do not add unnecessary symbols
diff --git a/examples/sample.source.LDAP3/Makefile b/examples/sample.source.LDAP3/Makefile
index c563356..21ee000 100644
--- a/examples/sample.source.LDAP3/Makefile
+++ b/examples/sample.source.LDAP3/Makefile
@@ -146,6 +146,12 @@
ASN_MODULE_SOURCES+=xer_decoder.c
ASN_MODULE_HEADERS+=xer_encoder.h
ASN_MODULE_SOURCES+=xer_encoder.c
+ASN_MODULE_HEADERS+=oer_decoder.h
+ASN_MODULE_SOURCES+=oer_decoder.c
+ASN_MODULE_HEADERS+=oer_encoder.h
+ASN_MODULE_SOURCES+=oer_encoder.c
+ASN_MODULE_HEADERS+=oer_support.h
+ASN_MODULE_SOURCES+=oer_support.c
ASN_MODULE_HEADERS+=per_support.h
ASN_MODULE_SOURCES+=per_support.c
ASN_MODULE_HEADERS+=per_decoder.h
@@ -163,19 +169,19 @@
# This file may be used as an input for make(3)
# Remove the lines below to convert it into a pure .am file
TARGET = ldap3dump
-CFLAGS += -DASN_CONVERTER_TITLE="Lightweight Directory Access Protocol V3 decoder" -DHAVE_CONFIG_H -DJUNKTEST -D_DEFAULT_SOURCE -DPDU=LDAPMessage -I.
+CPPFLAGS += -DASN_CONVERTER_TITLE="Lightweight Directory Access Protocol V3 decoder" -DHAVE_CONFIG_H -DJUNKTEST -D_DEFAULT_SOURCE -DASN_DISABLE_OER_SUPPORT -DASN_DISABLE_PER_SUPPORT -DPDU=LDAPMessage -I.
OBJS=${ASN_MODULE_SOURCES:.c=.o} ${ASN_CONVERTER_SOURCES:.c=.o}
all: LDAPMessage.c $(TARGET)
$(TARGET): ${OBJS}
- $(CC) $(CFLAGS) -o $(TARGET) ${OBJS} $(LDFLAGS) $(LIBS)
+ $(CC) $(CPPFLAGS) -o $(TARGET) ${OBJS} $(LDFLAGS) $(LIBS)
.SUFFIXES:
.SUFFIXES: .c .o
.c.o:
- $(CC) $(CFLAGS) -o $@ -c $<
+ $(CC) $(CFLAGS) $(CPPFLAGS) -o $@ -c $<
clean:
rm -f $(TARGET)
@@ -198,7 +204,7 @@
ASN1MODULES="../rfc4511-Lightweight-Directory-Access-Protocol-V3.asn1" \
ASN1PDU=LDAPMessage \
PROGNAME=ldap3dump \
- CFLAGS="" \
+ CPPFLAGS="" \
../sample.makefile.regen
check: ${TARGET} check-ber check-xer check-per
diff --git a/examples/sample.source.MEGACO/Makefile b/examples/sample.source.MEGACO/Makefile
index baa4f66..339b188 100644
--- a/examples/sample.source.MEGACO/Makefile
+++ b/examples/sample.source.MEGACO/Makefile
@@ -268,6 +268,12 @@
ASN_MODULE_SOURCES+=xer_decoder.c
ASN_MODULE_HEADERS+=xer_encoder.h
ASN_MODULE_SOURCES+=xer_encoder.c
+ASN_MODULE_HEADERS+=oer_decoder.h
+ASN_MODULE_SOURCES+=oer_decoder.c
+ASN_MODULE_HEADERS+=oer_encoder.h
+ASN_MODULE_SOURCES+=oer_encoder.c
+ASN_MODULE_HEADERS+=oer_support.h
+ASN_MODULE_SOURCES+=oer_support.c
ASN_MODULE_HEADERS+=per_support.h
ASN_MODULE_SOURCES+=per_support.c
ASN_MODULE_HEADERS+=per_decoder.h
@@ -285,19 +291,19 @@
# This file may be used as an input for make(3)
# Remove the lines below to convert it into a pure .am file
TARGET = megaco-dump
-CFLAGS += -DHAVE_CONFIG_H -DJUNKTEST -D_DEFAULT_SOURCE -DPDU=MegacoMessage -I.
+CPPFLAGS += -DHAVE_CONFIG_H -DJUNKTEST -D_DEFAULT_SOURCE -DASN_DISABLE_OER_SUPPORT -DASN_DISABLE_PER_SUPPORT -DPDU=MegacoMessage -I.
OBJS=${ASN_MODULE_SOURCES:.c=.o} ${ASN_CONVERTER_SOURCES:.c=.o}
all: MegacoMessage.c $(TARGET)
$(TARGET): ${OBJS}
- $(CC) $(CFLAGS) -o $(TARGET) ${OBJS} $(LDFLAGS) $(LIBS)
+ $(CC) $(CPPFLAGS) -o $(TARGET) ${OBJS} $(LDFLAGS) $(LIBS)
.SUFFIXES:
.SUFFIXES: .c .o
.c.o:
- $(CC) $(CFLAGS) -o $@ -c $<
+ $(CC) $(CFLAGS) $(CPPFLAGS) -o $@ -c $<
clean:
rm -f $(TARGET)
@@ -319,7 +325,7 @@
ASN1MODULES="../rfc3525-MEDIA-GATEWAY-CONTROL.asn1" \
ASN1PDU=MegacoMessage \
PROGNAME=megaco-dump \
- CFLAGS="" \
+ CPPFLAGS="" \
../sample.makefile.regen
check: ${TARGET} check-ber check-xer check-per
diff --git a/examples/sample.source.RRC/Makefile b/examples/sample.source.RRC/Makefile
index 09ca566..ed5b967 100644
--- a/examples/sample.source.RRC/Makefile
+++ b/examples/sample.source.RRC/Makefile
@@ -4722,6 +4722,12 @@
ASN_MODULE_SOURCES+=xer_decoder.c
ASN_MODULE_HEADERS+=xer_encoder.h
ASN_MODULE_SOURCES+=xer_encoder.c
+ASN_MODULE_HEADERS+=oer_decoder.h
+ASN_MODULE_SOURCES+=oer_decoder.c
+ASN_MODULE_HEADERS+=oer_encoder.h
+ASN_MODULE_SOURCES+=oer_encoder.c
+ASN_MODULE_HEADERS+=oer_support.h
+ASN_MODULE_SOURCES+=oer_support.c
ASN_MODULE_HEADERS+=per_support.h
ASN_MODULE_SOURCES+=per_support.c
ASN_MODULE_HEADERS+=per_decoder.h
@@ -4740,19 +4746,19 @@
# This file may be used as an input for make(3)
# Remove the lines below to convert it into a pure .am file
TARGET = rrc-dump
-CFLAGS += -DHAVE_CONFIG_H -DJUNKTEST -D_DEFAULT_SOURCE -DPDU=DL_DCCH_Message -DASN_PDU_COLLECTION -I.
+CPPFLAGS += -DHAVE_CONFIG_H -DJUNKTEST -D_DEFAULT_SOURCE -DASN_DISABLE_OER_SUPPORT -DPDU=DL_DCCH_Message -DASN_PDU_COLLECTION -I.
OBJS=${ASN_MODULE_SOURCES:.c=.o} ${ASN_CONVERTER_SOURCES:.c=.o}
all: DL-DCCH-Message.c $(TARGET)
$(TARGET): ${OBJS}
- $(CC) $(CFLAGS) -o $(TARGET) ${OBJS} $(LDFLAGS) $(LIBS)
+ $(CC) $(CPPFLAGS) -o $(TARGET) ${OBJS} $(LDFLAGS) $(LIBS)
.SUFFIXES:
.SUFFIXES: .c .o
.c.o:
- $(CC) $(CFLAGS) -o $@ -c $<
+ $(CC) $(CFLAGS) $(CPPFLAGS) -o $@ -c $<
clean:
rm -f $(TARGET)
@@ -4774,7 +4780,7 @@
ASN1MODULES="../rrc-7.1.0.asn1" \
ASN1PDU=DL-DCCH-Message \
PROGNAME=rrc-dump \
- CFLAGS="" \
+ CPPFLAGS="" \
../sample.makefile.regen
check: ${TARGET} check-ber check-xer check-per