rotator_cc_0_0.set_phase_inc(-self.ppm/1.0e6*2*math.pi*self.tx_freq/self.samp_rate)
+ self.uhd_usrp_sink_0.set_center_freq(self.tx_freq, 0)
def get_rx_freq(self):
return self.rx_freq
@@ -151,23 +165,20 @@
self.uhd_usrp_source_0.set_gain(self.rx_gain, 0)
- def get_samp_rate(self):
- return self.samp_rate
+ def get_osr(self):
+ return self.osr
- def set_samp_rate(self, samp_rate):
- self.samp_rate = samp_rate
+ def set_osr(self, osr):
+ self.osr = osr
+ self.gsm_gmsk_mod_0.set_sps(self.osr)
+
+ def get_ppm(self):
+ return self.ppm
+
+ def set_ppm(self, ppm):
+ self.ppm = ppm
self.gsm_controlled_rotator_cc_0.set_phase_inc(self.ppm/1.0e6*2*math.pi*self.rx_freq/self.samp_rate)
self.gsm_controlled_rotator_cc_0_0.set_phase_inc(-self.ppm/1.0e6*2*math.pi*self.tx_freq/self.samp_rate)
- self.low_pass_filter_0_0.set_taps(firdes.low_pass(1, self.samp_rate, 125e3, 5e3, firdes.WIN_HAMMING, 6.76))
- self.uhd_usrp_sink_0.set_samp_rate(self.samp_rate)
- self.uhd_usrp_source_0.set_samp_rate(self.samp_rate)
-
- def get_timing_advance(self):
- return self.timing_advance
-
- def set_timing_advance(self, timing_advance):
- self.timing_advance = timing_advance
- self.gsm_txtime_setter_0.set_timing_advance(self.timing_advance)
def get_trx_base_port(self):
return self.trx_base_port
@@ -181,21 +192,12 @@
def set_trx_remote_addr(self, trx_remote_addr):
self.trx_remote_addr = trx_remote_addr
- def get_tx_freq(self):
- return self.tx_freq
+ def get_delay_correction(self):
+ return self.delay_correction
- def set_tx_freq(self, tx_freq):
- self.tx_freq = tx_freq
- self.gsm_controlled_rotator_cc_0_0.set_phase_inc(-self.ppm/1.0e6*2*math.pi*self.tx_freq/self.samp_rate)
- self.uhd_usrp_sink_0.set_center_freq(self.tx_freq, 0)
-
- def get_tx_gain(self):
- return self.tx_gain
-
- def set_tx_gain(self, tx_gain):
- self.tx_gain = tx_gain
- self.uhd_usrp_sink_0.set_gain(self.tx_gain, 0)
-
+ def set_delay_correction(self, delay_correction):
+ self.delay_correction = delay_correction
+ self.gsm_txtime_setter_0.set_delay_correction(self.delay_correction+self.uplink_shift)
def get_uplink_shift(self):
return self.uplink_shift
@@ -204,18 +206,25 @@
self.uplink_shift = uplink_shift
self.gsm_txtime_setter_0.set_delay_correction(self.delay_correction+self.uplink_shift)
+ def get_timing_advance(self):
+ return self.timing_advance
+
+ def set_timing_advance(self, timing_advance):
+ self.timing_advance = timing_advance
+ self.gsm_txtime_setter_0.set_timing_advance(self.timing_advance)
+
def argument_parser():
parser = OptionParser(option_class=eng_option, usage="%prog: [options]")
parser.add_option(
- "", "--delay-correction", dest="delay_correction", type="eng_float", default=eng_notation.num_to_str(285.616e-6),
- help="Set delay_correction [default=%default]")
+ "", "--samp-rate", dest="samp_rate", type="eng_float", default=eng_notation.num_to_str(13e6/12.0),
+ help="Set samp_rate [default=%default]")
parser.add_option(
- "", "--osr", dest="osr", type="intx", default=4,
- help="Set OSR [default=%default]")
+ "-r", "--tx-gain", dest="tx_gain", type="eng_float", default=eng_notation.num_to_str(30),
+ help="Set tx_gain [default=%default]")
parser.add_option(
- "", "--ppm", dest="ppm", type="eng_float", default=eng_notation.num_to_str(-1),
- help="Set Clock offset correction [default=%default]")
+ "-u", "--tx-freq", dest="tx_freq", type="eng_float", default=eng_notation.num_to_str(938900000),
+ help="Set tx_freq [default=%default]")
parser.add_option(
"-d", "--rx-freq", dest="rx_freq", type="eng_float", default=eng_notation.num_to_str(938600000),
help="Set rx_freq [default=%default]")
@@ -223,11 +232,11 @@
"-g", "--rx-gain", dest="rx_gain", type="eng_float", default=eng_notation.num_to_str(40),
help="Set rx_gain [default=%default]")
parser.add_option(
- "", "--samp-rate", dest="samp_rate", type="eng_float", default=eng_notation.num_to_str(13e6/12.0),
- help="Set samp_rate [default=%default]")
+ "", "--osr", dest="osr", type="intx", default=4,
+ help="Set OSR [default=%default]")
parser.add_option(
- "", "--timing-advance", dest="timing_advance", type="eng_float", default=eng_notation.num_to_str(0),
- help="Set timing_advance [default=%default]")
+ "", "--ppm", dest="ppm", type="eng_float", default=eng_notation.num_to_str(-1),
+ help="Set Clock offset correction [default=%default]")
parser.add_option(
"", "--trx-base-port", dest="trx_base_port", type="string", default="5700",
help="Set 5700 [default=%default]")
@@ -235,14 +244,14 @@
"", "--trx-remote-addr", dest="trx_remote_addr", type="string", default="127.0.0.1",
help="Set 127.0.0.1 [default=%default]")
parser.add_option(
- "-u", "--tx-freq", dest="tx_freq", type="eng_float", default=eng_notation.num_to_str(938900000),
- help="Set tx_freq [default=%default]")
- parser.add_option(
- "-r", "--tx-gain", dest="tx_gain", type="eng_float", default=eng_notation.num_to_str(30),
- help="Set tx_gain [default=%default]")
+ "", "--delay-correction", dest="delay_correction", type="eng_float", default=eng_notation.num_to_str(285.616e-6),
+ help="Set delay_correction [default=%default]")
parser.add_option(
"", "--uplink-shift", dest="uplink_shift", type="eng_float", default=eng_notation.num_to_str(-(6.0/1625000*(156.25)*3)),
help="Set uplink_shift [default=%default]")
+ parser.add_option(
+ "", "--timing-advance", dest="timing_advance", type="eng_float", default=eng_notation.num_to_str(0),
+ help="Set timing_advance [default=%default]")
return parser
@@ -250,7 +259,7 @@
if options is None:
options, _ = argument_parser().parse_args()
- tb = top_block_cls(delay_correction=options.delay_correction, osr=options.osr, ppm=options.ppm, rx_freq=options.rx_freq, rx_gain=options.rx_gain, samp_rate=options.samp_rate, timing_advance=options.timing_advance, trx_base_port=options.trx_base_port, trx_remote_addr=options.trx_remote_addr, tx_freq=options.tx_freq, tx_gain=options.tx_gain, uplink_shift=options.uplink_shift)
+ tb = top_block_cls(samp_rate=options.samp_rate, tx_gain=options.tx_gain, tx_freq=options.tx_freq, rx_freq=options.rx_freq, rx_gain=options.rx_gain, osr=options.osr, ppm=options.ppm, trx_base_port=options.trx_base_port, trx_remote_addr=options.trx_remote_addr, delay_correction=options.delay_correction, uplink_shift=options.uplink_shift, timing_advance=options.timing_advance)
tb.start()
tb.wait()