\batchmode
\documentclass[english,oneside,12pt]{book}
\usepackage[no-math]{fontspec}
\usepackage{MnSymbol}
\usepackage{xunicode}
\usepackage{xltxtra}

\usepackage[hmargin={1in,1in},vmargin={1.5in,1.5in}]{geometry}

\defaultfontfeatures{Mapping=tex-text}
\setmainfont{PT Sans}
\setsansfont{PT Sans}
\setmonofont{Consolas}

\usepackage{fancyhdr}
\usepackage{fancyref}
\usepackage{longtable}
\usepackage{booktabs}
\usepackage{url}
\usepackage{xcolor}
\usepackage{listings}
\usepackage{setspace}
\usepackage{unicode-math}
\usepackage{perpage}
\MakePerPage{footnote}

\setstretch{1.1}

% Courier 10 Pitch
\def\courierFont{Courier10 BT WGL4}
%\def\courierFont{Consolas}
\setmonofont[Scale=1.05]{\courierFont}
\setmathfont[Scale=1.05]{Cambria Math}


\makeatletter

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% Textclass specific LaTeX commands.
\lstloadlanguages{C,bash}
\newfontfamily\listingfont[Scale=1.05]{\courierFont}
\newfontfamily\inlinelistingfont[Scale=1.05]{\courierFont}
\definecolor{clrlcomment}{gray}{0.3}
\definecolor{clrlkeyword}{rgb}{0.588,0.145,0.18}
\newcommand{\listingkeyword}[1]{\color{clrlkeyword}{#1}}
\newcommand{\listingstring}[1]{\color{clrlcomment}{#1}}
\newcommand{\listingcomment}[1]{\color{clrlcomment}{#1}}
\lstset{tabsize=4,
  showstringspaces=false, 
  showtabs=false, 
  showspaces=false, 
  keywordstyle=\listingkeyword,
  stringstyle=\listingstring,
  commentstyle=\listingcomment,
  xleftmargin=\parindent,
  columns=fixed,
  escapechar=\%,
  texcl
}
\lstdefinestyle{listingStyle}{
        basicstyle=\small\listingfont,
        stringstyle=\listingstring,
        breaklines=true,
        breakatwhitespace=true,
        flexiblecolumns=false
        }
\lstdefinelanguage{asn1}{
	morekeywords={DEFINITIONS,BEGIN,END,AUTOMATIC,TAGS,SEQUENCE,SET,OF,CHOICE,OPTIONAL,INTEGER,MAX},
	morecomment=[l]{--},
	morecomment=[n]{/*}{*/}
        }

\lstnewenvironment{codesample}[1][]{\lstset{style=listingStyle,language=C,#1}}{}
\lstnewenvironment{bash}[1][]{\lstset{style=listingStyle,language=bash,#1}}{}
\lstnewenvironment{asn}[1][]{\lstset{style=listingStyle,language=asn1,#1}}{}

\newcommand{\code}[1]{\lstinline{#1}}
\newcommand{\cmd}[1]{\texttt{#1}}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% User specified LaTeX commands.
\usepackage{extramarks}
\lhead{\firstxmark}
\rfoot{\lastxmark}
\definecolor{clrlink}{rgb}{0,0.4,0}
\definecolor{clrurl}{rgb}{0,0,.6}
\usepackage[colorlinks=true,
	linkcolor={clrlink},
	citecolor={clrlink},
	urlcolor={clrurl},
	pdfauthor={Lev Walkin},
	pdftitle={Using the Open Source ASN.1 Compiler},
	pdfkeywords={ASN.1,asn1c,compiler},
	bookmarksopen,bookmarksopenlevel=1,
	pdffitwindow,
	xetex
]{hyperref}

\makeatother

\usepackage{babel}

\begin{document}

\title{Using the Open Source ASN.1 Compiler\\
\vspace*{0.4cm}
\Large Documentation for asn1c version \asnver{}}
\author{Lev Walkin <\href{mailto:vlm@lionet.info?Subject=asn1c}{vlm@lionet.info}>}

\pagestyle{fancy}
\fancyhead[L]{\leftmark}
\fancyhead[R]{\href{http://lionet.info/asn1c}{asn1c-\asnver}}
\maketitle

\tableofcontents{}

\chapter{\label{chap:Quick-start-examples}Quick start examples}

\section{A “Rectangle” converter and debugger}

One of the most common need is to create some sort of analysis tool
for the existing ASN.1 data files. Let's build a converter for existing
Rectangle binary files between BER, OER, PER, and XER (XML).

\begin{enumerate}
\item Create a file named \textbf{rectangle.asn} with the following contents:
\begin{asn}
RectangleModule DEFINITIONS ::= BEGIN

Rectangle ::= SEQUENCE {
    height  INTEGER,
    width   INTEGER
}

END
\end{asn}

\item Compile it into the set of .c and .h files using \cmd{asn1c} compiler:

\begin{bash}
asn1c -pdu=%\textbf{Rectangle}% -gen-OER -gen-PER %\textbf{rectangle.asn}%
\end{bash}

\item Create the converter and dumper:

\begin{bash}
make -f Makefile.am.example
\end{bash}

\item Done. The binary file converter is ready:

\begin{bash}
./converter-example -h
\end{bash}
\end{enumerate}

\section{A “Rectangle” Encoder}

This example will help you create a simple BER and XER encoder of
a ``Rectangle'' type used throughout this document.
\begin{enumerate}
\item Create a file named \textbf{rectangle.asn} with the following contents:

\begin{asn}
RectangleModule DEFINITIONS ::= BEGIN

Rectangle ::= SEQUENCE {
    height  INTEGER,
    width   INTEGER
}

END
\end{asn}
\item Compile it into the set of .c and .h files using asn1c compiler \cite{ASN1C}:

\begin{bash}
asn1c %\textbf{rectangle.asn}%
\end{bash}
\item Alternatively, use the Online ASN.1 compiler \cite{AONL} by uploading
the \textbf{rectangle.asn} file into the Web form and unpacking the
produced archive on your computer.
\item By this time, you should have gotten multiple files in the current
directory, including the \textbf{Rectangle.c} and \textbf{Rectangle.h}.
\item Create a main() routine which creates the Rectangle\_t structure in
memory and encodes it using BER and XER encoding rules. Let's name
the file \textbf{main.c}:

\begin{codesample}[basicstyle=\scriptsize\listingfont]
#include <stdio.h>
#include <sys/types.h>
#include <Rectangle.h>   /* Rectangle ASN.1 type  */

/* Write the encoded output into some FILE stream. */
static int write_out(const void *buffer, size_t size, void *app_key) {
    FILE *out_fp = app_key;
    size_t wrote = fwrite(buffer, 1, size, out_fp);
    return (wrote == size) ? 0 : -1;
}
 
int main(int ac, char **av) {
    Rectangle_t *rectangle; /* Type to encode        */
    asn_enc_rval_t ec;      /* Encoder return value  */

    /* Allocate the Rectangle_t */
    rectangle = calloc(1, sizeof(Rectangle_t)); /* not malloc! */
    if(!rectangle) {
        perror("calloc() failed");
        exit(1);
    }

    /* Initialize the Rectangle members */
    rectangle->height = 42;  /* any random value */
    rectangle->width  = 23;  /* any random value */

    /* BER encode the data if filename is given */
    if(ac < 2) {
        fprintf(stderr, "Specify filename for BER output\n");
    } else {
        const char *filename = av[1];
        FILE *fp = fopen(filename, "wb");   /* for BER output */
 
        if(!fp) {
          perror(filename);
          exit(1);
        }

        /* Encode the Rectangle type as BER (DER) */
        ec = der_encode(&asn_DEF_Rectangle, rectangle, write_out, fp);
        fclose(fp);
        if(ec.encoded == -1) {
          fprintf(stderr, "Could not encode Rectangle (at %\%%s)\n",
              ec.failed_type ? ec.failed_type->name : "unknown");
          exit(1);
        } else {
          fprintf(stderr, "Created %\%%s with BER encoded Rectangle\n", filename);
        }
    }

    /* Also print the constructed Rectangle XER encoded (XML) */
    xer_fprint(stdout, &asn_DEF_Rectangle, rectangle);

    return 0; /* Encoding finished successfully */
 }
\end{codesample}
\item Compile all files together using C compiler (varies by platform):

\begin{bash}
cc -I. -o %\textbf{\emph{rencode}} \emph{*.c}%
\end{bash}
\item Done. You have just created the BER and XER encoder of a Rectangle
type, named \textbf{rencode}!
\end{enumerate}

\section{\label{sec:A-Rectangle-Decoder}A “Rectangle” Decoder}

This example will help you to create a simple BER decoder of a simple
``Rectangle'' type used throughout this document.
\begin{enumerate}
\item Create a file named \textbf{rectangle.asn} with the following contents:

\begin{asn}
RectangleModule DEFINITIONS ::= BEGIN

Rectangle ::= SEQUENCE {
    height  INTEGER,
    width   INTEGER
}

END
\end{asn}
\item Compile it into the set of .c and .h files using asn1c compiler \cite{ASN1C}:

\begin{bash}
asn1c %\textbf{rectangle.asn}%
\end{bash}
\item Alternatively, use the Online ASN.1 compiler \cite{AONL} by uploading
the \textbf{rectangle.asn} file into the Web form and unpacking the
produced archive on your computer.
\item By this time, you should have gotten multiple files in the current
directory, including the \textbf{Rectangle.c} and \textbf{Rectangle.h}.
\item Create a main() routine which takes the binary input file, decodes
it as it were a BER-encoded Rectangle type, and prints out the text
(XML) representation of the Rectangle type. Let's name the file \textbf{main.c}:

\begin{codesample}[basicstyle=\scriptsize\listingfont]
#include <stdio.h>
#include <sys/types.h>
#include <Rectangle.h>   /* Rectangle ASN.1 type  */

int main(int ac, char **av) {
    char buf[1024];      /* Temporary buffer      */
    asn_dec_rval_t rval; /* Decoder return value  */
    Rectangle_t *%$\underbracket{\textrm{\listingfont rectangle = 0}}$%; /* Type to decode. %\textbf{\color{red}Note this 0\footnote{Forgetting to properly initialize the pointer to a destination structure is a major source of support requests.}!}% */
    FILE *fp;            /* Input file handler    */
    size_t size;         /* Number of bytes read  */
    char *filename;      /* Input file name */

    /* Require a single filename argument */
    if(ac != 2) {
        fprintf(stderr, "Usage: %\%%s <file.ber>\n", av[0]);
        exit(1);
    } else {
        filename = av[1];
    }

    /* Open input file as read-only binary */
    fp = fopen(filename, "rb");
    if(!fp) {
        perror(filename);
        exit(1);
    }

    /* Read up to the buffer size */
    size = fread(buf, 1, sizeof(buf), fp);
    fclose(fp);
    if(!size) {
        fprintf(stderr, "%\%%s: Empty or broken\n", filename);
        exit(1);
    }

    /* Decode the input buffer as Rectangle type */
    rval = ber_decode(0, &asn_DEF_Rectangle, (void **)&rectangle, buf, size);
    if(rval.code != RC_OK) {
        fprintf(stderr, "%\%%s: Broken Rectangle encoding at byte %\%%ld\n", filename, (long)rval.consumed);
        exit(1);
    }

    /* Print the decoded Rectangle type as XML */
    xer_fprint(stdout, &asn_DEF_Rectangle, rectangle);

    return 0; /* Decoding finished successfully */
}
\end{codesample}
\item Compile all files together using C compiler (varies by platform):

\begin{bash}
cc -I. -o %\textbf{\emph{rdecode}} \emph{*.c}%
\end{bash}
\item Done. You have just created the BER decoder of a Rectangle type,
named \textbf{rdecode}!
\end{enumerate}

\section{Adding constraints to a “Rectangle”}

This example shows how to add basic constraints to the ASN.1 specification
and how to invoke the constraints validation code in your application.
\begin{enumerate}

\item Create a file named \textbf{rectangle.asn} with the following contents:

\begin{asn}
RectangleModuleWithConstraints DEFINITIONS ::= BEGIN

Rectangle ::= SEQUENCE {
    height  INTEGER (0..100), -- Value range constraint
    width   INTEGER (0..MAX)  -- Makes width non-negative 
}

END
\end{asn}

\item Compile the file according to procedures shown in \fref{sec:A-Rectangle-Decoder}.
\item Modify the Rectangle type processing routine (you can start with the
main() routine shown in the \fref{sec:A-Rectangle-Decoder})
by placing the following snippet of code \emph{before} encoding and/or
\emph{after} decoding the Rectangle type:

\begin{codesample}[basicstyle=\scriptsize\listingfont]
int ret;           /* Return value */
char errbuf[128];  /* Buffer for error message */
size_t errlen = sizeof(errbuf);  /* Size of the buffer */

/* ... here goes the Rectangle %\emph{decoding}% code ... */

ret = asn_check_constraints(&asn_DEF_Rectangle, rectangle, errbuf, &errlen);
/* assert(errlen < sizeof(errbuf)); // you may rely on that */
if(ret) {
    fprintf(stderr, "Constraint validation failed: %\%%s\n", errbuf);
    /* exit(...); // Replace with appropriate action */
 }

/* ... here goes the Rectangle %\emph{encoding}% code ... */
\end{codesample}
\item Compile the resulting C code as shown in the previous chapters.
\item Test the constraints checking code by assigning integer value
101 to the \textbf{.height} member of the Rectangle structure, or
a negative value to the \textbf{.width} member.
The program will fail with ``Constraint validation failed'' message.
\item Done.
\end{enumerate}

\chapter{ASN.1 Compiler}

\section{The asn1c compiler tool}

The purpose of the ASN.1 compiler is to convert the specifications
in ASN.1 notation into some other language, such as C.

The compiler reads the specification and emits a series of target
language structures (C structs, unions, enums) describing the corresponding
ASN.1 types. The compiler also creates the code which allows automatic
serialization and deserialization of these structures using several
standardized encoding rules (BER, DER, OER, PER, XER).

Let's take the following ASN.1 example%
\footnote{\Fref{chap:Abstract-Syntax-Notation} provides a quick reference
on the ASN.1 notation.}:
\begin{asn}
RectangleModule DEFINITIONS ::= BEGIN

Rectangle ::= SEQUENCE {
    height  INTEGER,        -- Height of the rectangle
    width   INTEGER         -- Width of the rectangle
}

END
\end{asn}
The asn1c compiler reads this ASN.1 definition and produce the following
C type:
\begin{codesample}
typedef struct Rectangle_s {
    long height;
    long width;
} Rectangle_t;
\end{codesample}
The asn1c compiler also creates the code for converting this structure into
platform-independent wire representation and the decoder
of such wire representation back into local, machine-specific type.
These encoders and decoders are also called serializers and deserializers,
marshallers and unmarshallers, or codecs.

Compiling ASN.1 modules into C codecs can be as simple as invoking \cmd{asn1c}:
may be used to compile the ASN.1 modules:
\begin{bash}
asn1c %\emph{<modules.asn>}%
\end{bash}

If several ASN.1 modules contain interdependencies, all of the files
must be specified altogether:
\begin{bash}
asn1c %\emph{<module1.asn> <module2.asn> ...}%
\end{bash}
The compiler \textbf{-E} and \textbf{-EF} options are used for testing
the parser and the semantic fixer, respectively. These options will
instruct the compiler to dump out the parsed (and fixed, if \textbf{-F}
is involved) ASN.1 specification as it was understood
by the compiler. It might be useful to check whether a particular
syntactic construct is properly supported by the compiler.
\begin{bash}
asn1c %\textbf{-EF} \emph{<module-to-test.asn>}%
\end{bash}
The \textbf{-P} option is used to dump the compiled output on the
screen instead of creating a bunch of .c and .h files on disk in the
current directory. You would probably want to start with \textbf{-P}
option instead of creating a mess in your current directory. Another
option, \textbf{-R}, asks compiler to only generate the files which
need to be generated, and supress linking in the numerous support
files.

Print the compiled output instead of creating multiple source files:
\begin{bash}
asn1c %\textbf{-P} \emph{<module-to-compile-and-print.asn>}%
\end{bash}

\clearpage{}
\section{Compiler output}

The \cmd{asn1c} compiler produces a number of files:
\begin{itemize}
\item A set of .c and .h files for each type defined
in the ASN.1 specification. These files will be named similarly to
the ASN.1 types (\textbf{Rectangle.c} and \textbf{Rectangle.h} for the
RectangleModule ASN.1 module defined in the beginning of this document).
\item A set of helper .c and .h files which contain the generic encoders,
decoders and other useful routines.
Sometimes they are referred to by the term \emph{skeletons}.
There will be quite a few of them, some
of them are not even always necessary, but the overall amount of code
after compilation will be rather small anyway.
\item A \textbf{Makefile.am.libasncodecs} file which explicitly lists all the
generated files.
This makefile can be used on its own to build the just the codec library.
\item A \textbf{converter-example.c} file containing the \emph{int main()} function with a fully functioning encoder and data format converter. It can convert a given PDU between BER, XER and possibly OER and PER (if \cmd{-gen-OER} or \cmd{-gen-PER} options to \cmd{asn1c} were in effect). At some point you will want to replace this file with your own file containing the \emph{int main()} function.
\item A \textbf{Makefile.am.example} file which binds together
\textbf{Makefile.am.libasncodecs} and \textbf{converter-example.c}
to build a versatile converter and debugger for your data formats.
\end{itemize}
It is possible to compile everything with just a couple of instructions:
\begin{bash}
asn1c -pdu=%\emph{Rectangle}% *.asn
make -f Makefile.am.example                   # If you use `make`
\end{bash}
or
\begin{bash}
asn1c *.asn
cc -I. -DPDU=%\emph{Rectangle}% -o rectangle.exe *.c   # ... or like this
\end{bash}
Refer to the \fref{chap:Quick-start-examples} for a sample
\emph{int main()} function if you want some custom logic and not satisfied
with the supplied \emph{converter-example.c}.

\clearpage{}
\section{\label{sec:Command-line-options}Command line options}

The following table summarizes the \cmd{asn1c} command line options.

\renewcommand{\arraystretch}{1.33}
\begin{longtable}{lp{4in}}
\textbf{Stage Selection Options} & \textbf{Description}\\
\midrule
{\ttfamily -E} & {\small Stop after the parsing stage and print the reconstructed ASN.1
specification code to the standard output.}\\
{\ttfamily -F} & {\small Used together with \texttt{-E}, instructs the compiler to stop after
the ASN.1 syntax tree fixing stage and dump the reconstructed ASN.1
specification to the standard output.}\\
{\ttfamily -P} & {\small Dump the compiled output to the standard output instead of
creating the target language files on disk.}\\
{\ttfamily -R} & {\small Restrict the compiler to generate only the ASN.1 tables, omitting the usual support code.}\\
{\ttfamily -S~\emph{<directory>}} & {\small Use the specified directory with ASN.1 skeleton files.}\\
{\ttfamily -X} & {\small Generate the XML DTD for the specified ASN.1 modules.}\\\\
\textbf{Warning Options} & \textbf{Description}\\
\midrule
{\ttfamily -Werror} & {\small Treat warnings as errors; abort if any warning is produced.}\\
{\ttfamily -Wdebug-parser} & {\small Enable the parser debugging during the ASN.1 parsing stage.}\\
{\ttfamily -Wdebug-lexer} & {\small Enable the lexer debugging during the ASN.1 parsing stage.}\\
{\ttfamily -Wdebug-fixer} & {\small Enable the ASN.1 syntax tree fixer debugging during the fixing stage.}\\
{\ttfamily -Wdebug-compiler} & {\small Enable debugging during the actual compile time.}\\  \\
\textbf{Language Options} & \textbf{Description}\\
\midrule
{\ttfamily -fbless-SIZE} & {\small Allow SIZE() constraint for INTEGER, ENUMERATED, and other types for which this constraint is normally prohibited by the standard.
This is a violation of an ASN.1 standard and compiler may fail to produce the meaningful code.}\\
{\ttfamily -fcompound-names} & {\small Use complex names for C structures. Using complex names prevents
name clashes in case the module reuses the same identifiers in multiple
contexts.}\\
{\ttfamily -findirect-choice} & {\small When generating code for a CHOICE type, compile the CHOICE
members as indirect pointers instead of declaring them inline. Consider
using this option together with \texttt{-fno-include-deps}
to prevent circular references.}\\
{\ttfamily -fincludes-quoted} & {\small Generate \#include lines in "double" instead of <angle> quotes.}\\
{\ttfamily -fknown-extern-type=\emph{<name>}} & {\small Pretend the specified type is known. The compiler will assume
the target language source files for the given type have been provided
manually. }\\
{\ttfamily -fline-refs} & {\small Include ASN.1 module's line numbers in generated code comments.}\\
{\ttfamily -fno-constraints} & {\small Do not generate ASN.1 subtype constraint checking code. This
may produce a shorter executable.}\\
{\ttfamily -fno-include-deps} & {\small Do not generate courtesy \#include lines for non-critical dependencies.}\\
{\ttfamily -funnamed-unions} & {\small Enable  unnamed  unions in the definitions of target language's structures.}\\
{\ttfamily -fwide-types} & {\small Use the wide integer types (INTEGER\_t, REAL\_t) instead of machine's native data types (long, double). }\\\\
\textbf{Codecs Generation Options} & \textbf{Description}\\
\midrule
{\ttfamily -gen-OER} & {\small Generate the Octet Encoding Rules (OER) support code.}\\
{\ttfamily -gen-PER} & {\small Generate the Packed Encoding Rules (PER) support code.}\\
{\ttfamily -pdu=\{\textbf{all}|\textbf{auto}|\emph{Type}\}} & {\small Create a PDU table for specified types, or discover the Protocol Data Units automatically.
In case of \texttt{-pdu=\textbf{all}}, all ASN.1 types defined in all modules wil form a PDU table. In case of \texttt{-pdu=\textbf{auto}}, all types not referenced by any other type will form a PDU table. If \texttt{\emph{Type}} is an ASN.1 type identifier, it is added to a PDU table. The last form may be specified multiple times.}\\ \\
\textbf{Output Options} & \textbf{Description}\\
\midrule
{\ttfamily -print-class-matrix} & {\small When \texttt{-EF} options are given, this option instructs the compiler to print out the collected Information Object Class matrix.}\\
{\ttfamily -print-constraints} & {\small With \texttt{-EF}, this option instructs the compiler
to explain its internal understanding of subtype constraints.}\\
{\ttfamily -print-lines} & {\small Generate \texttt{``-{}- \#line''} comments
in \texttt{-E} output.}\\
\end{longtable}
\renewcommand{\arraystretch}{1}


\chapter{API reference}

\section{ASN\_STRUCT\_FREE}
\section{ASN\_STRUCT\_FREE\_CONTENTS\_ONLY}
\section{ASN\_STRUCT\_RESET}
\section{asn\_check\_constraints}
\section{asn\_decode}
\section{asn\_encode}
\section{asn\_encode\_to\_buffer}
\section{asn\_encode\_to\_new\_buffer}
\section{asn\_fprint}
\section{ber\_decode}
\section{der\_encode}
\section{der\_encode\_to\_buffer}
\section{oer\_decode}
\section{oer\_encode}
\section{oer\_encode\_to\_buffer}
\section{uper\_decode}
\section{uper\_decode\_complete}
\section{uper\_encode}
\section{uper\_encode\_to\_buffer}
\section{uper\_encode\_to\_new\_buffer}
\section{xer\_decode}
\section{xer\_encode}
\section{xer\_equivalent}
\section{xer\_fprint}

\chapter{API usage examples}

Let's start with including the necessary header files into your
application. Normally it is enough to include the header file of
the main PDU type. For our \emph{Rectangle} module, including the \emph{Rectangle.h} file is sufficient:
\begin{codesample}
#include <Rectangle.h>
\end{codesample}
The header files defines a C structure corresponding to the ASN.1
definition of a rectangle and the declaration of the ASN.1
\emph{type descriptor}. A type descriptor is a special globally accessible
object which is used as an argument to most of the API functions provided by
the ASN.1 codec. A type descriptor starts with \emph{asn\_DEF\_\ldots{}}. For example, here is the code which frees the Rectangle\_t structure:
\begin{codesample}
Rectangle_t *rect = ...;

ASN_STRUCT_FREE(%\textbf{asn\_DEF\_}%Rectangle, rect);
\end{codesample}
This code defines a \emph{rect} pointer which points to the Rectangle\_t
structure which needs to be freed. The second line uses a generic
\code{ASN\_STRUCT\_FREE()} macro which invokes the memory deallocation routine
created specifically for this Rectangle\_t structure.
The \emph{asn\_DEF\_Rectangle} is the type descriptor which holds
a collection of routines and operations defined for the Rectangle\_t structure.

\section{\label{sec:Generic-Encoding}Generic encoders and decoders}

Before we start describing specific encoders and decoders, let's step back
a little and check out a simple high level way.

The asn1c runtime supplies (see \emph{asn\_application.h}) two sets of high level functions, \emph{asn\_encode*} and \emph{asn\_decode*}, which take a transfer syntax selector as the argument. The transfer syntax selector is defined as this:

\begin{codesample}[basicstyle=\scriptsize\listingfont]
/*
 * A selection of ASN.1 Transfer Syntaxes to use with generalized encoders and decoders.
 */
enum asn_transfer_syntax {
    ATS_INVALID,
    ATS_NONSTANDARD_PLAINTEXT,
    ATS_BER,
    ATS_DER,
    ATS_CER,
    ATS_BASIC_OER,
    ATS_CANONICAL_OER,
    ATS_UNALIGNED_BASIC_PER,
    ATS_UNALIGNED_CANONICAL_PER,
    ATS_BASIC_XER,
    ATS_CANONICAL_XER,
};
\end{codesample}

Using this encoding selector, encoding and decoding becomes very generic:

\noindent{}Encoding:

\begin{codesample}[basicstyle=\scriptsize\listingfont]
uint8_t buffer[128];
size_t buf_size = sizeof(buffer);
asn_enc_rval_t er;

er = %\textbf{asn\_encode\emph{\_to\_buffer}}%(0, %\textbf{ATS\_DER}%, &asn_DEF_Rectangle, buffer, buf_size);

if(er.encoded > buf_size) {
    fprintf(stderr, "Buffer of size %\%%zu is too small for %\%%s, need %\%%zu\n",
        buf_size, asn_DEF_Rectangle.name, er.encoded);
}
\end{codesample}

\noindent{}Decoding:

\begin{codesample}[basicstyle=\scriptsize\listingfont]
Rectangle_t *%$\underbracket{\textrm{\listingfont rect = 0}}$%;    /* %\textbf{\color{red}Note this 0\footnote{Forgetting to properly initialize the pointer to a destination structure is a major source of support requests.}!}% */

... = %\textbf{asn\_decode}%(0, %\textbf{ATS\_BER}%, &asn_DEF_Rectangle, (void **)%$\underbracket{\textrm{\listingfont \&rect}}$%, buffer, buf_size);
\end{codesample}

\section{\label{sec:Decoding-BER}Decoding BER}

The Basic Encoding Rules describe the most widely used (by the ASN.1
community) way to encode and decode a given structure in a machine-independent
way. Several other encoding rules (CER, DER) define a more restrictive
versions of BER, so the generic BER parser is also capable of decoding
the data encoded by the CER and DER encoders. The opposite is not true.

\emph{The ASN.1 compiler provides the generic BER decoder which is
capable of decoding BER, CER and DER encoded data.}

The decoder is restartable (stream-oriented), which means that in
case the buffer has less data than it is expected, the decoder will
process whatever there is available and ask for more data to be provided.
Please note that the decoder may actually process less data than it
was given in the buffer, which means that you must be able to make
the next buffer contain the unprocessed part of the previous buffer.

Suppose, you have two buffers of encoded data: 100 bytes and 200 bytes.
\begin{itemize}
\item You can concatenate these buffers and feed the BER decoder with 300
bytes of data, or
\item You can feed it the first buffer of 100 bytes of data, realize that
the ber\_decoder consumed only 95 bytes from it and later feed the
decoder with 205 bytes buffer which consists of 5 unprocessed bytes
from the first buffer and the additional 200 bytes from the second
buffer.
\end{itemize}
This is not as convenient as it could be (the BER encoder could
consume the whole 100 bytes and keep these 5 bytes in some temporary
storage), but in case of existing stream based processing it might
actually fit well into existing algorithm. Suggestions are welcome.

Here is the example of BER decoding of a simple structure:

\begin{codesample}
Rectangle_t *
simple_deserializer(const void *buffer, size_t buf_size) {
    asn_dec_rval_t rval;
    Rectangle_t *%$\underbracket{\textrm{\listingfont rect = 0}}$%;    /* %\textbf{\color{red}Note this 0\footnote{Forgetting to properly initialize the pointer to a destination structure is a major source of support requests.}!}% */

    rval = %\textbf{asn\_DEF\_Rectangle.op->ber\_decoder}%(0,
          &asn_DEF_Rectangle,
          (void **)%$\underbracket{\textrm{\listingfont \&rect}}$%,    /* Decoder %\emph{changes}% the pointer */
          buffer, buf_size, 0);

    if(rval%\textbf{.code}% == RC_OK) {
        return rect;          /* Decoding succeeded */
    } else {
        /* Free the partially decoded rectangle */
        ASN_STRUCT_FREE(asn_DEF_Rectangle, rect);
        return 0;
    }
}
\end{codesample}

The code above defines a function, \emph{simple\_deserializer}, which
takes a buffer and its length and is expected to return a pointer
to the Rectangle\_t structure. Inside, it tries to convert the bytes
passed into the target structure (rect) using the BER decoder and
returns the rect pointer afterwards. If the structure cannot be deserialized,
it frees the memory which might be left allocated by the unfinished
\emph{ber\_decoder} routine and returns 0 (no data). (This \textbf{freeing
is necessary} because the ber\_decoder is a restartable procedure,
and may fail just because there is more data needs to be provided
before decoding could be finalized). The code above obviously does
not take into account the way the \emph{ber\_decoder()} failed, so
the freeing is necessary because the part of the buffer may already
be decoded into the structure by the time something goes wrong.

A little less wordy would be to invoke a globally available \emph{ber\_decode()}
function instead of dereferencing the asn\_DEF\_Rectangle type descriptor:
\begin{codesample}
rval = ber_decode(0, &asn_DEF_Rectangle, (void **)&rect, buffer, buf_size);
\end{codesample}
Note that the initial (asn\_DEF\_Rectangle.op->ber\_decoder) reference
is gone, and also the last argument (0) is no longer necessary.

These two ways of BER decoder invocations are fully equivalent.

The BER de\emph{coder} may fail because of (\emph{the following RC\_\ldots{}
codes are defined in ber\_decoder.h}):
\begin{itemize}
\item RC\_WMORE: There is more data expected than it is provided (stream
mode continuation feature);
\item RC\_FAIL: General failure to decode the buffer;
\item \ldots{} other codes may be defined as well.
\end{itemize}
Together with the return code (.code) the asn\_dec\_rval\_t type contains
the number of bytes which is consumed from the buffer. In the previous
hypothetical example of two buffers (of 100 and 200 bytes), the first
call to ber\_decode() would return with .code = RC\_WMORE and .consumed
= 95. The .consumed field of the BER decoder return value is \textbf{always}
valid, even if the decoder succeeds or fails with any other return
code.

Look into ber\_decoder.h for the precise definition of ber\_decode()
and related types.


\section{\label{sec:Encoding-DER}Encoding DER}

The Distinguished Encoding Rules is the \emph{canonical} variant of
BER encoding rules. The DER is best suited to encode the structures
where all the lengths are known beforehand. This is probably exactly
how you want to encode: either after a BER decoding or after a manual
fill-up, the target structure contains the data which size is implicitly
known before encoding. Among other uses, the DER encoding is used
to encode X.509 certificates.

As with BER decoder, the DER encoder may be invoked either directly
from the ASN.1 type descriptor (asn\_DEF\_Rectangle) or from the stand-alone
function, which is somewhat simpler:
\begin{codesample}
/*
 * This is the serializer itself.
 * It supplies the DER encoder with the
 * pointer to the custom output function.
 */
ssize_t
simple_serializer(FILE *ostream, Rectangle_t *rect) {
    asn_enc_rval_t er;  /* Encoder return value */

    er = der_encode(&asn_DEF_Rect, rect, write_stream, ostream);
    if(er%\textbf{.encoded}% == -1) {
        fprintf(stderr, "Cannot encode %\%%s: %\%%s\n",
            er%\textbf{.failed\_type}%->name, strerror(errno));
        return -1;
    } else {
        /* Return the number of bytes */
        return er.encoded;
    }
}
\end{codesample}
As you see, the DER encoder does not write into some sort of buffer.
It just invokes the custom function (possible, multiple
times) which would save the data into appropriate storage. The optional
argument \emph{app\_key} is opaque for the DER encoder code and just
used by \emph{\_write\_stream()} as the pointer to the appropriate
output stream to be used.

If the custom write function is not given (passed as 0), then the
DER encoder will essentially do the same thing (i.~e., encode the data)
but no callbacks will be invoked (so the data goes nowhere). It may
prove useful to determine the size of the structure's encoding before
actually doing the encoding%
\footnote{It is actually faster too: the encoder might skip over some computations
which aren't important for the size determination.%
}.

Look into der\_encoder.h for the precise definition of der\_encode()
and related types.


\section{\label{sec:Encoding-XER}Encoding XER}

The XER stands for XML Encoding Rules, where XML, in turn, is eXtensible
Markup Language, a text-based format for information exchange. The
encoder routine API comes in two flavors: stdio-based and callback-based.
With the callback-based encoder, the encoding process is very similar
to the DER one, described in \fref{sec:Encoding-DER}. The
following example uses the definition of write\_stream() from up there.
\begin{codesample}
/*
 * This procedure generates an XML document
 * by invoking the XER encoder.
 * NOTE: Do not copy this code verbatim!
 *       If the stdio output is necessary,
 *       use the xer_fprint() procedure instead.
 *       See %\fref{sec:Printing-the-target}%.
 */
int
print_as_XML(FILE *ostream, Rectangle_t *rect) {
    asn_enc_rval_t er;  /* Encoder return value */

    er = xer_encode(&asn_DEF_Rectangle, rect,
        XER_F_BASIC, /* BASIC-XER or CANONICAL-XER */
        write_stream, ostream);

    return (er.encoded == -1) ? -1 : 0;
}
\end{codesample}
Look into xer\_encoder.h for the precise definition of xer\_encode()
and related types.

See \fref{sec:Printing-the-target} for the example of stdio-based
XML encoder and other pretty-printing suggestions.


\section{\label{sec:Decoding-XER}Decoding XER}

The data encoded using the XER rules can be subsequently decoded using
the xer\_decode() API call:
\begin{codesample}
Rectangle_t *
XML_to_Rectangle(const void *buffer, size_t buf_size) {
    asn_dec_rval_t rval;
    Rectangle_t *%$\underbracket{\textrm{\listingfont rect = 0}}$%;    /* %\textbf{\color{red}Note this 0\footnote{Forgetting to properly initialize the pointer to a destination structure is a major source of support requests.}!}% */

    rval = xer_decode(0, &asn_DEF_Rectangle, (void **)&rect, buffer, buf_size);

    if(rval%\textbf{.code}% == RC_OK) {
        return rect;          /* Decoding succeeded */
    } else {
        /* Free partially decoded rect */
        ASN_STRUCT_FREE(asn_DEF_Rectangle, rect);
        return 0;
    }
}
\end{codesample}
The decoder takes both BASIC-XER and CANONICAL-XER encodings.

The decoder shares its data consumption properties with BER decoder;
please read the \fref{sec:Decoding-BER} to know more.

Look into xer\_decoder.h for the precise definition of xer\_decode()
and related types.


\section{\label{sec:Validating-the-target}Validating the target structure}

Sometimes the target structure needs to be validated. For example,
if the structure was created by the application (as opposed to being
decoded from some external source), some important information required
by the ASN.1 specification might be missing. On the other hand, the
successful decoding of the data from some external source does not
necessarily mean that the data is fully valid either. It might well
be the case that the specification describes some subtype constraints
that were not taken into account during decoding, and it would actually
be useful to perform the last check when the data is ready to be encoded
or when the data has just been decoded to ensure its validity according
to some stricter rules.

The asn\_check\_constraints() function checks the type for various
implicit and explicit constraints. It is recommended to use asn\_check\_constraints()
function after each decoding and before each encoding.

Look into constraints.h for the precise definition of asn\_check\_constraints()
and related types.


\section{\label{sec:Printing-the-target}Printing the target structure}

There are two ways to print the target structure: either invoke the
print\_struct member of the ASN.1 type descriptor, or using the asn\_fprint()
function, which is a simpler wrapper of the former:
\begin{codesample}
asn_fprint(stdout, &asn_DEF_Rectangle, rect);
\end{codesample}
Look into constr\_TYPE.h for the precise definition of asn\_fprint()
and related types.

Another practical alternative to this custom format printing would
be to invoke XER encoder. The default BASIC-XER encoder performs reasonable
formatting for the output to be useful and human readable. To invoke
the XER decoder in a manner similar to asn\_fprint(), use the xer\_fprint()
call:
\begin{codesample}
xer_fprint(stdout, &asn_DEF_Rectangle, rect);
\end{codesample}
See \fref{sec:Encoding-XER} for XML-related details.


\section{\label{sec:Freeing-the-target}Freeing the target structure}

Freeing the structure is slightly more complex than it may seem to.
When the ASN.1 structure is freed, all the members of the structure
and their submembers are recursively freed as well.
The ASN\_STRUCT\_FREE() macro helps with that.

But it might not always be feasible to free the whole structure.
In the following example, the application programmer defines a custom
structure with one ASN.1-derived member (rect).
\begin{codesample}
struct my_figure {       /* The custom structure */
    int flags;           /* <some custom member> */
    /* The type is generated by the ASN.1 compiler */
    Rectangle_t rect;
    /* other members of the structure */
};
\end{codesample}
This member is not a reference to the Rectangle\_t, but an in-place inclusion
of the Rectangle\_t structure.
If there's a need to free the \code{rect} member, the usual procedure of
freeing everything must not be applied to the \code{\&rect} pointer itself,
because it does not point to the beginning of memory block allocated by
the memory allocation routine, but instead lies within a block allocated for
the my\_figure structure.

To solve this problem, in addition to ASN\_STRUCT\_FREE() macro, the asn1c
skeletons define the ASN\_STRUCT\_RESET() macro which doesn't free the passed
pointer and instead resets the structure into the clean and safe state.
\begin{codesample}
/* %\textbf{1. Rectangle\_t is defined within my\_figure}% */
struct my_figure {
    Rectangle_t rect;
} *mf = ...;
/*
 * Freeing the Rectangle_t
 * without freeing the mf->rect area.
 */
ASN_STRUCT_RESET(asn_DEF_Rectangle, &mf->rect);
  
/* %\textbf{2. Rectangle\_t is a stand-alone pointer}% */
Rectangle_t *rect = ...;
/*
 * Freeing the Rectangle_t
 * and freeing the rect pointer.
 */
ASN_STRUCT_FREE(asn_DEF_Rectangle, rect);
\end{codesample}
It is safe to invoke both macros with the target structure pointer
set to 0 (NULL). In this case, the function will do nothing.

\chapter{\label{chap:Abstract-Syntax-Notation}Abstract Syntax Notation: ASN.1}

\emph{This chapter defines some basic ASN.1 concepts and describes
several most widely used types. It is by no means an authoritative
or complete reference. For more complete ASN.1 description, please
refer to Olivier Dubuisson's book \cite{Dub00} or the ASN.1 body
of standards itself \cite{ITU-T/ASN.1}.}

The Abstract Syntax Notation One is used to formally describe the
data transmitted across the network. Two communicating parties may employ
different formats of their native data types (e.~g., different number
of bits for the native integer type), thus it is important to have
a way to describe the data in a manner which is independent from the
particular machine's representation.
The ASN.1 specifications are used to achieve the following:
\begin{itemize}
\item The specification expressed in the ASN.1 notation is a formal and
precise way to communicate the structure of data to human readers;
\item The ASN.1 specifications may be used as input for automatic compilers
which produce the code for some target language (C, C++, Java, etc)
to encode and decode the data according to some encoding formats.
Several such encoding formats (called Transfer Encoding Rules)
have been defined by the ASN.1 standard.
\end{itemize}
Consider the following example:
\begin{asn}
Rectangle ::= SEQUENCE {
    height  INTEGER,
    width   INTEGER
}
\end{asn}
This ASN.1 specification describes a constructed type, \emph{Rectangle},
containing two integer fields. This specification may tell the reader
that there exists this kind of data structure and that some entity
may be prepared to send or receive it. The question on \emph{how}
that entity is going to send or receive the \emph{encoded data} is
outside the scope of ASN.1. For example, this data structure may be
encoded according to some encoding rules and sent to the destination
using the TCP protocol. The ASN.1 specifies several ways of encoding
(or ``serializing'', or ``marshaling'') the data: BER, PER, XER
and others, including CER and DER derivatives from BER.

The complete specification must be wrapped in a module, which looks
like this:
\begin{asn}
RectangleModule1
    { iso org(3) dod(6) internet(1) private(4)
      enterprise(1) spelio(9363) software(1)
      asn1c(5) docs(2) rectangle(1) 1 }
    DEFINITIONS AUTOMATIC TAGS ::=
BEGIN

-- This is a comment which describes nothing.
Rectangle ::= SEQUENCE {
    height  INTEGER,        -- Height of the rectangle
    width   INTEGER         -- Width of the rectangle
}

END
\end{asn}
The module header consists of module name (RectangleModule1), the
module object identifier (\{...\}), a keyword ``DEFINITIONS'', a
set of module flags (AUTOMATIC TAGS) and ``::= BEGIN''. The module
ends with an ``END'' statement.


\section{Some of the ASN.1 Basic Types}


\subsection{The BOOLEAN type}

The BOOLEAN type models the simple binary TRUE/FALSE, YES/NO, ON/OFF
or a similar kind of two-way choice.


\subsection{The INTEGER type}

The INTEGER type is a signed natural number type without any restrictions
on its size. If the automatic checking on INTEGER value bounds are
necessary, the subtype constraints must be used.
\begin{asn}
SimpleInteger ::= INTEGER

-- An integer with a very limited range
SmallPositiveInt ::= INTEGER (0..127)

-- Integer, negative
NegativeInt ::= INTEGER (MIN..0)
\end{asn}

\subsection{The ENUMERATED type}

The ENUMERATED type is semantically equivalent to the INTEGER type
with some integer values explicitly named.
\begin{asn}
FruitId ::= ENUMERATED { apple(1), orange(2) }

-- The numbers in braces are optional,
-- the enumeration can be performed
-- automatically by the compiler
ComputerOSType ::= ENUMERATED {
    FreeBSD,          -- acquires value 0
    Windows,          -- acquires value 1
    Solaris(5),       -- remains 5
    Linux,            -- becomes 6
    MacOS             -- becomes 7
}
\end{asn}

\subsection{The OCTET STRING type}

This type models the sequence of 8-bit bytes. This may be used to
transmit some opaque data or data serialized by other types of encoders
(e.~g., video file, photo picture, etc).

\subsection{The OBJECT IDENTIFIER type}

The OBJECT IDENTIFIER is used to represent the unique identifier of
any object, starting from the very root of the registration tree.
If your organization needs to uniquely identify something (a router,
a room, a person, a standard, or whatever), you are encouraged to
get your own identification subtree at \url{http://www.iana.org/protocols/forms.htm}.

For example, the very first ASN.1 module in this Chapter (RectangleModule1)
has the following OBJECT IDENTIFIER: 1 3 6 1 4 1 9363 1 5 2 1 1.
\begin{asn}
ExampleOID ::= OBJECT IDENTIFIER

rectangleModule1-oid ExampleOID
  ::= { 1 3 6 1 4 1 9363 1 5 2 1 1 }

-- An identifier of the Internet.
internet-id OBJECT IDENTIFIER
  ::= { iso(1) identified-organization(3)
        dod(6) internet(1) }
\end{asn}
As you see, names are optional.


\subsection{The RELATIVE-OID type}

The RELATIVE-OID type has the semantics of a subtree of an OBJECT
IDENTIFIER. There may be no need to repeat the whole sequence of numbers
from the root of the registration tree where the only thing of interest
is some of the tree's subsequence.
\begin{asn}
this-document RELATIVE-OID ::= { docs(2) usage(1) }

this-example RELATIVE-OID ::= {
    this-document assorted-examples(0) this-example(1) }
\end{asn}

\section{Some of the ASN.1 String Types}


\subsection{The IA5String type}

This is essentially the ASCII, with 128 character codes available
(7 lower bits of an 8-bit byte).


\subsection{The UTF8String type}

This is the character string which encodes the full Unicode range
(4 bytes) using multibyte character sequences.


\subsection{The NumericString type}

This type represents the character string with the alphabet consisting
of numbers (``0'' to ``9'') and a space.


\subsection{The PrintableString type}

The character string with the following alphabet: space, ``\textbf{'}''
(single quote), ``\textbf{(}'', ``\textbf{)}'', ``\textbf{+}'',
``\textbf{,}'' (comma), ``\textbf{-}'', ``\textbf{.}'', ``\textbf{/}'',
digits (``0'' to ``9''), ``\textbf{:}'', ``\textbf{=}'', ``\textbf{?}'',
upper-case and lower-case letters (``A'' to ``Z'' and ``a''
to ``z'').


\subsection{The VisibleString type}

The character string with the alphabet which is more or less a subset
of ASCII between the space and the ``\textbf{\textasciitilde{}}''
symbol (tilde).

Alternatively, the alphabet may be described as the PrintableString
alphabet presented earlier, plus the following characters: ``\textbf{!}'',
``\textbf{``}'', ``\textbf{\#}'', ``\textbf{\$}'', ``\textbf{\%}'',
``\textbf{\&}'', ``\textbf{*}'', ``\textbf{;}'', ``\textbf{<}'',
``\textbf{>}'', ``\textbf{{[}}'', ``\textbf{\textbackslash{}}'',
``\textbf{{]}}'', ``\textbf{\textasciicircum{}}'', ``\textbf{\_}'',
``\textbf{`}`` (single left quote), ``\textbf{\{}'', ``\textbf{|}'',
``\textbf{\}}'', ``\textbf{\textasciitilde{}}''.


\section{ASN.1 Constructed Types}


\subsection{The SEQUENCE type}

This is an ordered collection of other simple or constructed types.
The SEQUENCE constructed type resembles the C ``struct'' statement.
\begin{asn}
Address ::= SEQUENCE {
    -- The apartment number may be omitted
    apartmentNumber      NumericString OPTIONAL,
    streetName           PrintableString,
    cityName             PrintableString,
    stateName            PrintableString,
    -- This one may be omitted too
    zipNo                NumericString OPTIONAL
}
\end{asn}

\subsection{The SET type}

This is a collection of other simple or constructed types. Ordering
is not important. The data may arrive in the order which is different
from the order of specification. Data is encoded in the order not
necessarily corresponding to the order of specification.


\subsection{The CHOICE type}

This type is just a choice between the subtypes specified in it. The
CHOICE type contains at most one of the subtypes specified, and it
is always implicitly known which choice is being decoded or encoded.
This one resembles the C ``union'' statement.

The following type defines a response code, which may be either an
integer code or a boolean ``true''/``false'' code.
\begin{asn}
ResponseCode ::= CHOICE {
    intCode    INTEGER,
    boolCode   BOOLEAN
}
\end{asn}

\subsection{The SEQUENCE OF type}

This one is the list (array) of simple or constructed types:
\begin{asn}
-- Example 1
ManyIntegers ::= SEQUENCE OF INTEGER

-- Example 2
ManyRectangles ::= SEQUENCE OF Rectangle

-- More complex example:
-- an array of structures defined in place.
ManyCircles ::= SEQUENCE OF SEQUENCE {
                            radius INTEGER
                            }
\end{asn}

\subsection{The SET OF type}

The SET OF type models the bag of structures. It resembles the SEQUENCE
OF type, but the order is not important. The elements may arrive
in the order which is not necessarily the same as the in-memory order
on the remote machines.
\begin{asn}
-- A set of structures defined elsewhere
SetOfApples :: SET OF Apple

-- Set of integers encoding the kind of a fruit
FruitBag ::= SET OF ENUMERATED { apple, orange }
\end{asn}
\begin{thebibliography}{ITU-T/ASN.1}
\bibitem[ASN1C]{ASN1C}The Open Source ASN.1 Compiler. \url{http://lionet.info/asn1c}

\bibitem[AONL]{AONL}Online ASN.1 Compiler. \url{http://lionet.info/asn1c/asn1c.cgi}

\bibitem[Dub00]{Dub00}Olivier Dubuisson --- \emph{ASN.1 Communication
between heterogeneous systems} --- Morgan Kaufmann Publishers, 2000.
\url{http://asn1.elibel.tm.fr/en/book/}. ISBN:0-12-6333361-0.

\bibitem[ITU-T/ASN.1]{ITU-T/ASN.1}ITU-T Study Group 17 --- Languages
for Telecommunication Systems \url{http://www.itu.int/ITU-T/studygroups/com17/languages/}
\end{thebibliography}

\end{document}