version 0.9.26
diff --git a/skeletons/Makefile.in b/skeletons/Makefile.in
index cadb8f4..b04d239 100644
--- a/skeletons/Makefile.in
+++ b/skeletons/Makefile.in
@@ -35,8 +35,8 @@
build_triplet = @build@
host_triplet = @host@
subdir = skeletons
-DIST_COMMON = README $(dist_pkgdata_DATA) $(srcdir)/Makefile.am \
- $(srcdir)/Makefile.in
+DIST_COMMON = README $(dist_pkgdata_DATA) $(nobase_dist_smods_DATA) \
+ $(srcdir)/Makefile.am $(srcdir)/Makefile.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/ax_check_compile_flag.m4 \
$(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \
@@ -147,8 +147,8 @@
am__base_list = \
sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__installdirs = "$(DESTDIR)$(pkgdatadir)"
-DATA = $(dist_pkgdata_DATA)
+am__installdirs = "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(smodsdir)"
+DATA = $(dist_pkgdata_DATA) $(nobase_dist_smods_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
@@ -225,6 +225,7 @@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
+MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
@@ -303,11 +304,17 @@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
-SUBDIRS = . standard-modules tests
+SUBDIRS = . tests
dist_pkgdata_DATA = \
- $(srcdir)/README \
- $(srcdir)/*.[ch] \
- $(srcdir)/file-dependencies
+ ${srcdir}/README \
+ ${srcdir}/*.[ch] \
+ ${srcdir}/file-dependencies
+
+smodsdir = $(pkgdata)
+nobase_dist_smods_DATA = \
+ standard-modules/README \
+ standard-modules/ASN1-Object-Identifier-Module.asn1 \
+ standard-modules/ASN1C-UsefulInformationObjectClasses.asn1
check_LTLIBRARIES = libasn1cskeletons.la
libasn1cskeletons_la_CFLAGS = $(TESTSUITE_CFLAGS)
@@ -369,7 +376,7 @@
.SUFFIXES:
.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
@@ -394,9 +401,9 @@
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(top_srcdir)/configure: $(am__configure_deps)
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4): $(am__aclocal_m4_deps)
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
@@ -864,6 +871,29 @@
test -n "$$files" || exit 0; \
echo " ( cd '$(DESTDIR)$(pkgdatadir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(pkgdatadir)" && rm -f $$files
+install-nobase_dist_smodsDATA: $(nobase_dist_smods_DATA)
+ @$(NORMAL_INSTALL)
+ test -z "$(smodsdir)" || $(MKDIR_P) "$(DESTDIR)$(smodsdir)"
+ @list='$(nobase_dist_smods_DATA)'; test -n "$(smodsdir)" || list=; \
+ $(am__nobase_list) | while read dir files; do \
+ xfiles=; for file in $$files; do \
+ if test -f "$$file"; then xfiles="$$xfiles $$file"; \
+ else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \
+ test -z "$$xfiles" || { \
+ test "x$$dir" = x. || { \
+ echo "$(MKDIR_P) '$(DESTDIR)$(smodsdir)/$$dir'"; \
+ $(MKDIR_P) "$(DESTDIR)$(smodsdir)/$$dir"; }; \
+ echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(smodsdir)/$$dir'"; \
+ $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(smodsdir)/$$dir" || exit $$?; }; \
+ done
+
+uninstall-nobase_dist_smodsDATA:
+ @$(NORMAL_UNINSTALL)
+ @list='$(nobase_dist_smods_DATA)'; test -n "$(smodsdir)" || list=; \
+ $(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(smodsdir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(smodsdir)" && rm -f $$files
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
@@ -1064,7 +1094,7 @@
all-am: Makefile $(DATA)
installdirs: installdirs-recursive
installdirs-am:
- for dir in "$(DESTDIR)$(pkgdatadir)"; do \
+ for dir in "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(smodsdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-recursive
@@ -1115,7 +1145,8 @@
info-am:
-install-data-am: install-dist_pkgdataDATA
+install-data-am: install-dist_pkgdataDATA \
+ install-nobase_dist_smodsDATA
install-dvi: install-dvi-recursive
@@ -1161,7 +1192,8 @@
ps-am:
-uninstall-am: uninstall-dist_pkgdataDATA uninstall-local
+uninstall-am: uninstall-dist_pkgdataDATA uninstall-local \
+ uninstall-nobase_dist_smodsDATA
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) check-am \
ctags-recursive install-am install-strip tags-recursive
@@ -1174,13 +1206,15 @@
install install-am install-data install-data-am \
install-dist_pkgdataDATA install-dvi install-dvi-am \
install-exec install-exec-am install-html install-html-am \
- install-info install-info-am install-man install-pdf \
- install-pdf-am install-ps install-ps-am install-strip \
- installcheck installcheck-am installdirs installdirs-am \
- maintainer-clean maintainer-clean-generic mostlyclean \
- mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
- pdf pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
- uninstall-dist_pkgdataDATA uninstall-local
+ install-info install-info-am install-man \
+ install-nobase_dist_smodsDATA install-pdf install-pdf-am \
+ install-ps install-ps-am install-strip installcheck \
+ installcheck-am installdirs installdirs-am maintainer-clean \
+ maintainer-clean-generic mostlyclean mostlyclean-compile \
+ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
+ tags tags-recursive uninstall uninstall-am \
+ uninstall-dist_pkgdataDATA uninstall-local \
+ uninstall-nobase_dist_smodsDATA
uninstall-local: