automake-1.9


git-svn-id: https://asn1c.svn.sourceforge.net/svnroot/asn1c/trunk@1131 59561ff5-6e30-0410-9f3c-9617f08c8826
diff --git a/skeletons/Makefile.in b/skeletons/Makefile.in
index 3a83447..0552500 100644
--- a/skeletons/Makefile.in
+++ b/skeletons/Makefile.in
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.8.4 from Makefile.am.
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
+# 2003, 2004, 2005  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -34,7 +34,9 @@
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
+build_triplet = @build@
 host_triplet = @host@
+target_triplet = @target@
 subdir = skeletons
 DIST_COMMON = README $(dist_pkgdata_DATA) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in
@@ -53,6 +55,12 @@
 	install-recursive installcheck-recursive installdirs-recursive \
 	pdf-recursive ps-recursive uninstall-info-recursive \
 	uninstall-recursive
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 am__installdirs = "$(DESTDIR)$(pkgdatadir)"
 dist_pkgdataDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(dist_pkgdata_DATA)
@@ -137,6 +145,8 @@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
 bindir = @bindir@
 build = @build@
 build_alias = @build_alias@
@@ -186,9 +196,9 @@
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  skeletons/Makefile'; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  skeletons/Makefile'; \
 	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  skeletons/Makefile
+	  $(AUTOMAKE) --foreign  skeletons/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -221,7 +231,7 @@
 	test -z "$(pkgdatadir)" || $(mkdir_p) "$(DESTDIR)$(pkgdatadir)"
 	@list='$(dist_pkgdata_DATA)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  f=$(am__strip_dir) \
 	  echo " $(dist_pkgdataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgdatadir)/$$f'"; \
 	  $(dist_pkgdataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgdatadir)/$$f"; \
 	done
@@ -229,7 +239,7 @@
 uninstall-dist_pkgdataDATA:
 	@$(NORMAL_UNINSTALL)
 	@list='$(dist_pkgdata_DATA)'; for p in $$list; do \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  f=$(am__strip_dir) \
 	  echo " rm -f '$(DESTDIR)$(pkgdatadir)/$$f'"; \
 	  rm -f "$(DESTDIR)$(pkgdatadir)/$$f"; \
 	done
@@ -241,7 +251,13 @@
 #     (which will cause the Makefiles to be regenerated when you run `make');
 # (2) otherwise, pass the desired values on the `make' command line.
 $(RECURSIVE_TARGETS):
-	@set fnord $$MAKEFLAGS; amf=$$2; \
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
 	dot_seen=no; \
 	target=`echo $@ | sed s/-recursive//`; \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
@@ -253,7 +269,7 @@
 	    local_target="$$target"; \
 	  fi; \
 	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	  || eval $$failcom; \
 	done; \
 	if test "$$dot_seen" = "no"; then \
 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
@@ -261,7 +277,13 @@
 
 mostlyclean-recursive clean-recursive distclean-recursive \
 maintainer-clean-recursive:
-	@set fnord $$MAKEFLAGS; amf=$$2; \
+	@failcom='exit 1'; \
+	for f in x $$MAKEFLAGS; do \
+	  case $$f in \
+	    *=* | --[!k]*);; \
+	    *k*) failcom='fail=yes';; \
+	  esac; \
+	done; \
 	dot_seen=no; \
 	case "$@" in \
 	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
@@ -282,7 +304,7 @@
 	    local_target="$$target"; \
 	  fi; \
 	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+	  || eval $$failcom; \
 	done && test -z "$$fail"
 tags-recursive:
 	list='$(SUBDIRS)'; for subdir in $$list; do \
@@ -316,7 +338,7 @@
 	fi; \
 	list='$(SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
-	    test -f $$subdir/TAGS && \
+	    test ! -f $$subdir/TAGS || \
 	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
 	  fi; \
 	done; \
@@ -327,7 +349,7 @@
 	  $(AWK) '    { files[$$0] = 1; } \
 	       END { for (i in files) print i; }'`; \
 	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -z "$$unique" && unique=$$empty_fix; \
+	  test -n "$$unique" || unique=$$empty_fix; \
 	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 	    $$tags $$unique; \
 	fi
@@ -381,15 +403,17 @@
 	    || exit 1; \
 	  fi; \
 	done
-	list='$(SUBDIRS)'; for subdir in $$list; do \
+	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 	  if test "$$subdir" = .; then :; else \
 	    test -d "$(distdir)/$$subdir" \
-	    || mkdir "$(distdir)/$$subdir" \
+	    || $(mkdir_p) "$(distdir)/$$subdir" \
 	    || exit 1; \
+	    distdir=`$(am__cd) $(distdir) && pwd`; \
+	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
 	    (cd $$subdir && \
 	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="../$(top_distdir)" \
-	        distdir="../$(distdir)/$$subdir" \
+	        top_distdir="$$top_distdir" \
+	        distdir="$$distdir/$$subdir" \
 	        distdir) \
 	      || exit 1; \
 	  fi; \
@@ -421,7 +445,7 @@
 clean-generic:
 
 distclean-generic:
-	-rm -f $(CONFIG_CLEAN_FILES)
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
diff --git a/skeletons/standard-modules/Makefile.in b/skeletons/standard-modules/Makefile.in
index 5a0e242..f19c5dd 100644
--- a/skeletons/standard-modules/Makefile.in
+++ b/skeletons/standard-modules/Makefile.in
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.8.4 from Makefile.am.
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
+# 2003, 2004, 2005  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -34,7 +34,9 @@
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
+build_triplet = @build@
 host_triplet = @host@
+target_triplet = @target@
 subdir = skeletons/standard-modules
 DIST_COMMON = README $(dist_smods_DATA) $(srcdir)/Makefile.am \
 	$(srcdir)/Makefile.in
@@ -47,6 +49,12 @@
 CONFIG_CLEAN_FILES =
 SOURCES =
 DIST_SOURCES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
 am__installdirs = "$(DESTDIR)$(smodsdir)"
 dist_smodsDATA_INSTALL = $(INSTALL_DATA)
 DATA = $(dist_smods_DATA)
@@ -128,6 +136,8 @@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
 bindir = @bindir@
 build = @build@
 build_alias = @build_alias@
@@ -177,9 +187,9 @@
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  skeletons/standard-modules/Makefile'; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  skeletons/standard-modules/Makefile'; \
 	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  skeletons/standard-modules/Makefile
+	  $(AUTOMAKE) --foreign  skeletons/standard-modules/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -212,7 +222,7 @@
 	test -z "$(smodsdir)" || $(mkdir_p) "$(DESTDIR)$(smodsdir)"
 	@list='$(dist_smods_DATA)'; for p in $$list; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  f=$(am__strip_dir) \
 	  echo " $(dist_smodsDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(smodsdir)/$$f'"; \
 	  $(dist_smodsDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(smodsdir)/$$f"; \
 	done
@@ -220,7 +230,7 @@
 uninstall-dist_smodsDATA:
 	@$(NORMAL_UNINSTALL)
 	@list='$(dist_smods_DATA)'; for p in $$list; do \
-	  f="`echo $$p | sed -e 's|^.*/||'`"; \
+	  f=$(am__strip_dir) \
 	  echo " rm -f '$(DESTDIR)$(smodsdir)/$$f'"; \
 	  rm -f "$(DESTDIR)$(smodsdir)/$$f"; \
 	done
@@ -284,7 +294,7 @@
 clean-generic:
 
 distclean-generic:
-	-rm -f $(CONFIG_CLEAN_FILES)
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
diff --git a/skeletons/tests/Makefile.in b/skeletons/tests/Makefile.in
index d0f980f..fcc953b 100644
--- a/skeletons/tests/Makefile.in
+++ b/skeletons/tests/Makefile.in
@@ -1,8 +1,8 @@
-# Makefile.in generated by automake 1.8.4 from Makefile.am.
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004  Free Software Foundation, Inc.
+# 2003, 2004, 2005  Free Software Foundation, Inc.
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
@@ -13,8 +13,6 @@
 # PARTICULAR PURPOSE.
 
 @SET_MAKE@
-SOURCES = check-GeneralizedTime.c check-INTEGER.c check-OCTET_STRING.c check-OIDs.c check-PER.c check-REAL.c check-UTCTime.c check-UTF8String.c check-XER.c check-ber_tlv_tag.c check-length.c
-
 srcdir = @srcdir@
 top_srcdir = @top_srcdir@
 VPATH = @srcdir@
@@ -35,7 +33,9 @@
 NORMAL_UNINSTALL = :
 PRE_UNINSTALL = :
 POST_UNINSTALL = :
+build_triplet = @build@
 host_triplet = @host@
+target_triplet = @target@
 check_PROGRAMS = check-ber_tlv_tag$(EXEEXT) check-length$(EXEEXT) \
 	check-OIDs$(EXEEXT) check-GeneralizedTime$(EXEEXT) \
 	check-OCTET_STRING$(EXEEXT) check-UTF8String$(EXEEXT) \
@@ -97,23 +97,13 @@
 DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)
 depcomp = $(SHELL) $(top_srcdir)/depcomp
 am__depfiles_maybe = depfiles
-@AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/check-GeneralizedTime.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/check-INTEGER.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/check-OCTET_STRING.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/check-OIDs.Po ./$(DEPDIR)/check-PER.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/check-REAL.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/check-UTCTime.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/check-UTF8String.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/check-XER.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/check-ber_tlv_tag.Po \
-@AMDEP_TRUE@	./$(DEPDIR)/check-length.Po
 COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
 	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) \
+LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \
 	$(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
 	$(AM_CFLAGS) $(CFLAGS)
 CCLD = $(CC)
-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
 	$(AM_LDFLAGS) $(LDFLAGS) -o $@
 SOURCES = check-GeneralizedTime.c check-INTEGER.c check-OCTET_STRING.c \
 	check-OIDs.c check-PER.c check-REAL.c check-UTCTime.c \
@@ -203,6 +193,8 @@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
 bindir = @bindir@
 build = @build@
 build_alias = @build_alias@
@@ -251,9 +243,9 @@
 	      exit 1;; \
 	  esac; \
 	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  skeletons/tests/Makefile'; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  skeletons/tests/Makefile'; \
 	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  skeletons/tests/Makefile
+	  $(AUTOMAKE) --foreign  skeletons/tests/Makefile
 .PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
@@ -334,24 +326,21 @@
 @am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \
 @am__fastdepCC_TRUE@	then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	depfile='$(DEPDIR)/$*.Plo' tmpdepfile='$(DEPDIR)/$*.TPlo' @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
 @am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
 
 mostlyclean-libtool:
@@ -385,7 +374,7 @@
 	  $(AWK) '    { files[$$0] = 1; } \
 	       END { for (i in files) print i; }'`; \
 	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -z "$$unique" && unique=$$empty_fix; \
+	  test -n "$$unique" || unique=$$empty_fix; \
 	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 	    $$tags $$unique; \
 	fi
@@ -467,20 +456,20 @@
 	  skipped=""; \
 	  if test "$$skip" -ne 0; then \
 	    skipped="($$skip tests were not run)"; \
-	    test `echo "$$skipped" | wc -c` -gt `echo "$$banner" | wc -c` && \
+	    test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \
 	      dashes="$$skipped"; \
 	  fi; \
 	  report=""; \
 	  if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \
 	    report="Please report to $(PACKAGE_BUGREPORT)"; \
-	    test `echo "$$report" | wc -c` -gt `echo "$$banner" | wc -c` && \
+	    test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \
 	      dashes="$$report"; \
 	  fi; \
 	  dashes=`echo "$$dashes" | sed s/./=/g`; \
 	  echo "$$dashes"; \
 	  echo "$$banner"; \
-	  test -n "$$skipped" && echo "$$skipped"; \
-	  test -n "$$report" && echo "$$report"; \
+	  test -z "$$skipped" || echo "$$skipped"; \
+	  test -z "$$report" || echo "$$report"; \
 	  echo "$$dashes"; \
 	  test "$$failed" -eq 0; \
 	else :; fi
@@ -537,7 +526,7 @@
 clean-generic:
 
 distclean-generic:
-	-rm -f $(CONFIG_CLEAN_FILES)
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"